From: sashiko-bot@kernel.org
To: "Fil Dunsky" <filipp.dunsky@gmail.com>
Cc: linux-serial@vger.kernel.org, robh@kernel.org,
devicetree@vger.kernel.org, conor+dt@kernel.org
Subject: Re: [PATCH RFC v2 08/10] ARM: dts: cortina: Add CS7542 SoC and Securifi Almond+ board
Date: Tue, 06 Oct 2026 18:23:33 +0000 [thread overview]
Message-ID: <sashiko-outbox-162338@kernel.org> (raw)
In-Reply-To: <20261006-b4-cs75xx-v2-8-b7d6e1e24d44@gmail.com>
> From: Fil Dunsky <filipp.dunsky@gmail.com>
>
> Add a minimal description of the Cortina Systems CS7542 SoC: the two
> Cortex-A9 cores, SCU, GIC, global timer, private timer and watchdog,
> PL310 L2 cache controller and the four on-chip UARTs.
>
> The peripheral clock (APB) runs at 100, 150 or 170 MHz depending on the
> boot strap pins. Until there is a driver for the global control block
> that reads the straps, model it as a fixed clock whose rate is provided
> by the board.
>
> The Securifi Almond+ is a touchscreen Wi-Fi router with 512 MiB of DDR3,
> 512 MiB of NAND flash, a QCA8337 switch, QCA9880 and AR9580 Wi-Fi and an
> ASM1042 USB 3.0 controller behind the SoC PCIe root ports. For now,
> describe the memory, the console UART and a ramoops region, and reserve
> the top 64 MiB of RAM which the vendor firmware hands to the packet
> engine queue manager.
>
> Signed-off-by: Fil Dunsky <filipp.dunsky@gmail.com>
Sashiko has reviewed this patch and found no issues. It looks great!
--
Sashiko AI review · https://sashiko.dev/#/patchset/20261006-b4-cs75xx-v2-0-b7d6e1e24d44@gmail.com?part=8
next prev parent reply other threads:[~2026-10-06 18:23 UTC|newest]
Thread overview: 36+ messages / expand[flat|nested] mbox.gz Atom feed top
2026-10-06 18:17 [PATCH RFC v2 00/10] ARM: Add support for Cortina Systems CS75xx and Securifi Almond+ Fil Dunsky
2026-10-06 18:17 ` Fil Dunsky via B4 Relay
2026-10-06 18:17 ` [PATCH RFC v2 01/10] dt-bindings: vendor-prefixes: Add Securifi Fil Dunsky
2026-10-06 18:17 ` Fil Dunsky via B4 Relay
2026-10-06 18:18 ` sashiko-bot
2026-10-06 18:17 ` [PATCH RFC v2 02/10] dt-bindings: arm: Add Cortina Systems CS7542 and Securifi Almond+ Fil Dunsky
2026-10-06 18:17 ` Fil Dunsky via B4 Relay
2026-10-06 18:20 ` sashiko-bot
2026-10-06 18:17 ` [PATCH RFC v2 03/10] dt-bindings: arm: cpus: Add Cortina Systems CS7542 enable method Fil Dunsky
2026-10-06 18:17 ` Fil Dunsky via B4 Relay
2026-10-06 18:21 ` sashiko-bot
2026-10-06 18:17 ` [PATCH RFC v2 04/10] ARM: goldengate: Add support for the CS75xx SoC family Fil Dunsky
2026-10-06 18:17 ` Fil Dunsky via B4 Relay
2026-10-06 18:31 ` sashiko-bot
2026-10-07 11:40 ` Linus Walleij
2026-10-06 18:17 ` [PATCH RFC v2 05/10] ARM: debug: Add Cortina Systems CS75xx UART0 support Fil Dunsky
2026-10-06 18:17 ` Fil Dunsky via B4 Relay
2026-10-06 18:25 ` sashiko-bot
2026-10-06 18:17 ` [PATCH RFC v2 06/10] dt-bindings: serial: Add Cortina Systems CS7542 UART Fil Dunsky
2026-10-06 18:17 ` Fil Dunsky via B4 Relay
2026-10-06 18:19 ` sashiko-bot
2026-10-07 11:40 ` Linus Walleij
2026-10-06 18:17 ` [PATCH RFC v2 07/10] tty: serial: Add Cortina UART driver Fil Dunsky
2026-10-06 18:17 ` Fil Dunsky via B4 Relay
2026-10-06 18:27 ` sashiko-bot
2026-10-06 18:17 ` [PATCH RFC v2 08/10] ARM: dts: cortina: Add CS7542 SoC and Securifi Almond+ board Fil Dunsky
2026-10-06 18:17 ` Fil Dunsky via B4 Relay
2026-10-06 18:23 ` sashiko-bot [this message]
2026-10-07 11:41 ` Linus Walleij
2026-10-06 18:17 ` [PATCH RFC v2 09/10] ARM: multi_v7_defconfig: Enable Cortina Systems CS75xx support Fil Dunsky
2026-10-06 18:17 ` Fil Dunsky via B4 Relay
2026-10-06 18:21 ` sashiko-bot
2026-10-07 11:42 ` Linus Walleij
2026-10-06 18:17 ` [PATCH RFC v2 10/10] MAINTAINERS: Add entry for Cortina Systems CS75xx Fil Dunsky
2026-10-06 18:17 ` Fil Dunsky via B4 Relay
2026-10-07 11:42 ` Linus Walleij
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=sashiko-outbox-162338@kernel.org \
--to=sashiko-bot@kernel.org \
--cc=conor+dt@kernel.org \
--cc=devicetree@vger.kernel.org \
--cc=filipp.dunsky@gmail.com \
--cc=linux-serial@vger.kernel.org \
--cc=robh@kernel.org \
--cc=sashiko-reviews@lists.linux.dev \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.