From: sashiko-bot@kernel.org
To: "Han Gao" <gaohan@iscas.ac.cn>
Cc: linux-rtc@vger.kernel.org,
"Alexandre Belloni" <alexandre.belloni@bootlin.com>
Subject: Re: [PATCH 12/19] dt-bindings: pinctrl: add the Allwinner V861 pin controllers
Date: Fri, 13 Nov 2026 22:41:57 +0000 [thread overview]
Message-ID: <sashiko-outbox-213836@kernel.org> (raw)
In-Reply-To: <20261114-v861-v1-12-eb71ec3ee523@iscas.ac.cn>
> From: Han Gao <gaohan@iscas.ac.cn>
>
> The V861 main and always-on pin controllers follow the A523 binding.
> The always-on one has a single interrupt bank, so also allow a single
> debounce value.
>
> Signed-off-by: Han Gao <gaohan@iscas.ac.cn>
Sashiko has reviewed this patch and found no issues.
--
Sashiko AI review · https://sashiko.dev/#/patchset/20261114-v861-v1-0-eb71ec3ee523@iscas.ac.cn?part=12
next prev parent reply other threads:[~2026-11-13 22:41 UTC|newest]
Thread overview: 76+ messages / expand[flat|nested] mbox.gz Atom feed top
2026-11-13 22:33 [PATCH 00/19] riscv: add initial support for the Allwinner V861 and Avaota F2 Han Gao via B4 Relay
2026-11-13 22:33 ` Han Gao via B4 Relay
2026-11-13 22:33 ` Han Gao
2026-11-13 22:33 ` [PATCH 01/19] riscv: sunxi: describe the wider Allwinner SoC family Han Gao via B4 Relay
2026-11-13 22:33 ` Han Gao via B4 Relay
2026-11-13 22:33 ` Han Gao
2026-11-13 22:36 ` sashiko-bot
2026-11-13 22:33 ` [PATCH 02/19] dt-bindings: riscv: cpus: add the XuanTie C907 Han Gao via B4 Relay
2026-11-13 22:33 ` Han Gao via B4 Relay
2026-11-13 22:33 ` Han Gao
2026-11-13 22:39 ` sashiko-bot
2026-11-13 22:33 ` [PATCH 03/19] dt-bindings: interrupt-controller: add the Allwinner V861 PLIC Han Gao via B4 Relay
2026-11-13 22:33 ` Han Gao via B4 Relay
2026-11-13 22:33 ` Han Gao
2026-11-13 22:37 ` sashiko-bot
2026-11-13 22:33 ` [PATCH 04/19] dt-bindings: timer: add the Allwinner V861 CLINT Han Gao via B4 Relay
2026-11-13 22:33 ` Han Gao via B4 Relay
2026-11-13 22:33 ` Han Gao
2026-11-13 22:36 ` sashiko-bot
2026-11-13 22:33 ` [PATCH 05/19] dt-bindings: clock: sunxi-ng: document the Allwinner V861 CCUs Han Gao via B4 Relay
2026-11-13 22:33 ` Han Gao via B4 Relay
2026-11-13 22:33 ` Han Gao
2026-11-13 22:39 ` sashiko-bot
2026-11-13 22:33 ` [PATCH 06/19] clk: sunxi-ng: add support for the Allwinner V861 CCU Han Gao via B4 Relay
2026-11-13 22:33 ` Han Gao via B4 Relay
2026-11-13 22:33 ` Han Gao
2026-11-13 22:33 ` [PATCH 07/19] clk: sunxi-ng: add support for the Allwinner V861 PRCM CCU Han Gao via B4 Relay
2026-11-13 22:33 ` Han Gao via B4 Relay
2026-11-13 22:33 ` Han Gao
2026-11-13 22:36 ` sashiko-bot
2026-11-13 22:33 ` [PATCH 08/19] dt-bindings: rtc: sun6i: add the Allwinner V861 RTC Han Gao via B4 Relay
2026-11-13 22:33 ` Han Gao via B4 Relay
2026-11-13 22:33 ` Han Gao
2026-11-13 22:37 ` sashiko-bot
2026-11-13 22:33 ` [PATCH 09/19] clk: sunxi-ng: sun6i-rtc: allow variants without a 32k fanout mux Han Gao via B4 Relay
2026-11-13 22:33 ` Han Gao via B4 Relay
2026-11-13 22:33 ` Han Gao
2026-11-13 22:36 ` sashiko-bot
2026-11-13 22:33 ` [PATCH 10/19] clk: sunxi-ng: sun6i-rtc: allow another 24 MHz to 32k divider ratio Han Gao via B4 Relay
2026-11-13 22:33 ` Han Gao via B4 Relay
2026-11-13 22:33 ` Han Gao
2026-11-13 22:36 ` sashiko-bot
2026-11-13 22:33 ` [PATCH 11/19] clk: sunxi-ng: sun6i-rtc: add Allwinner V861 support Han Gao via B4 Relay
2026-11-13 22:33 ` Han Gao via B4 Relay
2026-11-13 22:33 ` Han Gao
2026-11-13 22:37 ` sashiko-bot
2026-11-13 22:33 ` [PATCH 12/19] dt-bindings: pinctrl: add the Allwinner V861 pin controllers Han Gao via B4 Relay
2026-11-13 22:33 ` Han Gao via B4 Relay
2026-11-13 22:33 ` Han Gao
2026-11-13 22:41 ` sashiko-bot [this message]
2026-11-13 22:33 ` [PATCH 13/19] pinctrl: sunxi: allow a per-controller IRQ register base Han Gao via B4 Relay
2026-11-13 22:33 ` Han Gao via B4 Relay
2026-11-13 22:33 ` Han Gao
2026-11-13 22:39 ` sashiko-bot
2026-11-13 22:33 ` [PATCH 14/19] pinctrl: sunxi: add support for the Allwinner V861 PIO Han Gao via B4 Relay
2026-11-13 22:33 ` Han Gao via B4 Relay
2026-11-13 22:33 ` Han Gao
2026-11-13 22:33 ` [PATCH 15/19] pinctrl: sunxi: add support for the Allwinner V861 R-PIO Han Gao via B4 Relay
2026-11-13 22:33 ` Han Gao via B4 Relay
2026-11-13 22:33 ` Han Gao
2026-11-13 22:39 ` sashiko-bot
2026-11-13 22:33 ` [PATCH 16/19] riscv: dts: allwinner: add the Allwinner V861 SoC Han Gao via B4 Relay
2026-11-13 22:33 ` Han Gao via B4 Relay
2026-11-13 22:33 ` Han Gao
2026-11-13 22:41 ` sashiko-bot
2026-11-13 22:33 ` [PATCH 17/19] dt-bindings: riscv: sunxi: add the YuzukiHD Avaota F2 Han Gao via B4 Relay
2026-11-13 22:33 ` Han Gao via B4 Relay
2026-11-13 22:33 ` Han Gao
2026-11-13 22:37 ` sashiko-bot
2026-11-13 22:33 ` [PATCH 18/19] riscv: dts: allwinner: add the YuzukiHD Avaota F2 board Han Gao via B4 Relay
2026-11-13 22:33 ` Han Gao via B4 Relay
2026-11-13 22:33 ` Han Gao
2026-11-13 22:39 ` sashiko-bot
2026-11-13 22:33 ` [PATCH 19/19] MAINTAINERS: add an entry for the Allwinner V861 SoC Han Gao via B4 Relay
2026-11-13 22:33 ` Han Gao via B4 Relay
2026-11-13 22:33 ` Han Gao
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=sashiko-outbox-213836@kernel.org \
--to=sashiko-bot@kernel.org \
--cc=alexandre.belloni@bootlin.com \
--cc=gaohan@iscas.ac.cn \
--cc=linux-rtc@vger.kernel.org \
--cc=sashiko-reviews@lists.linux.dev \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.