From: sashiko-bot@kernel.org
To: Frank.Li@oss.nxp.com
Cc: devicetree@vger.kernel.org, imx@lists.linux.dev, robh@kernel.org,
conor+dt@kernel.org, Frank.Li@kernel.org
Subject: Re: [PATCH v2 03/13] ARM: dts: imx6dl-b155v2: add touchscreen size properties
Date: Mon, 19 Oct 2026 18:35:56 +0000 [thread overview]
Message-ID: <sashiko-outbox-178098@kernel.org> (raw)
In-Reply-To: <20261019-arm_dts_cleanup2-v2-3-dcdcbe6389c1@nxp.com>
Thank you for your contribution! Sashiko AI review found 1 potential issue(s) to consider:
- [Medium] ARM: dts: imx6dl-b155v2: commit message contradicts 16384 touchscreen size
--
commit 9dc060e080fedd6ab87ca8276cfb3bb59a468536
Author: Frank Li <Frank.Li@nxp.com>
ARM: dts: imx6dl-b155v2: add touchscreen size properties
This commit adds touchscreen-size-x and touchscreen-size-y properties to the
touchscreen@2a node in arch/arm/boot/dts/nxp/imx/imx6dl-b155v2.dts to satisfy
the eeti,exc3000 binding schema.
> ARM: dts: imx6dl-b155v2: add touchscreen size properties
>
> The eeti,exc3000 schema requires touchscreen-size-x and touchscreen-size-y
> properties. Add them for the EXC80H84 touchscreen on the B155v2 board,
> matching the 1366x768 resolution of the AUO G156XTN01 panel.
>
> Fix below CHECK_DTBS warnings:
> arch/arm/boot/dts/nxp/imx/imx6dl-b155v2.dtb: touchscreen@2a (eeti,exc80h84): 'touchscreen-size-x' is a required property
> from schema $id: http://devicetree.org/schemas/input/touchscreen/eeti,exc3000.yaml
>
> Signed-off-by: Frank Li <Frank.Li@nxp.com>
>
> diff --git a/arch/arm/boot/dts/nxp/imx/imx6dl-b155v2.dts b/arch/arm/boot/dts/nxp/imx/imx6dl-b155v2.dts
> index 7edc788bcb8f3..dd7b892cf0722 100644
> --- a/arch/arm/boot/dts/nxp/imx/imx6dl-b155v2.dts
> +++ b/arch/arm/boot/dts/nxp/imx/imx6dl-b155v2.dts
> @@ -25,6 +25,8 @@ touchscreen@2a {
> pinctrl-0 = <&pinctrl_q7_gpio0>;
> interrupt-parent = <&gpio5>;
> interrupts = <2 IRQ_TYPE_LEVEL_LOW>;
> + touchscreen-size-x = <16384>;
> + touchscreen-size-y = <16384>;
> touchscreen-inverted-x;
> touchscreen-inverted-y;
> reset-gpios = <&tca6424a 21 GPIO_ACTIVE_HIGH>;
[Severity: Medium]
The commit message states that these properties are added "matching the
1366x768 resolution of the AUO G156XTN01 panel", but the touchscreen@2a node in
arch/arm/boot/dts/nxp/imx/imx6dl-b155v2.dts sets both touchscreen-size-x and
touchscreen-size-y to 16384.
In drivers/input/touchscreen/exc3000.c, exc3000_info defines the native
coordinate range for EETI_EXC80H84 as 16K:
drivers/input/touchscreen/exc3000.c:exc3000_info[] = {
...
[EETI_EXC80H84] = {
.name = "EETI EXC80H84 Touch Screen",
.max_xy = SZ_16K - 1,
},
...
};
Should the commit message be updated to reflect that the properties are set to
16384 to match the EXC80H84 controller's 16K coordinate range rather than the
1366x768 panel resolution?
--
Sashiko AI review · https://sashiko.dev/#/patchset/20261019-arm_dts_cleanup2-v2-0-dcdcbe6389c1@nxp.com?part=3
next prev parent reply other threads:[~2026-10-19 18:35 UTC|newest]
Thread overview: 15+ messages / expand[flat|nested] mbox.gz Atom feed top
2026-10-19 18:26 [PATCH v2 00/13] ARM: dts: imx: cleanup some CHECK_DTBS warnings Frank.Li
2026-10-19 18:26 ` [PATCH v2 01/13] ARM: dts: imx6q-dms-ba16: remove undocumented property fsl,receive-dpll-mode Frank.Li
2026-10-19 18:26 ` [PATCH v2 02/13] ARM: dts: imx50-amazon-yoshi: remove undocument property min-frequency Frank.Li
2026-10-19 18:26 ` [PATCH v2 03/13] ARM: dts: imx6dl-b155v2: add touchscreen size properties Frank.Li
2026-10-19 18:35 ` sashiko-bot [this message]
2026-10-19 18:26 ` [PATCH v2 04/13] ARM: dts: imx6q-gw5400-a: fix SPI NOR flash vendor prefix Frank.Li
2026-10-19 18:26 ` [PATCH v2 05/13] ARM: dts: imx6dl-prtmvt: remove redundant panel compatible fallback Frank.Li
2026-10-19 18:26 ` [PATCH v2 06/13] ARM: dts: imx53-smd: change compatible string to dlg,da9053-aa Frank.Li
2026-10-19 18:26 ` [PATCH v2 07/13] ARM: dts: imx6qdl-savageboard: remove undocument avic,tm097tdh02 Frank.Li
2026-10-19 18:26 ` [PATCH v2 08/13] ARM: dts: imx6ul-tx6ul: remove front compatible string karo,imx6ul-tx6ul-sgtl5000 Frank.Li
2026-10-19 18:26 ` [PATCH v2 09/13] ARM: dts: imx6qdl-tx6-mb7: remove redundant pixelclk-active for simple panel Frank.Li
2026-10-19 18:26 ` [PATCH v2 10/13] ARM: dts: imx6q-h100: rename port to port@0 for mipi_csi Frank.Li
2026-10-19 18:26 ` [PATCH v2 11/13] ARM: dts: imx6qdl-sabrelite: fix typo vync-active Frank.Li
2026-10-19 18:26 ` [PATCH v2 12/13] ARM: dts: imx6q-novena: use interrupts replace irq-gpio Frank.Li
2026-10-19 18:26 ` [PATCH v2 13/13] ARM: dts: imx6sx-sdb-mqs: remove pinctrl-0 and pinctrl-names Frank.Li
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=sashiko-outbox-178098@kernel.org \
--to=sashiko-bot@kernel.org \
--cc=Frank.Li@kernel.org \
--cc=Frank.Li@oss.nxp.com \
--cc=conor+dt@kernel.org \
--cc=devicetree@vger.kernel.org \
--cc=imx@lists.linux.dev \
--cc=robh@kernel.org \
--cc=sashiko-reviews@lists.linux.dev \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.