From: Gerd Knorr <kraxel@bytesex.org>
To: linux-kernel@vger.kernel.org
Subject: Re: Linux 2.4.19-pre3
Date: 12 Mar 2002 10:35:35 GMT [thread overview]
Message-ID: <slrna8rmfn.46r.kraxel@bytesex.org> (raw)
In-Reply-To: <Pine.LNX.4.21.0203111805480.2492-100000@freak.distro.conectiva>
> Here goes -pre3, with the new IDE code. It has been stable enough time in
> the -ac tree, in my and Alan's opinion.
Doesn't boot my machine. "Intel machine check architecture supported"
is the last message printed before it just hangs.
Gerd
==============================[ cut here ]==============================
Linux version 2.4.19-pre3 (root@bogomips) (gcc version 2.95.3 20010315 (SuSE)) #2 Tue Mar 12 10:53:06 CET 2002
BIOS-provided physical RAM map:
BIOS-e820: 0000000000000000 - 000000000009f000 (usable)
BIOS-e820: 000000000009f000 - 00000000000a0000 (reserved)
BIOS-e820: 00000000000f0000 - 0000000000100000 (reserved)
BIOS-e820: 0000000000100000 - 000000003fffc000 (usable)
BIOS-e820: 000000003fffc000 - 000000003ffff000 (ACPI data)
BIOS-e820: 000000003ffff000 - 0000000040000000 (ACPI NVS)
BIOS-e820: 00000000ffff0000 - 0000000100000000 (reserved)
127MB HIGHMEM available.
On node 0 totalpages: 262140
zone(0): 4096 pages.
zone(1): 225280 pages.
zone(2): 32764 pages.
Local APIC disabled by BIOS -- reenabling.
Found and enabled local APIC!
Kernel command line: auto BOOT_IMAGE=2.4.19-pre3 ro root=306 console=ttyS0,115200n8 console=tty0
Initializing CPU#0
Detected 451.028 MHz processor.
Console: colour VGA+ 80x60
Calibrating delay loop... 897.84 BogoMIPS
Memory: 1033576k/1048560k available (784k kernel code, 14596k reserved, 275k data, 220k init, 131056k highmem)
Dentry-cache hash table entries: 131072 (order: 8, 1048576 bytes)
Inode-cache hash table entries: 65536 (order: 7, 524288 bytes)
Mount-cache hash table entries: 16384 (order: 5, 131072 bytes)
Buffer-cache hash table entries: 65536 (order: 6, 262144 bytes)
Page-cache hash table entries: 262144 (order: 8, 1048576 bytes)
CPU: L1 I cache: 16K, L1 D cache: 16K
CPU: L2 cache: 512K
Intel machine check architecture supported.
next prev parent reply other threads:[~2002-03-12 10:55 UTC|newest]
Thread overview: 45+ messages / expand[flat|nested] mbox.gz Atom feed top
2002-03-11 21:08 Linux 2.4.19-pre3 Marcelo Tosatti
2002-03-11 22:40 ` Eyal Lebedinsky
2002-03-11 23:03 ` Alan Cox
2002-03-11 22:55 ` Stephan von Krawczynski
2002-03-12 1:50 ` Mike Fedyk
2002-03-12 11:06 ` Stephan von Krawczynski
2002-03-12 21:59 ` Paul Mackerras
2002-03-11 23:04 ` Eyal Lebedinsky
2002-03-11 23:14 ` Keith Owens
2002-03-12 15:49 ` DevilKin
2002-03-21 12:06 ` [patch] Don't offer CONFIG_INDYDOG on non-ip22 machines Adrian Bunk
2002-03-22 21:13 ` Marcelo Tosatti
2002-03-11 23:21 ` Linux 2.4.19-pre3 Eyal Lebedinsky
2002-03-12 1:40 ` Takeo Saito
2002-03-12 0:04 ` J.A. Magallon
2002-03-12 0:37 ` Ken Brownfield
2002-03-19 2:41 ` I/O APIC fixed in 2.4.19-pre3 & 2.5.6 (was Re: Linux 2.4.19-pre3) Ken Brownfield
2002-03-19 16:22 ` Bill Davidsen
2002-03-20 0:34 ` Ken Brownfield
2002-03-20 4:36 ` Bill Davidsen
2002-03-12 10:35 ` Gerd Knorr [this message]
2002-03-12 17:24 ` Linux 2.4.19-pre3 Trond Myklebust
2002-03-12 17:47 ` Gerd Knorr
2002-03-12 13:01 ` Karsten Weiss
2002-03-12 13:17 ` Jens Axboe
2002-03-12 13:37 ` Alan Cox
2002-03-12 13:46 ` Jens Axboe
2002-03-12 19:02 ` Marcelo Tosatti
2002-03-13 8:09 ` Jens Axboe
2002-03-13 9:00 ` Andre Hedrick
2002-03-13 9:27 ` Jens Axboe
2002-03-13 9:33 ` Andre Hedrick
2002-03-13 17:32 ` Andre Hedrick
2002-03-13 17:40 ` Jens Axboe
2002-03-13 18:52 ` Andre Hedrick
2002-03-14 4:41 ` Marcelo Tosatti
2002-03-14 6:28 ` Andre Hedrick
2002-03-14 3:32 ` Michal Jaegermann
2002-03-12 14:47 ` J.A. Magallon
2002-03-12 13:31 ` Jurgen Philippaerts
2002-03-12 15:43 ` Geert Uytterhoeven
-- strict thread matches above, loose matches on Subject: below --
2002-03-12 0:51 Mikael Pettersson
2002-03-12 5:13 ` skidley
2002-03-12 21:00 ` Dave Jones
[not found] <fa.npg7nmv.si46bq@ifi.uio.no>
2002-03-12 7:26 ` junkio
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=slrna8rmfn.46r.kraxel@bytesex.org \
--to=kraxel@bytesex.org \
--cc=linux-kernel@vger.kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.