From: sashiko-bot@kernel.org
To: "Michael Reeves" <michael.reeves077@gmail.com>
Cc: devicetree@vger.kernel.org, linux-input@vger.kernel.org,
robh@kernel.org, conor+dt@kernel.org, dmitry.torokhov@gmail.com
Subject: Re: [PATCH v5 5/8] HID: apple: Add support for DockChannel HID keyboards
Date: Sun, 08 Nov 2026 07:38:42 +0000 [thread overview]
Message-ID: <sashiko-outbox-203630@kernel.org> (raw)
In-Reply-To: <20261108-b4-apple-mtp-keyboard-v5-5-e2c97b82669a@gmail.com>
Thank you for your contribution! Sashiko AI review found 1 potential
issue to consider:
- [Low] HID: apple: redundant apple_match() duplicates
hid_check_device_match()
--
commit 9add0dddf8a7b243671bc6303c493d3097cdd737
Author: Michael Reeves <michael.reeves077@gmail.com>
HID: apple: Add support for DockChannel HID keyboards
This commit adds HID_GROUP_APPLE_DOCKCHANNEL and matches host-bus Apple
DockChannel keyboards in hid-apple using the modern Magic Keyboard
function-key translation table.
> diff --git a/drivers/hid/hid-apple.c b/drivers/hid/hid-apple.c
> index 5b32fb8c77f3f..d0059a3c0ac7e 100644
> --- a/drivers/hid/hid-apple.c
> +++ b/drivers/hid/hid-apple.c
[ ... ]
> @@ -1025,6 +1035,18 @@ static void apple_remove(struct hid_device *hdev)
> hid_hw_stop(hdev);
> }
>
> +static bool apple_match(struct hid_device *hdev, bool ignore_special_driver)
> +{
> + if (ignore_special_driver ||
> + (hdev->quirks & HID_QUIRK_IGNORE_SPECIAL_DRIVER))
> + return false;
> +
> + if (hdev->group == HID_GROUP_APPLE_DOCKCHANNEL)
> + return apple_is_dockchannel_keyboard(hdev);
> +
> + return true;
> +}
> +
> static const struct hid_device_id apple_devices[] = {
> { HID_USB_DEVICE(USB_VENDOR_ID_APPLE, USB_DEVICE_ID_APPLE_MIGHTYMOUSE),
> .driver_data = APPLE_MIGHTYMOUSE | APPLE_INVERT_HWHEEL },
> @@ -1250,6 +1272,9 @@ static const struct hid_device_id apple_devices[] = {
> .driver_data = APPLE_HAS_FN | APPLE_ISO_TILDE_QUIRK },
> { HID_USB_DEVICE(USB_VENDOR_ID_APPLE, USB_DEVICE_ID_APPLE_TOUCHBAR_BACKLIGHT),
> .driver_data = APPLE_MAGIC_BACKLIGHT },
> + { HID_DEVICE(BUS_HOST, HID_GROUP_APPLE_DOCKCHANNEL,
> + HID_ANY_ID, HID_ANY_ID),
> + .driver_data = APPLE_HAS_FN | APPLE_ISO_TILDE_QUIRK },
>
> { }
> };
> @@ -1258,6 +1283,7 @@ MODULE_DEVICE_TABLE(hid, apple_devices);
> static struct hid_driver apple_driver = {
> .name = "apple",
> .id_table = apple_devices,
> + .match = apple_match,
[Severity: Low]
Is apple_match() needed here?
hid_check_device_match() first matches against apple_devices[], where the
HID_DEVICE(BUS_HOST, HID_GROUP_APPLE_DOCKCHANNEL, ...) entry already
requires hdev->bus == BUS_HOST and hdev->group ==
HID_GROUP_APPLE_DOCKCHANNEL. When hdrv->match is NULL,
hid_check_device_match() also enforces !hid_ignore_special_drivers and
!(hdev->quirks & HID_QUIRK_IGNORE_SPECIAL_DRIVER) itself:
drivers/hid/hid-core.c:hid_check_device_match() {
*id = hid_match_device(hdev, hdrv);
if (!*id)
return false;
if (hdrv->match)
return hdrv->match(hdev, hid_ignore_special_drivers);
/*
* hid-generic implements .match(), so we must be dealing with a
* different HID driver here, and can simply check if
* hid_ignore_special_drivers or HID_QUIRK_IGNORE_SPECIAL_DRIVER
* are set or not.
*/
return !hid_ignore_special_drivers && !(hdev->quirks & HID_QUIRK_IGNORE_SPECIAL_DRIVER);
}
Setting .match on apple_driver duplicates those checks and causes
__hid_bus_driver_added() to run __hid_bus_reprobe_drivers() across all HID
devices whenever any HID driver is registered.
--
Sashiko AI review · https://sashiko.dev/#/patchset/20261108-b4-apple-mtp-keyboard-v5-0-e2c97b82669a@gmail.com?part=5
next prev parent reply other threads:[~2026-11-08 7:38 UTC|newest]
Thread overview: 27+ messages / expand[flat|nested] mbox.gz Atom feed top
2026-11-08 7:25 [PATCH v5 0/8] Add support for Apple Silicon DockChannel internal keyboards Michael Reeves
2026-11-08 7:25 ` Michael Reeves via B4 Relay
2026-11-08 7:25 ` [PATCH v5 1/8] dt-bindings: mailbox: apple: Add DockChannel mailbox Michael Reeves
2026-11-08 7:25 ` Michael Reeves via B4 Relay
2026-11-08 7:25 ` [PATCH v5 2/8] dt-bindings: input: apple: Add DockChannel HID transport Michael Reeves
2026-11-08 7:25 ` Michael Reeves via B4 Relay
2026-11-10 9:20 ` Krzysztof Kozlowski
2026-11-10 11:26 ` Michael Reeves
2026-11-10 11:30 ` Krzysztof Kozlowski
2026-11-11 1:57 ` Michael Reeves
2026-11-08 7:25 ` [PATCH v5 3/8] mailbox: apple: Add DockChannel FIFO controller Michael Reeves
2026-11-08 7:25 ` Michael Reeves via B4 Relay
2026-11-08 7:45 ` sashiko-bot
2026-11-08 7:25 ` [PATCH v5 4/8] soc: apple: rtkit: Add tracekit endpoint Michael Reeves
2026-11-08 7:25 ` Michael Reeves via B4 Relay
2026-11-08 7:25 ` [PATCH v5 5/8] HID: apple: Add support for DockChannel HID keyboards Michael Reeves
2026-11-08 7:25 ` Michael Reeves via B4 Relay
2026-11-08 7:38 ` sashiko-bot [this message]
2026-11-08 7:25 ` [PATCH v5 6/8] HID: apple: Add DockChannel HID transport driver Michael Reeves
2026-11-08 7:25 ` Michael Reeves via B4 Relay
2026-11-08 7:48 ` sashiko-bot
2026-11-08 7:25 ` [PATCH v5 7/8] arm64: dts: apple: Add MTP DockChannel HID nodes Michael Reeves
2026-11-08 7:25 ` Michael Reeves via B4 Relay
2026-11-08 7:40 ` sashiko-bot
2026-11-08 7:48 ` Michael Reeves
2026-11-08 7:25 ` [PATCH v5 8/8] arm64: dts: apple: Enable DockChannel HID on M2 and M3 laptops Michael Reeves
2026-11-08 7:25 ` Michael Reeves via B4 Relay
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=sashiko-outbox-203630@kernel.org \
--to=sashiko-bot@kernel.org \
--cc=conor+dt@kernel.org \
--cc=devicetree@vger.kernel.org \
--cc=dmitry.torokhov@gmail.com \
--cc=linux-input@vger.kernel.org \
--cc=michael.reeves077@gmail.com \
--cc=robh@kernel.org \
--cc=sashiko-reviews@lists.linux.dev \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.