Re: [PATCH v5 01/10] dmaengine: dw: Fix XFER bit set, but channel not idle error

[sashiko-bot@kernel.org]

> From: Serge Semin <fancer.lancer@gmail.com>
> 
> If a client driver gets to use the DW DMAC engine device tougher
> than usual, with occasional DMA-transfers termination and restart, then
> the next error can be randomly spotted in the system log:
> 
> > dma dma0chan0: BUG: XFER bit set, but channel not idle!
> 
> For instance that happens in case of the 8250 UART port driver handling
> the looped back high-speed traffic (in my case > 1.5Mbaud) by means of the
> DMA-engine interface.
> 
> The error happens due to the two-staged nature of the DW DMAC IRQs
> handling procedure and due to the critical section break in the meantime.
> In particular in case if the DMA-transfer is terminated and restarted:
> [ ... ]
> Cc: stable@vger.kernel.org
> Signed-off-by: Serge Semin <fancer.lancer@gmail.com>
> [james: require a locked XFER event and handle an empty active list]
> Reviewed-by: Frank Li <Frank.Li@nxp.com>
> Signed-off-by: James Hilliard <james.hilliard1@gmail.com>

Sashiko has reviewed this patch and found no issues.

-- 
Sashiko AI review · https://sashiko.dev/#/patchset/20261102-submit-dw-dma-synchronize-v1-v5-0-d3207758fbf9@gmail.com?part=1