From: Takashi Iwai <tiwai@suse.de>
To: Patrick Shirkey <pshirkey@boosthardware.com>
Cc: Jaroslav Kysela <perex@suse.cz>,
"alsa-devel@lists.sourceforge.net"
<alsa-devel@lists.sourceforge.net>,
jackit-devel@lists.sourceforge.net
Subject: Re: quattro multi plugin.
Date: Mon, 22 Jul 2002 13:10:24 +0200 [thread overview]
Message-ID: <s5hwuroow67.wl@alsa2.suse.de> (raw)
In-Reply-To: <3D3BD760.7060606@boosthardware.com>
At Mon, 22 Jul 2002 18:58:56 +0900,
Patrick Shirkey wrote:
>
> Jaroslav Kysela wrote:
> >
> > Please, try again. I've just added missing support for 24-bit samples to
> > one alsa-lib's function.
> >
>
> Things seem to be getting worse with jack at least. I cannot use the
> 96000hz setting because that requires jack to have 24 bit support which
> it doesn't yet. 32 or 16bit are supported.
you can use 32bit if it's accessed via plug layer.
alsa-lib converts from 32 to 24bit.
(you need anyway route layer, so the latency stays as before.)
> So If I use the .asoundrc that takashi sent I get an instant hang with
> only two channels being found and if I use my one I get the same but
> with four channels being found.
>
> By instant hang I mean:
>
> ----
> jackd -v -d alsa -d q4b
> jackd 0.37.1
> Copyright 2001-2002 Paul Davis and others.
> jackd comes with ABSOLUTELY NO WARRANTY
> This is free software, and you are welcome to redistribute it
> under certain conditions; see the file COPYING for details
>
> 611 waiting for signals
> creating alsa driver ... q4b|1024|2|48000|swmon
> new client: alsa_pcm, id = 1 type 1 @ 0x8067930 fd = 14
> port alsa_pcm:in_1 buf shm key 0x164398c5 at offset 4096 bi = 0x8066d00
> registered port alsa_pcm:in_1, offset = 4096
> port alsa_pcm:in_2 buf shm key 0x164398c5 at offset 8192 bi = 0x8066d10
> registered port alsa_pcm:in_2, offset = 8192
> port alsa_pcm:in_3 buf shm key 0x164398c5 at offset 12288 bi = 0x8066d20
> registered port alsa_pcm:in_3, offset = 12288
> port alsa_pcm:in_4 buf shm key 0x164398c5 at offset 16384 bi = 0x8066d30
> registered port alsa_pcm:in_4, offset = 16384
> registered port alsa_pcm:out_1, offset = 0
> registered port alsa_pcm:out_2, offset = 0
> registered port alsa_pcm:out_3, offset = 0
> registered port alsa_pcm:out_4, offset = 0
> -- jack_rechain_graph():
> client alsa_pcm: inprocess client, execution_order=0.
> ----
>
> Then my system locks hard.
hmm... could you simply try playback of 4 channels?
you can find a sample wav in
http://www.tsp.ece.mcgill.ca/Docs/AudioFormats/WAVE/WAVE.html
or, try 4 channel recording via aplay.
Takashi
-------------------------------------------------------
This sf.net email is sponsored by:ThinkGeek
Welcome to geek heaven.
http://thinkgeek.com/sf
next prev parent reply other threads:[~2002-07-22 11:10 UTC|newest]
Thread overview: 13+ messages / expand[flat|nested] mbox.gz Atom feed top
2002-07-19 7:11 quattro multi plugin Patrick Shirkey
2002-07-19 8:42 ` Patrick Shirkey
2002-07-19 13:56 ` Patrick Shirkey
2002-07-19 17:51 ` Takashi Iwai
2002-07-19 23:44 ` Thorsten Haas
2002-07-20 16:09 ` Patrick Shirkey
2002-07-20 16:22 ` Patrick Shirkey
2002-07-20 16:41 ` Patrick Shirkey
2002-07-21 8:20 ` Jaroslav Kysela
2002-07-22 9:58 ` Patrick Shirkey
2002-07-22 11:10 ` Takashi Iwai [this message]
2002-07-22 11:21 ` Patrick Shirkey
2002-07-28 8:14 ` quattro multi plugin - 4 channel recording Patrick Shirkey
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=s5hwuroow67.wl@alsa2.suse.de \
--to=tiwai@suse.de \
--cc=alsa-devel@lists.sourceforge.net \
--cc=jackit-devel@lists.sourceforge.net \
--cc=perex@suse.cz \
--cc=pshirkey@boosthardware.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.