From: sashiko-bot@kernel.org
To: "Alexei Starovoitov" <alexei.starovoitov@gmail.com>, bpf@vger.kernel.org
Subject: Re: [PATCH bpf-next 02/49] bpf: Make stack liveness faster
Date: Fri, 20 Nov 2026 08:01:42 +0000 [thread overview]
Message-ID: <sashiko-outbox-224675@kernel.org> (raw)
In-Reply-To: <20261120074430.2704488-3-alexei.starovoitov@gmail.com>
Thank you for your contribution! Sashiko AI review found 1 potential
issue to consider:
- [High] bpf: build failure in arg_track_join_all() due to undeclared
identifiers
--
commit cea430c3bc4cf95a99331bfb62eb0f7db9d5efe1
Author: Alexei Starovoitov <ast@kernel.org>
bpf: Make stack liveness faster
This commit speeds up BPF stack liveness analysis by visiting only
instructions whose input changed, using memcpy() and memcmp() for slot
joins, and converting half-slots to slots by words.
> diff --git a/kernel/bpf/liveness.c b/kernel/bpf/liveness.c
> index cfa416f762097..bd186d3c201a3 100644
> --- a/kernel/bpf/liveness.c
> +++ b/kernel/bpf/liveness.c
[ ... ]
> @@ -1103,9 +1111,18 @@ static bool arg_track_join_all(struct bpf_verifier_env *env, int idx, int target
> bool changed = false;
> int r;
>
> + if (!arg_is_visited(&in[BPF_REG_FP])) {
> + memcpy(in, out, MAX_AT_TRACK_REGS * sizeof(*in));
> + memcpy(stack_in, stack_out, nslots * sizeof(*stack_in));
> + return true;
> + }
> for (r = 0; r < MAX_AT_TRACK_REGS; r++)
> changed |= arg_track_join(env, idx, target, r, &in[r], out[r]);
> - for (r = 0; r < nslots; r++)
> + same = !memcmp(stack_in, stack_out, nslots * sizeof(*stack_in));
> + /* a change pays for the next visit of @target too */
> + bpf_add_cost(env, MAX_AT_TRACK_REGS + nslots,
> + same && !changed ? BPF_COST_COPY : BPF_COST_XREG);
> + for (r = 0; r < nslots && !same; r++)
> changed |= arg_track_join(env, idx, target, -r - 1, &stack_in[r], stack_out[r]);
> return changed;
> }
[Severity: High]
Does arg_track_join_all() fail to build here because same, bpf_add_cost(),
BPF_COST_COPY, and BPF_COST_XREG are undeclared? These identifiers are
only declared and defined later in the series in commit "bpf: Limit the
cost and the memory of a load", breaking compilation and git bisection at
this commit.
--
Sashiko AI review · https://sashiko.dev/#/patchset/20261120074430.2704488-1-alexei.starovoitov@gmail.com?part=2
next prev parent reply other threads:[~2026-11-20 8:01 UTC|newest]
Thread overview: 83+ messages / expand[flat|nested] mbox.gz Atom feed top
2026-11-20 7:41 [PATCH bpf-next 00/49] bpf: Verify in passes, with equations in the state Alexei Starovoitov
2026-11-20 7:41 ` [PATCH bpf-next 01/49] bpf: Look for bpf_clone_redirect() once in check_recursion() Alexei Starovoitov
2026-11-20 7:41 ` [PATCH bpf-next 02/49] bpf: Make stack liveness faster Alexei Starovoitov
2026-11-20 8:01 ` sashiko-bot [this message]
2026-11-20 8:24 ` bot+bpf-ci
2026-11-20 7:41 ` [PATCH bpf-next 03/49] bpf: Delete the old main pass of the verifier Alexei Starovoitov
2026-11-20 8:25 ` bot+bpf-ci
2026-11-20 7:41 ` [PATCH bpf-next 04/49] bpf: Delete scalar evolution Alexei Starovoitov
2026-11-20 8:03 ` sashiko-bot
2026-11-20 8:25 ` bot+bpf-ci
2026-11-20 17:50 ` Alexei Starovoitov
2026-11-20 7:41 ` [PATCH bpf-next 05/49] bpf: Limit the cost and the memory of a load Alexei Starovoitov
2026-11-20 8:00 ` sashiko-bot
2026-11-20 17:50 ` Alexei Starovoitov
2026-11-20 8:25 ` bot+bpf-ci
2026-11-20 17:51 ` Alexei Starovoitov
2026-11-20 7:41 ` [PATCH bpf-next 06/49] bpf: Record what each insn reads and writes Alexei Starovoitov
2026-11-20 8:25 ` bot+bpf-ci
2026-11-20 7:41 ` [PATCH bpf-next 07/49] bpf: Name an id after the xreg that has it Alexei Starovoitov
2026-11-20 8:25 ` bot+bpf-ci
2026-11-20 7:41 ` [PATCH bpf-next 08/49] bpf: Do not fail a check because a state has fewer values Alexei Starovoitov
2026-11-20 8:25 ` bot+bpf-ci
2026-11-20 8:39 ` sashiko-bot
2026-11-20 7:41 ` [PATCH bpf-next 09/49] bpf: Check fixups in the main pass and keep a snapshot of them Alexei Starovoitov
2026-11-20 8:25 ` bot+bpf-ci
2026-11-20 7:41 ` [PATCH bpf-next 10/49] bpf: Reject a program with a call that needs two rewrites Alexei Starovoitov
2026-11-20 7:41 ` [PATCH bpf-next 11/49] bpf: Put a barrier where no mask fits Alexei Starovoitov
2026-11-20 8:25 ` bot+bpf-ci
2026-11-20 7:41 ` [PATCH bpf-next 12/49] bpf: Keep more of what is known about a number Alexei Starovoitov
2026-11-20 8:18 ` sashiko-bot
2026-11-20 8:25 ` bot+bpf-ci
2026-11-20 7:41 ` [PATCH bpf-next 13/49] bpf: Remember how many bytes of a packet are checked Alexei Starovoitov
2026-11-20 8:25 ` bot+bpf-ci
2026-11-20 7:41 ` [PATCH bpf-next 14/49] bpf: Mark a state that no run of the program has Alexei Starovoitov
2026-11-20 8:24 ` bot+bpf-ci
2026-11-20 7:41 ` [PATCH bpf-next 15/49] bpf: Peel the first trips of a loop and join the other trips Alexei Starovoitov
2026-11-20 8:25 ` bot+bpf-ci
2026-11-20 7:41 ` [PATCH bpf-next 16/49] bpf: Add equations and their arithmetic Alexei Starovoitov
2026-11-20 8:24 ` bot+bpf-ci
2026-11-20 7:41 ` [PATCH bpf-next 17/49] bpf: Keep a table of equations in each state Alexei Starovoitov
2026-11-20 8:17 ` sashiko-bot
2026-11-20 8:25 ` bot+bpf-ci
2026-11-20 7:41 ` [PATCH bpf-next 18/49] bpf: Refine all related numbers after a jump Alexei Starovoitov
2026-11-20 7:41 ` [PATCH bpf-next 19/49] bpf: Make equations from ALU, spill, fill and call insns Alexei Starovoitov
2026-11-20 8:25 ` bot+bpf-ci
2026-11-20 8:26 ` sashiko-bot
2026-11-20 7:41 ` [PATCH bpf-next 20/49] bpf: Delete the equations that say nothing Alexei Starovoitov
2026-11-20 8:25 ` bot+bpf-ci
2026-11-20 7:41 ` [PATCH bpf-next 21/49] bpf: Compare states by join_key, then by value Alexei Starovoitov
2026-11-20 8:22 ` sashiko-bot
2026-11-20 17:52 ` Alexei Starovoitov
2026-11-20 7:41 ` [PATCH bpf-next 22/49] bpf: Continue a pass after an unproven insn Alexei Starovoitov
2026-11-20 7:41 ` [PATCH bpf-next 23/49] bpf: Find the xregs that an unproven insn depends on Alexei Starovoitov
2026-11-20 7:41 ` [PATCH bpf-next 24/49] bpf: Keep two states apart if data and control deps differ Alexei Starovoitov
2026-11-20 7:41 ` [PATCH bpf-next 25/49] bpf: Join any two states that have the same join_key Alexei Starovoitov
2026-11-20 8:25 ` sashiko-bot
2026-11-20 7:41 ` [PATCH bpf-next 26/49] bpf: Check the equations when a state is pruned or joined Alexei Starovoitov
2026-11-20 7:41 ` [PATCH bpf-next 27/49] bpf: Guess the equations of a join Alexei Starovoitov
2026-11-20 7:42 ` [PATCH bpf-next 28/49] bpf: Prune or join each state that arrives Alexei Starovoitov
2026-11-20 7:42 ` [PATCH bpf-next 29/49] bpf: Order the pending states and free the states that are done Alexei Starovoitov
2026-11-20 7:42 ` [PATCH bpf-next 30/49] bpf: Get the trip count from the trip index Alexei Starovoitov
2026-11-20 8:22 ` sashiko-bot
2026-11-20 7:42 ` [PATCH bpf-next 31/49] bpf: Give a loop a checked trip count or may_goto Alexei Starovoitov
2026-11-20 7:42 ` [PATCH bpf-next 32/49] bpf: Use the equations in the join rule Alexei Starovoitov
2026-11-20 7:42 ` [PATCH bpf-next 33/49] bpf: Verify a static function once for each instance Alexei Starovoitov
2026-11-20 8:33 ` sashiko-bot
2026-11-20 7:42 ` [PATCH bpf-next 34/49] bpf: Partition the states after an error Alexei Starovoitov
2026-11-20 7:42 ` [PATCH bpf-next 35/49] bpf: Reproduce an error on one path, with no joins Alexei Starovoitov
2026-11-20 7:42 ` [PATCH bpf-next 36/49] bpf: Do not let a join raise what a program requires Alexei Starovoitov
2026-11-20 7:42 ` [PATCH bpf-next 37/49] bpf: Verify in passes Alexei Starovoitov
2026-11-20 7:42 ` [PATCH bpf-next 38/49] bpf: Make a returned pointer to the stack unreadable Alexei Starovoitov
2026-11-20 7:42 ` [PATCH bpf-next 39/49] bpf: Keep two states apart if a live xreg has two types Alexei Starovoitov
2026-11-20 7:42 ` [PATCH bpf-next 40/49] bpf: Check the body of a counted loop once Alexei Starovoitov
2026-11-20 7:42 ` [PATCH bpf-next 41/49] bpf: Refine the copies of a number that AND or OR splits Alexei Starovoitov
2026-11-20 7:42 ` [PATCH bpf-next 42/49] bpf: Allow a range of offsets for a constant string Alexei Starovoitov
2026-11-20 7:42 ` [PATCH bpf-next 43/49] bpf: Keep spilled pointers at a range of stack offsets Alexei Starovoitov
2026-11-20 7:42 ` [PATCH bpf-next 44/49] selftests/bpf: Adjust tests to the new log text Alexei Starovoitov
2026-11-20 7:42 ` [PATCH bpf-next 45/49] selftests/bpf: Adjust tests that get another verdict or may_goto Alexei Starovoitov
2026-11-20 7:42 ` [PATCH bpf-next 46/49] selftests/bpf: Test barriers and far pointers Alexei Starovoitov
2026-11-20 7:42 ` [PATCH bpf-next 47/49] selftests/bpf: Test passes, instances, precision and the failing path Alexei Starovoitov
2026-11-20 8:30 ` sashiko-bot
2026-11-20 7:42 ` [PATCH bpf-next 48/49] selftests/bpf: Test equations Alexei Starovoitov
2026-11-20 7:42 ` [PATCH bpf-next 49/49] bpf, docs: Rewrite verifier.rst Alexei Starovoitov
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=sashiko-outbox-224675@kernel.org \
--to=sashiko-bot@kernel.org \
--cc=alexei.starovoitov@gmail.com \
--cc=bpf@vger.kernel.org \
--cc=sashiko-reviews@lists.linux.dev \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.