From: sashiko-bot@kernel.org
To: "Alexander Stein" <alexander.stein@ew.tq-group.com>
Cc: imx@lists.linux.dev, devicetree@vger.kernel.org, robh@kernel.org,
conor+dt@kernel.org, Frank.Li@kernel.org
Subject: Re: [PATCH 2/5] arm64: dts: imx8qxp: Add display controller subsystem
Date: Tue, 13 Oct 2026 11:29:55 +0000 [thread overview]
Message-ID: <sashiko-outbox-169627@kernel.org> (raw)
In-Reply-To: <20261013111737.998282-3-alexander.stein@ew.tq-group.com>
Thank you for your contribution! Sashiko AI review found 1 potential issue(s) to consider:
- [Medium] arm64: dts: Missing power-domains and compatible override for dc0_irqsteer
--
commit ae70e9d2f5935bf44872ed0bd30be554653b06e0
Author: Liu Ying <victor.liu@nxp.com>
arm64: dts: imx8qxp: Add display controller subsystem
Add display controller subsystem in i.MX8qxp SoC.
> diff --git a/arch/arm64/boot/dts/freescale/imx8-ss-dc0.dtsi b/arch/arm64/boot/dts/freescale/imx8-ss-dc0.dtsi
> new file mode 100644
> --- /dev/null
> +++ b/arch/arm64/boot/dts/freescale/imx8-ss-dc0.dtsi
[ ... ]
> +dc0_subsys: bus@56000000 {
[ ... ]
> + dc0_irqsteer: interrupt-controller@56000000 {
> + compatible = "fsl,imx-irqsteer";
> + reg = <0x56000000 0x1000>;
> + interrupt-controller;
> + interrupt-parent = <&gic>;
> + #interrupt-cells = <1>;
[ ... ]
> + clocks = <&dc0_lis_lpcg IMX_LPCG_CLK_4>;
> + clock-names = "ipg";
> + fsl,channel = <0>;
> + fsl,num-irqs = <512>;
> + };
[Severity: Medium]
Is the dc0_irqsteer node missing a power-domains property?
If it lacks power-domains = <&pd IMX_SC_R_DC_0>;, could this trigger a bus
fault (SError) during boot or suspend/resume cycles if the irqsteer driver
accesses its registers when the IMX_SC_R_DC_0 power domain is off?
> diff --git a/arch/arm64/boot/dts/freescale/imx8qxp-ss-dc.dtsi b/arch/arm64/boot/dts/freescale/imx8qxp-ss-dc.dtsi
> new file mode 100644
> --- /dev/null
> +++ b/arch/arm64/boot/dts/freescale/imx8qxp-ss-dc.dtsi
> @@ -0,0 +1,236 @@
> +// SPDX-License-Identifier: GPL-2.0+
> +/*
> + * Copyright 2024 NXP
> + */
> +
> +&dc0 {
> + compatible = "fsl,imx8qxp-dc";
> +};
[Severity: Medium]
Should there be an override for &dc0_irqsteer in this file to set its
SoC-specific compatible string?
For example, setting compatible = "fsl,imx8qxp-irqsteer", "fsl,imx-irqsteer";
here would ensure the node matches correctly. Omitting the SoC-specific
compatible string might mask the missing power domain violation from
dtbs_check and prevent SoC-specific driver quirks from applying.
--
Sashiko AI review · https://sashiko.dev/#/patchset/20261013111737.998282-1-alexander.stein@ew.tq-group.com?part=2
next prev parent reply other threads:[~2026-10-13 11:29 UTC|newest]
Thread overview: 10+ messages / expand[flat|nested] mbox.gz Atom feed top
2026-10-13 11:17 [PATCH 0/5] LVDS support for TQMa8Xx Alexander Stein
2026-10-13 11:17 ` [PATCH 1/5] dt-bindings: firmware: imx: Add SCU controlled display pixel link nodes Alexander Stein
2026-10-13 11:17 ` [PATCH 2/5] arm64: dts: imx8qxp: Add display controller subsystem Alexander Stein
2026-10-13 11:29 ` sashiko-bot [this message]
2026-10-13 14:05 ` Alexander Stein
2026-10-13 11:17 ` [PATCH 3/5] arm64: dts: imx8qxp: Add MIPI-LVDS combo subsystems Alexander Stein
2026-10-13 11:17 ` [PATCH 4/5] arm64: dts: freescale: Add LVDS overlays for TQMa8Xx Alexander Stein
2026-10-13 11:28 ` sashiko-bot
2026-10-13 13:03 ` Alexander Stein
2026-10-13 11:17 ` [PATCH 5/5] arm64: dts: freescale: Add dual-channel LVDS overlay " Alexander Stein
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=sashiko-outbox-169627@kernel.org \
--to=sashiko-bot@kernel.org \
--cc=Frank.Li@kernel.org \
--cc=alexander.stein@ew.tq-group.com \
--cc=conor+dt@kernel.org \
--cc=devicetree@vger.kernel.org \
--cc=imx@lists.linux.dev \
--cc=robh@kernel.org \
--cc=sashiko-reviews@lists.linux.dev \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.