From mboxrd@z Thu Jan 1 00:00:00 1970 From: Takashi Iwai Subject: Re: M-Audio Revolution 7.1 Date: Mon, 10 Feb 2003 13:13:30 +0100 Sender: alsa-devel-admin@lists.sourceforge.net Message-ID: References: <10366.165.228.129.12.1044847107.squirrel@home.cowardly.homeip.net> <1044878241.3145.14.camel@home.cowardly.homeip.net> Mime-Version: 1.0 (generated by SEMI 1.14.4 - "Hosorogi") Content-Type: text/plain; charset=US-ASCII Return-path: In-Reply-To: <1044878241.3145.14.camel@home.cowardly.homeip.net> Errors-To: alsa-devel-admin@lists.sourceforge.net List-Help: List-Post: List-Subscribe: , List-Unsubscribe: , List-Archive: To: Bruce Cooper Cc: alsa-devel@lists.sourceforge.net List-Id: alsa-devel@alsa-project.org At 10 Feb 2003 19:57:21 +0800, Bruce Cooper wrote: > > Hi, > > I just checked, and it is the envy24HT, as you predicted. The chip is > also marked ICE1712A instead of ICE1712. Oh well, that will make life > more difficult. I still want to do it though. can you see which codec chips on the board? if it's an ac97 codec (or multi ac97 codecs), then we'll be able to add the support without difficulties. if it's another types and connected over i2s (and if the codec chips need proper initialization), it would be tough - we need to know the communcation protocol between envy24ht and the codecs (most likely over i2c). ciao, Takashi ------------------------------------------------------- This SF.NET email is sponsored by: SourceForge Enterprise Edition + IBM + LinuxWorld = Something 2 See! http://www.vasoftware.com