From: Karl Kleinpaste <karl@kleinpaste.org>
To: alsa-devel@alsa-project.org
Subject: pulseaudio complains of bad pcm delay values
Date: Sun, 05 Jul 2009 09:24:08 -0400 [thread overview]
Message-ID: <vxkab3j2rgn.fsf@awol.kleinpaste.org> (raw)
I'm sending this somewhat blindly, due to messages from the nightly log
summary. I'm just cut/pasting what is there. It says "report this to
alsa developers," but it would have been kinda cool if somebody would
have included a definite address to which such a report should be sent.
(First try, I sent this to alsa-devel@sourceforge. Got a bounce about
the list having moved. Resending as indicated. No, I'm not subscribing
to the list. Sorry, but I'm offering a bug report per request, not
trying to engage in general devel conversation on this topic.)
Hardware is a Toshiba Satellite P205 series, with this sound hardware:
00:1b.0 Audio device: Intel Corporation 82801H (ICH8 Family) HD Audio Controller (rev 03)
Subsystem: Toshiba America Info Systems Device ff00
Flags: bus master, fast devsel, latency 0, IRQ 22
Memory at f8500000 (64-bit, non-prefetchable) [size=16K]
Capabilities: [50] Power Management version 2
Capabilities: [60] MSI: Mask- 64bit+ Count=1/1 Enable-
Capabilities: [70] Express Root Complex Integrated Endpoint, MSI 00
Capabilities: [100] Virtual Channel <?>
Capabilities: [130] Root Complex Link <?>
Kernel driver in use: HDA Intel
Kernel modules: snd-hda-intel
This is Fedora11, 2.6.29.5-191.fc11.i686.PAE (32-bit, obviously).
Jul 4 09:20:35 awol pulseaudio[2835]: alsa-util.c: snd_pcm_delay() returned a value that is exceptionally large: 1480877280 bytes (8394995 ms).
Jul 4 09:20:35 awol pulseaudio[2835]: alsa-util.c: Most likely this is a bug in the ALSA driver 'snd_hda_intel'. Please report this issue to the ALSA developers.
Jul 4 09:20:35 awol pulseaudio[2835]: alsa-util.c: snd_pcm_dump():
Jul 4 09:20:35 awol pulseaudio[2835]: alsa-util.c: Soft volume PCM
Jul 4 09:20:35 awol pulseaudio[2835]: alsa-util.c: Control: PCM Playback Volume
Jul 4 09:20:35 awol pulseaudio[2835]: alsa-util.c: min_dB: -51
Jul 4 09:20:35 awol pulseaudio[2835]: alsa-util.c: max_dB: 0
Jul 4 09:20:35 awol pulseaudio[2835]: alsa-util.c: resolution: 256
Jul 4 09:20:35 awol pulseaudio[2835]: alsa-util.c: Its setup is:
Jul 4 09:20:35 awol pulseaudio[2835]: alsa-util.c: stream : CAPTURE
Jul 4 09:20:35 awol pulseaudio[2835]: alsa-util.c: access : MMAP_INTERLEAVED
Jul 4 09:20:35 awol pulseaudio[2835]: alsa-util.c: format : S16_LE
Jul 4 09:20:35 awol pulseaudio[2835]: alsa-util.c: subformat : STD
Jul 4 09:20:35 awol pulseaudio[2835]: alsa-util.c: channels : 2
Jul 4 09:20:35 awol pulseaudio[2835]: alsa-util.c: rate : 44100
Jul 4 09:20:35 awol pulseaudio[2835]: alsa-util.c: exact rate : 44100 (44100/1)
Jul 4 09:20:35 awol pulseaudio[2835]: alsa-util.c: msbits : 16
Jul 4 09:20:35 awol pulseaudio[2835]: alsa-util.c: buffer_size : 88192
Jul 4 09:20:35 awol pulseaudio[2835]: alsa-util.c: period_size : 44096
Jul 4 09:20:35 awol pulseaudio[2835]: alsa-util.c: period_time : 999909
Jul 4 09:20:35 awol pulseaudio[2835]: alsa-util.c: tstamp_mode : ENABLE
Jul 4 09:20:35 awol pulseaudio[2835]: alsa-util.c: period_step : 1
Jul 4 09:20:35 awol pulseaudio[2835]: alsa-util.c: avail_min : 87310
Jul 4 09:20:35 awol pulseaudio[2835]: alsa-util.c: period_event : 0
Jul 4 09:20:35 awol pulseaudio[2835]: alsa-util.c: start_threshold : -1
Jul 4 09:20:35 awol pulseaudio[2835]: alsa-util.c: stop_threshold : 1444937728
Jul 4 09:20:35 awol pulseaudio[2835]: alsa-util.c: silence_threshold: 0
Jul 4 09:20:35 awol pulseaudio[2835]: alsa-util.c: silence_size : 0
Jul 4 09:20:35 awol pulseaudio[2835]: alsa-util.c: boundary : 1444937728
Jul 4 09:20:35 awol pulseaudio[2835]: alsa-util.c: Slave: Hardware PCM card 0 'HDA Intel' device 0 subdevice 0
Jul 4 09:20:35 awol pulseaudio[2835]: alsa-util.c: Its setup is:
Jul 4 09:20:35 awol pulseaudio[2835]: alsa-util.c: stream : CAPTURE
Jul 4 09:20:35 awol pulseaudio[2835]: alsa-util.c: access : MMAP_INTERLEAVED
Jul 4 09:20:35 awol pulseaudio[2835]: alsa-util.c: format : S16_LE
Jul 4 09:20:35 awol pulseaudio[2835]: alsa-util.c: subformat : STD
Jul 4 09:20:35 awol pulseaudio[2835]: alsa-util.c: channels : 2
Jul 4 09:20:35 awol pulseaudio[2835]: alsa-util.c: rate : 44100
Jul 4 09:20:35 awol pulseaudio[2835]: alsa-util.c: exact rate : 44100 (44100/1)
Jul 4 09:20:35 awol pulseaudio[2835]: alsa-util.c: msbits : 16
Jul 4 09:20:35 awol pulseaudio[2835]: alsa-util.c: buffer_size : 88192
Jul 4 09:20:35 awol pulseaudio[2835]: alsa-util.c: period_size : 44096
Jul 4 09:20:35 awol pulseaudio[2835]: alsa-util.c: period_time : 999909
Jul 4 09:20:35 awol pulseaudio[2835]: alsa-util.c: tstamp_mode : ENABLE
Jul 4 09:20:35 awol pulseaudio[2835]: alsa-util.c: period_step : 1
Jul 4 09:20:35 awol pulseaudio[2835]: alsa-util.c: avail_min : 87310
Jul 4 09:20:35 awol pulseaudio[2835]: alsa-util.c: period_event : 0
Jul 4 09:20:35 awol pulseaudio[2835]: alsa-util.c: start_threshold : -1
Jul 4 09:20:35 awol pulseaudio[2835]: alsa-util.c: stop_threshold : 1444937728
Jul 4 09:20:35 awol pulseaudio[2835]: alsa-util.c: silence_threshold: 0
Jul 4 09:20:35 awol pulseaudio[2835]: alsa-util.c: silence_size : 0
Jul 4 09:20:35 awol pulseaudio[2835]: alsa-util.c: boundary : 1444937728
Jul 4 09:20:35 awol pulseaudio[2835]: alsa-util.c: appl_ptr : 932488
Jul 4 09:20:35 awol pulseaudio[2835]: alsa-util.c: hw_ptr : 1444893632
Jul 4 09:20:40 awol pulseaudio[2835]: ratelimit.c: 1106 events suppressed
Jul 4 09:20:45 awol pulseaudio[2835]: cpulimit.c: Received request to terminate due to CPU overload.
Jul 4 09:20:47 awol pulseaudio[2835]: memblock.c: Memory pool destroyed but not all memory blocks freed! 236 remain.
Jul 4 09:26:13 awol pulseaudio[17025]: alsa-sink.c: Increasing minimal latency to 1.00 ms
Jul 4 09:26:13 awol pulseaudio[17025]: alsa-sink.c: Increasing minimal latency to 2.00 ms
Jul 4 09:36:02 awol pulseaudio[17025]: alsa-source.c: Increasing minimal latency to 1.00 ms
Jul 4 09:36:02 awol pulseaudio[17025]: alsa-source.c: Increasing minimal latency to 2.00 ms
Jul 4 09:36:03 awol pulseaudio[17025]: alsa-source.c: Increasing minimal latency to 4.00 ms
Jul 4 09:36:08 awol pulseaudio[17025]: alsa-source.c: Increasing minimal latency to 8.00 ms
Jul 4 09:36:09 awol pulseaudio[17025]: alsa-source.c: Increasing minimal latency to 16.00 ms
Jul 4 09:36:11 awol pulseaudio[17025]: alsa-source.c: Increasing minimal latency to 26.00 ms
Jul 4 09:36:12 awol pulseaudio[17025]: alsa-source.c: Increasing wakeup watermark to 15.99 ms
Jul 4 09:36:14 awol pulseaudio[17025]: alsa-source.c: Increasing minimal latency to 36.00 ms
Jul 4 09:36:26 awol pulseaudio[17025]: alsa-source.c: Increasing wakeup watermark to 25.99 ms
Jul 4 09:36:33 awol pulseaudio[17025]: alsa-source.c: Increasing minimal latency to 46.00 ms
Jul 4 09:36:44 awol pulseaudio[17025]: alsa-source.c: Increasing wakeup watermark to 35.99 ms
Jul 4 09:38:48 awol pulseaudio[17025]: alsa-source.c: Increasing minimal latency to 56.00 ms
reply other threads:[~2009-07-05 13:24 UTC|newest]
Thread overview: [no followups] expand[flat|nested] mbox.gz Atom feed
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=vxkab3j2rgn.fsf@awol.kleinpaste.org \
--to=karl@kleinpaste.org \
--cc=alsa-devel@alsa-project.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.