From mboxrd@z Thu Jan 1 00:00:00 1970 From: Takashi Iwai Subject: Re: SGI/HAL2 architecture detection Date: Mon, 06 Oct 2003 12:53:24 +0200 Sender: alsa-devel-admin@lists.sourceforge.net Message-ID: References: <20031003212654.GA28811@dbz.icequake.net> <20031003221042.GB28811@dbz.icequake.net> Mime-Version: 1.0 (generated by SEMI 1.14.5 - "Awara-Onsen") Content-Type: text/plain; charset=US-ASCII Return-path: In-Reply-To: <20031003221042.GB28811@dbz.icequake.net> Errors-To: alsa-devel-admin@lists.sourceforge.net List-Help: List-Post: List-Subscribe: , List-Unsubscribe: , List-Archive: To: Ryan Underwood Cc: alsa-devel@lists.sourceforge.net List-Id: alsa-devel@alsa-project.org At Fri, 3 Oct 2003 17:10:42 -0500, Ryan Underwood wrote: > > > Ok, I fixed this, and then discover that a Makefile is not generated in > /hal2 directory, so the build dies at that point. What should I use for > a Makefile template for this directory? Has anyone built this successfully? are you using 2.6 kernel? if yes, it's good chance to move hal2 driver to alsa-kernel tree, i.e. eventually to 2.6 linux tree, so that more people can see it. (so far, it's been in alsa-driver tree because no one tested it :) please move hal2 directory under alsa-kernel, edit Makefile and Kconfig there. and on alsa-driver tree, you can do just like parisc directory. Takashi ------------------------------------------------------- This sf.net email is sponsored by:ThinkGeek Welcome to geek heaven. http://thinkgeek.com/sf