[tip:x86/platform] x86/pmc_atom: Eisable a few S0ix wake up events for S0ix residency

["tip-bot for Li, Aubrey" <tipbot@zytor.com>]

Commit-ID:  b00055cade45379fb6a51798b70ef520d7555c5f
Gitweb:     http://git.kernel.org/tip/b00055cade45379fb6a51798b70ef520d7555c5f
Author:     Li, Aubrey <aubrey.li@linux.intel.com>
AuthorDate: Mon, 30 Jun 2014 14:09:38 +0800
Committer:  H. Peter Anvin <hpa@linux.intel.com>
CommitDate: Fri, 25 Jul 2014 14:11:58 -0700

x86/pmc_atom: Eisable a few S0ix wake up events for S0ix residency

Disable PMC S0IX_WAKE_EN events coming from LPC block(unused) and
also from GPIO_SUS ored dedicated IRQs (must be disabled as per PMC
programming rule), GPIOSCORE ored dedicated IRQs (must be disabled
as per PMC programming rule), GPIO_SUS shared IRQ (not necessary
since the IOAPIC_DS wake event will still work), GPIO_SCORE shared
IRQ (not necessary since the IOAPIC_DS wake event will still work).

Signed-off-by: Aubrey Li <aubrey.li@linux.intel.com>
Link: http://lkml.kernel.org/r/53B0FF22.5080403@linux.intel.com
Signed-off-by: Olivier Leveque <olivier.leveque@intel.com>
Signed-off-by: H. Peter Anvin <hpa@linux.intel.com>
---
 arch/x86/include/asm/pmc_atom.h | 21 +++++++++++++++++++++
 arch/x86/kernel/pmc_atom.c      | 42 +++++++++++++++++++++++++++++++++++++++++
 2 files changed, 63 insertions(+)

diff --git a/arch/x86/include/asm/pmc_atom.h b/arch/x86/include/asm/pmc_atom.h
index 03a2769..8e47e5d 100644
--- a/arch/x86/include/asm/pmc_atom.h
+++ b/arch/x86/include/asm/pmc_atom.h
@@ -19,6 +19,27 @@
 /* ValleyView Power Control Unit PCI Device ID */
 #define	PCI_DEVICE_ID_VLV_PMC	0x0F1C
 
+/* PMC Memory mapped IO registers */
+#define	PMC_BASE_ADDR_OFFSET	0x44
+#define	PMC_BASE_ADDR_MASK	0xFFFFFE00
+#define	PMC_MMIO_REG_LEN	0x100
+#define	PMC_REG_BIT_WIDTH	32
+
+/* S0ix wake event control */
+#define	PMC_S0IX_WAKE_EN	0x3C
+
+#define	BIT_LPC_CLOCK_RUN		BIT(4)
+#define	BIT_SHARED_IRQ_GPSC		BIT(5)
+#define	BIT_ORED_DEDICATED_IRQ_GPSS	BIT(18)
+#define	BIT_ORED_DEDICATED_IRQ_GPSC	BIT(19)
+#define	BIT_SHARED_IRQ_GPSS		BIT(20)
+
+#define	PMC_WAKE_EN_SETTING	~(BIT_LPC_CLOCK_RUN | \
+				BIT_SHARED_IRQ_GPSC | \
+				BIT_ORED_DEDICATED_IRQ_GPSS | \
+				BIT_ORED_DEDICATED_IRQ_GPSC | \
+				BIT_SHARED_IRQ_GPSS)
+
 /* PMC I/O Registers */
 #define	ACPI_BASE_ADDR_OFFSET	0x40
 #define	ACPI_BASE_ADDR_MASK	0xFFFFFE00
diff --git a/arch/x86/kernel/pmc_atom.c b/arch/x86/kernel/pmc_atom.c
index 9eb79f6..d6cc0e9 100644
--- a/arch/x86/kernel/pmc_atom.c
+++ b/arch/x86/kernel/pmc_atom.c
@@ -23,8 +23,24 @@
 
 #include <asm/pmc_atom.h>
 
+struct pmc_dev {
+	u32 base_addr;
+	void __iomem *regmap;
+};
+
+static struct pmc_dev pmc_device;
 static u32 acpi_base_addr;
 
+static inline u32 pmc_reg_read(struct pmc_dev *pmc, int reg_offset)
+{
+	return readl(pmc->regmap + reg_offset);
+}
+
+static inline void pmc_reg_write(struct pmc_dev *pmc, int reg_offset, u32 val)
+{
+	writel(val, pmc->regmap + reg_offset);
+}
+
 static void pmc_power_off(void)
 {
 	u16	pm1_cnt_port;
@@ -42,8 +58,23 @@ static void pmc_power_off(void)
 	outl(pm1_cnt_value, pm1_cnt_port);
 }
 
+static void pmc_hw_reg_setup(struct pmc_dev *pmc)
+{
+	/*
+	 * Disable PMC S0IX_WAKE_EN events coming from:
+	 * - LPC clock run
+	 * - GPIO_SUS ored dedicated IRQs
+	 * - GPIO_SCORE ored dedicated IRQs
+	 * - GPIO_SUS shared IRQ
+	 * - GPIO_SCORE shared IRQ
+	 */
+	pmc_reg_write(pmc, PMC_S0IX_WAKE_EN, (u32)PMC_WAKE_EN_SETTING);
+}
+
 static int pmc_setup_dev(struct pci_dev *pdev)
 {
+	struct pmc_dev *pmc = &pmc_device;
+
 	/* Obtain ACPI base address */
 	pci_read_config_dword(pdev, ACPI_BASE_ADDR_OFFSET, &acpi_base_addr);
 	acpi_base_addr &= ACPI_BASE_ADDR_MASK;
@@ -52,6 +83,17 @@ static int pmc_setup_dev(struct pci_dev *pdev)
 	if (acpi_base_addr != 0 && pm_power_off == NULL)
 		pm_power_off = pmc_power_off;
 
+	pci_read_config_dword(pdev, PMC_BASE_ADDR_OFFSET, &pmc->base_addr);
+	pmc->base_addr &= PMC_BASE_ADDR_MASK;
+
+	pmc->regmap = ioremap_nocache(pmc->base_addr, PMC_MMIO_REG_LEN);
+	if (!pmc->regmap) {
+		dev_err(&pdev->dev, "error: ioremap failed\n");
+		return -ENOMEM;
+	}
+
+	/* PMC hardware registers setup */
+	pmc_hw_reg_setup(pmc);
 	return 0;
 }