From: tip-bot for Peter Zijlstra <a.p.zijlstra@chello.nl>
To: linux-tip-commits@vger.kernel.org
Cc: linux-kernel@vger.kernel.org, hpa@zytor.com, mingo@kernel.org,
a.p.zijlstra@chello.nl, tglx@linutronix.de, venki@google.com
Subject: [tip:sched/urgent] sched/nohz: Fix rq-> cpu_load calculations some more
Date: Wed, 30 May 2012 06:36:15 -0700 [thread overview]
Message-ID: <tip-kt0trz0apodbf84ucjfdbr1a@git.kernel.org> (raw)
Commit-ID: 5aaa0b7a2ed5b12692c9ffb5222182bd558d3146
Gitweb: http://git.kernel.org/tip/5aaa0b7a2ed5b12692c9ffb5222182bd558d3146
Author: Peter Zijlstra <a.p.zijlstra@chello.nl>
AuthorDate: Thu, 17 May 2012 17:15:29 +0200
Committer: Ingo Molnar <mingo@kernel.org>
CommitDate: Wed, 30 May 2012 14:02:16 +0200
sched/nohz: Fix rq->cpu_load calculations some more
Follow up on commit 556061b00 ("sched/nohz: Fix rq->cpu_load[]
calculations") since while that fixed the busy case it regressed the
mostly idle case.
Add a callback from the nohz exit to also age the rq->cpu_load[]
array. This closes the hole where either there was no nohz load
balance pass during the nohz, or there was a 'significant' amount of
idle time between the last nohz balance and the nohz exit.
So we'll update unconditionally from the tick to not insert any
accidental 0 load periods while busy, and we try and catch up from
nohz idle balance and nohz exit. Both these are still prone to missing
a jiffy, but that has always been the case.
Signed-off-by: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: pjt@google.com
Cc: Venkatesh Pallipadi <venki@google.com>
Link: http://lkml.kernel.org/n/tip-kt0trz0apodbf84ucjfdbr1a@git.kernel.org
Signed-off-by: Ingo Molnar <mingo@kernel.org>
---
include/linux/sched.h | 1 +
kernel/sched/core.c | 53 +++++++++++++++++++++++++++++++++++++--------
kernel/time/tick-sched.c | 1 +
3 files changed, 45 insertions(+), 10 deletions(-)
diff --git a/include/linux/sched.h b/include/linux/sched.h
index f45c0b2..d61e597 100644
--- a/include/linux/sched.h
+++ b/include/linux/sched.h
@@ -145,6 +145,7 @@ extern unsigned long this_cpu_load(void);
extern void calc_global_load(unsigned long ticks);
+extern void update_cpu_load_nohz(void);
extern unsigned long get_parent_ip(unsigned long addr);
diff --git a/kernel/sched/core.c b/kernel/sched/core.c
index 39eb601..75844a8 100644
--- a/kernel/sched/core.c
+++ b/kernel/sched/core.c
@@ -2517,25 +2517,32 @@ static void __update_cpu_load(struct rq *this_rq, unsigned long this_load,
sched_avg_update(this_rq);
}
+#ifdef CONFIG_NO_HZ
+/*
+ * There is no sane way to deal with nohz on smp when using jiffies because the
+ * cpu doing the jiffies update might drift wrt the cpu doing the jiffy reading
+ * causing off-by-one errors in observed deltas; {0,2} instead of {1,1}.
+ *
+ * Therefore we cannot use the delta approach from the regular tick since that
+ * would seriously skew the load calculation. However we'll make do for those
+ * updates happening while idle (nohz_idle_balance) or coming out of idle
+ * (tick_nohz_idle_exit).
+ *
+ * This means we might still be one tick off for nohz periods.
+ */
+
/*
* Called from nohz_idle_balance() to update the load ratings before doing the
* idle balance.
*/
void update_idle_cpu_load(struct rq *this_rq)
{
- unsigned long curr_jiffies = jiffies;
+ unsigned long curr_jiffies = ACCESS_ONCE(jiffies);
unsigned long load = this_rq->load.weight;
unsigned long pending_updates;
/*
- * Bloody broken means of dealing with nohz, but better than nothing..
- * jiffies is updated by one cpu, another cpu can drift wrt the jiffy
- * update and see 0 difference the one time and 2 the next, even though
- * we ticked at roughtly the same rate.
- *
- * Hence we only use this from nohz_idle_balance() and skip this
- * nonsense when called from the scheduler_tick() since that's
- * guaranteed a stable rate.
+ * bail if there's load or we're actually up-to-date.
*/
if (load || curr_jiffies == this_rq->last_load_update_tick)
return;
@@ -2547,12 +2554,38 @@ void update_idle_cpu_load(struct rq *this_rq)
}
/*
+ * Called from tick_nohz_idle_exit() -- try and fix up the ticks we missed.
+ */
+void update_cpu_load_nohz(void)
+{
+ struct rq *this_rq = this_rq();
+ unsigned long curr_jiffies = ACCESS_ONCE(jiffies);
+ unsigned long pending_updates;
+
+ if (curr_jiffies == this_rq->last_load_update_tick)
+ return;
+
+ raw_spin_lock(&this_rq->lock);
+ pending_updates = curr_jiffies - this_rq->last_load_update_tick;
+ if (pending_updates) {
+ this_rq->last_load_update_tick = curr_jiffies;
+ /*
+ * We were idle, this means load 0, the current load might be
+ * !0 due to remote wakeups and the sort.
+ */
+ __update_cpu_load(this_rq, 0, pending_updates);
+ }
+ raw_spin_unlock(&this_rq->lock);
+}
+#endif /* CONFIG_NO_HZ */
+
+/*
* Called from scheduler_tick()
*/
static void update_cpu_load_active(struct rq *this_rq)
{
/*
- * See the mess in update_idle_cpu_load().
+ * See the mess around update_idle_cpu_load() / update_cpu_load_nohz().
*/
this_rq->last_load_update_tick = jiffies;
__update_cpu_load(this_rq, this_rq->load.weight, 1);
diff --git a/kernel/time/tick-sched.c b/kernel/time/tick-sched.c
index 6a3a5b9..0c927cd 100644
--- a/kernel/time/tick-sched.c
+++ b/kernel/time/tick-sched.c
@@ -576,6 +576,7 @@ void tick_nohz_idle_exit(void)
/* Update jiffies first */
select_nohz_load_balancer(0);
tick_do_update_jiffies64(now);
+ update_cpu_load_nohz();
#ifndef CONFIG_VIRT_CPU_ACCOUNTING
/*
reply other threads:[~2012-05-30 13:36 UTC|newest]
Thread overview: [no followups] expand[flat|nested] mbox.gz Atom feed
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=tip-kt0trz0apodbf84ucjfdbr1a@git.kernel.org \
--to=a.p.zijlstra@chello.nl \
--cc=hpa@zytor.com \
--cc=linux-kernel@vger.kernel.org \
--cc=linux-tip-commits@vger.kernel.org \
--cc=mingo@kernel.org \
--cc=tglx@linutronix.de \
--cc=venki@google.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.