From mboxrd@z Thu Jan 1 00:00:00 1970 From: Takashi Iwai Subject: Re: opti92x-ad1848 and sequencer Date: Thu, 13 Mar 2003 14:15:19 +0100 Sender: alsa-devel-admin@lists.sourceforge.net Message-ID: References: <3E7073F5.2B2E8D2D@srr.ro> Mime-Version: 1.0 (generated by SEMI 1.14.4 - "Hosorogi") Content-Type: text/plain; charset=US-ASCII Return-path: In-Reply-To: <3E7073F5.2B2E8D2D@srr.ro> Errors-To: alsa-devel-admin@lists.sourceforge.net List-Help: List-Post: List-Subscribe: , List-Unsubscribe: , List-Archive: To: Andrei Boros Cc: alsa-devel@lists.sourceforge.net List-Id: alsa-devel@alsa-project.org At Thu, 13 Mar 2003 14:05:09 +0200, Andrei Boros wrote: > > > Attempting to compile the above driver as recommended with sequencer > support too, I get the following. > > gate:~/install/alsa-cvs/alsa-driver# depmod -ae > /lib/modules/2.2.23/misc/snd-opl3-synth.o: unresolved symbol(s) > snd_seq_instr_find_R8fff548c > snd_seq_instr_free_use_Rf8a556ca > snd_midi_channel_free_set_Rcfb054f4 > snd_seq_instr_event_R7bdca607 > snd_seq_instr_list_new_Rb61f0009 > snd_seq_instr_list_free_R192a43fe > snd_midi_process_event_R789db613 > snd_midi_channel_alloc_set_R7b6f0fa7 > snd_seq_fm_init_Ra759f38d please check whether snd.o and other sequencer modules are built. if not, it means that sequencer macro in Makefile doesn't work somehow. Takashi ------------------------------------------------------- This SF.net email is sponsored by:Crypto Challenge is now open! Get cracking and register here for some mind boggling fun and the chance of winning an Apple iPod: http://ads.sourceforge.net/cgi-bin/redirect.pl?thaw0031en