From: "Jeremy Rosen" <Rosen.Jeremy@tms-pty.com>
To: <linuxppc-embedded@lists.linuxppc.org>
Subject: RE: Problem using FEC on a860T
Date: Tue, 23 Oct 2001 12:00:50 +1100 [thread overview]
Message-ID: <sbd55c05.004@tms-pty.com> (raw)
well, actually the patch worked only partially...
the driver compiles, and registers properly, but doesn't seem to handle
RPC correctly.
I have the following message :
when both fec and normal CPM ENET are compiled,
RPC: sendmsg returned error 101
portmap: RPC call returned error 101
Root-NFS: Unable to get mountd port number from server, using default
then a second atempt on the default port, with the same error.
I have captured no packets on any of the interfaces.
when I compile only with fec ( no CPM ENET )
it blocks at
Looking up port of RPC 100003/2 on 172.16.0.1
I still can't capture any packets,
the feth enable led isn't lit,
and the collision and Tx leds of the board FOR THE CPM are blinking
continuously...
after a couple of seconds, the kernel starts scrolling
eth0: tx queue full!.
did I do something wrong ???
thx
Jeremy
** Sent via the linuxppc-embedded mail list. See http://lists.linuxppc.org/
next reply other threads:[~2001-10-23 1:00 UTC|newest]
Thread overview: 8+ messages / expand[flat|nested] mbox.gz Atom feed top
2001-10-23 1:00 Jeremy Rosen [this message]
2001-10-23 8:59 ` Problem using FEC on a860T Laurent Pinchart
-- strict thread matches above, loose matches on Subject: below --
2001-10-22 21:47 Jeremy Rosen
2001-10-22 14:51 Dave Ellis
2001-10-22 11:38 Borracini Evandro-R45188
2001-10-22 4:25 Jeremy Rosen
2001-10-22 11:46 ` Laurent Pinchart
2001-10-22 12:38 ` Young-Han, Kim
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=sbd55c05.004@tms-pty.com \
--to=rosen.jeremy@tms-pty.com \
--cc=linuxppc-embedded@lists.linuxppc.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.