All of lore.kernel.org
 help / color / mirror / Atom feed
From: sashiko-bot@kernel.org
To: "Paolo Pisati" <p.pisati@gmail.com>
Cc: linux-ide@vger.kernel.org, mfd@lists.linux.dev,
	dlemoal@kernel.org, cassel@kernel.org, lee@kernel.org
Subject: Re: [PATCH v1 2/7] ata: pata_cswarp: bind to the Warp mfd cell instead of the Zorro device
Date: Wed, 11 Nov 2026 17:12:12 +0000	[thread overview]
Message-ID: <sashiko-outbox-209383@kernel.org> (raw)
In-Reply-To: <20261111163735.227286-3-p.pisati@gmail.com>

Thank you for your contribution! Sashiko AI review found 1 potential
issue to consider:
- [Low] ata: pata_cswarp: duplicate ata_platform_remove_one() and
  module_platform_driver()
--

commit 0358845c5d4b9568f67a2b55aedc3acc1ebbdef0
Author: Paolo Pisati <p.pisati@gmail.com>

ata: pata_cswarp: bind to the Warp mfd cell instead of the Zorro device

This commit converts pata_cswarp from a Zorro driver into a platform driver
that binds to the "warp-pata" MFD cell provided by warp-mfd.

> diff --git a/drivers/ata/pata_cswarp.c b/drivers/ata/pata_cswarp.c
> index 58fe6d0012dc5..41b4c93052cfd 100644
> --- a/drivers/ata/pata_cswarp.c
> +++ b/drivers/ata/pata_cswarp.c

[ ... ]

> @@ -145,34 +135,29 @@ static int pata_cswarp_probe(struct zorro_dev *z,
>  			  IRQF_SHARED, &pata_cswarp_sht);
>  }
>  
> -static void pata_cswarp_remove(struct zorro_dev *z)
> +static void pata_cswarp_remove(struct platform_device *pdev)
>  {
> -	struct ata_host *host = dev_get_drvdata(&z->dev);
> +	struct ata_host *host = dev_get_drvdata(&pdev->dev);
>  
>  	ata_host_detach(host);
>  }
>  
> -static const struct zorro_device_id pata_cswarp_zorro_tbl[] = {
> -	{ .id = ZORRO_PROD_CSLAB_WARP_1260 },
> -	{ }
> -};
> -MODULE_DEVICE_TABLE(zorro, pata_cswarp_zorro_tbl);
> -
> -static struct zorro_driver pata_cswarp_driver = {
> -	.name           = "pata_cswarp",
> -	.id_table       = pata_cswarp_zorro_tbl,
> +static struct platform_driver pata_cswarp_driver = {
> +	.driver = {
> +		.name	= "warp-pata",
> +	},
>  	.probe          = pata_cswarp_probe,
>  	.remove         = pata_cswarp_remove,
>  };
>  
>  static int __init pata_cswarp_init(void)
>  {
> -	return zorro_register_driver(&pata_cswarp_driver);
> +	return platform_driver_register(&pata_cswarp_driver);
>  }
>  
>  static void __exit pata_cswarp_unregister(void)
>  {
> -	zorro_unregister_driver(&pata_cswarp_driver);
> +	platform_driver_unregister(&pata_cswarp_driver);
>  }

[Severity: Low]
Now that pata_cswarp is a platform_driver, could pata_cswarp_remove() be
replaced with libata's ata_platform_remove_one(), and pata_cswarp_init() /
pata_cswarp_unregister() with module_platform_driver(pata_cswarp_driver)?

-- 
Sashiko AI review · https://sashiko.dev/#/patchset/20261111163735.227286-1-p.pisati@gmail.com?part=2

  reply	other threads:[~2026-11-11 17:12 UTC|newest]

Thread overview: 13+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2026-11-11 16:37 [PATCH v1 0/7] zorro: add a CS-Lab Warp 1260 MFD Paolo Pisati
2026-11-11 16:37 ` [PATCH v1 1/7] zorro: warp mfd: add the CS-Lab Warp multifunction parent Paolo Pisati
2026-11-11 17:03   ` sashiko-bot
2026-11-11 18:04     ` Lee Jones
2026-11-12 15:21       ` Paolo Pisati
2026-11-11 16:37 ` [PATCH v1 2/7] ata: pata_cswarp: bind to the Warp mfd cell instead of the Zorro device Paolo Pisati
2026-11-11 17:12   ` sashiko-bot [this message]
2026-11-11 16:37 ` [PATCH v1 3/7] m68k: defconfig: enable WARP_MFD Paolo Pisati
2026-11-11 16:37 ` [PATCH v1 4/7] zorro: warp mfd: add the dual-port RAM command channel and expose the board identity Paolo Pisati
2026-11-11 17:23   ` sashiko-bot
2026-11-11 16:37 ` [PATCH v1 5/7] zorro: warp mfd: expose the voltage and temperature sensors Paolo Pisati
2026-11-11 16:37 ` [PATCH v1 6/7] zorro: warp mfd: expose the fan duty cycle Paolo Pisati
2026-11-11 16:37 ` [PATCH v1 7/7] zorro: warp mfd: expose the Kickstart slot selection Paolo Pisati

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=sashiko-outbox-209383@kernel.org \
    --to=sashiko-bot@kernel.org \
    --cc=cassel@kernel.org \
    --cc=dlemoal@kernel.org \
    --cc=lee@kernel.org \
    --cc=linux-ide@vger.kernel.org \
    --cc=mfd@lists.linux.dev \
    --cc=p.pisati@gmail.com \
    --cc=sashiko-reviews@lists.linux.dev \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.