From mboxrd@z Thu Jan 1 00:00:00 1970 From: "werner" Subject: 2.6.38.3 ss boot problem and crash Date: Sat, 16 Apr 2011 15:11:02 -0400 Message-ID: Mime-Version: 1.0 Content-Type: text/plain; charset=utf-8; format=flowed Content-Transfer-Encoding: QUOTED-PRINTABLE Return-path: Received: from zfrontend1.aha.ru ([195.2.83.147]:44045 "EHLO zfrontend1.aha.ru" rhost-flags-OK-OK-OK-OK) by vger.kernel.org with ESMTP id S1752975Ab1DPTLJ (ORCPT ); Sat, 16 Apr 2011 15:11:09 -0400 Sender: linux-scsi-owner@vger.kernel.org List-Id: linux-scsi@vger.kernel.org To: James.Bottomley@HansenPartnership.com, mingo@elte.hu, Andrew Morton , werner , gregkh@suse.de, tj@kernel.org, randy.dunlap@oracle.comlin The following problem, with 2.6.38.3 gives the error=20 messages, and with 2.6.39-rc3-git6 let crash the laptop.=20 With 2.6.26.2 the same sistem boots normally. (copy of dmesg, with error messages) W.Landgraf =3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D= =3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D -0x007f] pnp 00:08: disabling [io 0x0038-0x0039 disabled] because=20 it overlaps 0000:00:1f.6 BAR 1 [io 0x0000-0x007f] pnp 00:08: disabling [io 0x003c-0x003d disabled] because=20 it overlaps 0000:00:1f.6 BAR 1 [io 0x0000-0x007f] pnp 00:08: disabling [io 0x0050-0x0053 disabled] because=20 it overlaps 0000:00:1f.6 BAR 1 [io 0x0000-0x007f] pnp 00:08: disabling [io 0x0063 disabled] because it=20 overlaps 0000:00:1f.6 BAR 1 [io 0x0000-0x007f] pnp 00:08: disabling [io 0x0065 disabled] because it=20 overlaps 0000:00:1f.6 BAR 1 [io 0x0000-0x007f] pnp 00:08: disabling [io 0x0072-0x0077 disabled] because=20 it overlaps 0000:00:1f.6 BAR 1 [io 0x0000-0x007f] system 00:08: [io 0x01e0-0x01ef] has been reserved system 00:08: [io 0x0480-0x048f] has been reserved system 00:08: [io 0x0680-0x06ff] has been reserved system 00:08: [io 0xd800-0xd87f] has been reserved system 00:08: [io 0xd880-0xd89f] has been reserved system 00:08: [io 0xe000-0xe07f] has been reserved system 00:08: [io 0xe080-0xe0ff] has been reserved system 00:08: [io 0xe400-0xe47f] has been reserved system 00:08: [io 0xe480-0xe4ff] has been reserved system 00:08: [io 0xe800-0xe87f] has been reserved system 00:08: [io 0xe880-0xe8ff] has been reserved system 00:08: [io 0xec00-0xec7f] has been reserved system 00:08: [io 0xec80-0xecff] has been reserved system 00:08: [io 0xeeb0-0xeebf] has been reserved system 00:08: [io 0xeec0-0xeeff] has been reserved system 00:08: [io 0x04d0-0x04d1] has been reserved system 00:08: Plug and Play ACPI device, IDs PNP0c02=20 (active) pnp: PnP ACPI: found 9 devices ACPI: ACPI bus type pnp unregistered PnPBIOS: Disabled by ACPI PNP mdacon: MDA with 8K of memory detected. Console: switching consoles 13-16 to MDA-2 Switching to clocksource acpi_pm pci 0000:00:1e.0: BAR 15: assigned [mem=20 0x20000000-0x27ffffff pref] pci 0000:00:1d.7: BAR 0: assigned [mem=20 0x28000000-0x280003ff] pci 0000:00:1d.7: BAR 0: set to [mem=20 0x28000000-0x280003ff] (PCI address=20 [0x28000000-0x280003ff]) pci 0000:00:1f.5: BAR 2: assigned [mem=20 0x28000800-0x280009ff] pci 0000:00:1f.5: BAR 2: set to [mem=20 0x28000800-0x280009ff] (PCI address=20 [0x28000800-0x280009ff]) pci 0000:00:1f.5: BAR 0: assigned [io 0x1000-0x10ff] pci 0000:00:1f.5: BAR 0: set to [io 0x1000-0x10ff] (PCI=20 address [0x1000-0x10ff]) pci 0000:00:1f.5: BAR 3: assigned [mem=20 0x28000a00-0x28000aff] pci 0000:00:1f.5: BAR 3: set to [mem=20 0x28000a00-0x28000aff] (PCI address=20 [0x28000a00-0x28000aff]) pci 0000:00:1f.6: BAR 0: assigned [io 0x1400-0x14ff] pci 0000:00:1f.6: BAR 0: set to [io 0x1400-0x14ff] (PCI=20 address [0x1400-0x14ff]) pci 0000:00:1f.6: BAR 1: assigned [io 0x1800-0x187f] pci 0000:00:1f.6: BAR 1: set to [io 0x1800-0x187f] (PCI=20 address [0x1800-0x187f]) pci 0000:00:1f.5: BAR 1: assigned [io 0x1880-0x18bf] pci 0000:00:1f.5: BAR 1: set to [io 0x1880-0x18bf] (PCI=20 address [0x1880-0x18bf]) pci 0000:00:1d.0: BAR 4: assigned [io 0x18c0-0x18df] pci 0000:00:1d.0: BAR 4: set to [io 0x18c0-0x18df] (PCI=20 address [0x18c0-0x18df]) pci 0000:00:1d.1: BAR 4: assigned [io 0x18e0-0x18ff] pci 0000:00:1d.1: BAR 4: set to [io 0x18e0-0x18ff] (PCI=20 address [0x18e0-0x18ff]) pci 0000:00:1d.2: BAR 4: assigned [io 0x1c00-0x1c1f] pci 0000:00:1d.2: BAR 4: set to [io 0x1c00-0x1c1f] (PCI=20 address [0x1c00-0x1c1f]) pci 0000:01:00.0: BAR 6: can't assign mem pref (size=20 0x20000) pci 0000:00:01.0: PCI bridge to [bus 01-01] pci 0000:00:01.0: bridge window [io disabled] pci 0000:00:01.0: bridge window [mem=20 0xcf000000-0xcfffffff] pci 0000:00:01.0: bridge window [mem=20 0xa0000000-0xafffffff pref] pci 0000:02:09.0: BAR 0: assigned [mem=20 0x20000000-0x23ffffff pref] pci 0000:02:09.0: BAR 0: set to [mem 0x20000000-0x23ffffff=20 pref] (PCI address [0x20000000-0x23ffffff]) pci 0000:02:0b.0: BAR 15: assigned [mem=20 0x24000000-0x27ffffff pref] pci 0000:02:0b.0: BAR 16: assigned [mem=20 0x2c000000-0x2fffffff] pci 0000:02:0b.2: BAR 1: assigned [mem=20 0xcee00000-0xcee03fff] pci 0000:02:0b.2: BAR 1: set to [mem=20 0xcee00000-0xcee03fff] (PCI address=20 [0xcee00000-0xcee03fff]) pci 0000:02:0b.3: BAR 0: assigned [mem=20 0xcee04000-0xcee05fff] pci 0000:02:0b.3: BAR 0: set to [mem=20 0xcee04000-0xcee05fff] (PCI address=20 [0xcee04000-0xcee05fff]) pci 0000:02:0b.0: BAR 0: assigned [mem=20 0xcee06000-0xcee06fff] pci 0000:02:0b.0: BAR 0: set to [mem=20 0xcee06000-0xcee06fff] (PCI address=20 [0xcee06000-0xcee06fff]) pci 0000:02:0b.2: BAR 0: assigned [mem=20 0xcee07000-0xcee077ff] pci 0000:02:0b.2: BAR 0: set to [mem=20 0xcee07000-0xcee077ff] (PCI address=20 [0xcee07000-0xcee077ff]) pci 0000:02:0b.0: BAR 13: assigned [io 0xc000-0xc0ff] pci 0000:02:0b.0: BAR 14: assigned [io 0xc400-0xc4ff] pci 0000:02:0b.4: BAR 0: assigned [mem=20 0xcee07800-0xcee078ff] pci 0000:02:0b.4: BAR 0: set to [mem=20 0xcee07800-0xcee078ff] (PCI address=20 [0xcee07800-0xcee078ff]) pci 0000:02:0b.4: BAR 1: assigned [mem=20 0xcee07900-0xcee079ff] pci 0000:02:0b.4: BAR 1: set to [mem=20 0xcee07900-0xcee079ff] (PCI address=20 [0xcee07900-0xcee079ff]) pci 0000:02:0b.4: BAR 2: assigned [mem=20 0xcee07a00-0xcee07aff] pci 0000:02:0b.4: BAR 2: set to [mem=20 0xcee07a00-0xcee07aff] (PCI address=20 [0xcee07a00-0xcee07aff]) pci 0000:02:0b.0: CardBus bridge to [bus 03-03] pci 0000:02:0b.0: bridge window [io 0xc000-0xc0ff] pci 0000:02:0b.0: bridge window [io 0xc400-0xc4ff] pci 0000:02:0b.0: bridge window [mem=20 0x24000000-0x27ffffff pref] pci 0000:02:0b.0: bridge window [mem=20 0x2c000000-0x2fffffff] pci 0000:00:1e.0: PCI bridge to [bus 02-04] pci 0000:00:1e.0: bridge window [io 0xc000-0xcfff] pci 0000:00:1e.0: bridge window [mem=20 0xcee00000-0xceefffff] pci 0000:00:1e.0: bridge window [mem=20 0x20000000-0x27ffffff pref] pci 0000:00:1e.0: setting latency timer to 64 pci 0000:02:0b.0: enabling device (0000 -> 0003) ACPI: PCI Interrupt Link [LNKA] enabled at IRQ 11 PCI: setting IRQ 11 as level-triggered pci 0000:02:0b.0: PCI INT A -> Link[LNKA] -> GSI 11=20 (level, low) -> IRQ 11 pci_bus 0000:00: resource 0 [io 0x0000-0xffff] pci_bus 0000:00: resource 1 [mem 0x00000000-0xffffffff] pci_bus 0000:01: resource 1 [mem 0xcf000000-0xcfffffff] pci_bus 0000:01: resource 2 [mem 0xa0000000-0xafffffff=20 pref] pci_bus 0000:02: resource 0 [io 0xc000-0xcfff] pci_bus 0000:02: resource 1 [mem 0xcee00000-0xceefffff] pci_bus 0000:02: resource 2 [mem 0x20000000-0x27ffffff=20 pref] pci_bus 0000:02: resource 4 [io 0x0000-0xffff] pci_bus 0000:02: resource 5 [mem 0x00000000-0xffffffff] pci_bus 0000:03: resource 0 [io 0xc000-0xc0ff] pci_bus 0000:03: resource 1 [io 0xc400-0xc4ff] pci_bus 0000:03: resource 2 [mem 0x24000000-0x27ffffff=20 pref] pci_bus 0000:03: resource 3 [mem 0x2c000000-0x2fffffff] NET: Registered protocol family 2 IP route cache hash table entries: 4096 (order: 2, 16384=20 bytes) TCP established hash table entries: 16384 (order: 5,=20 131072 bytes) TCP bind hash table entries: 16384 (order: 5, 131072=20 bytes) TCP: Hash tables configured (established 16384 bind 16384) TCP reno registered UDP hash table entries: 256 (order: 1, 8192 bytes) UDP-Lite hash table entries: 256 (order: 1, 8192 bytes) NET: Registered protocol family 1 RPC: Registered udp transport module. RPC: Registered tcp transport module. RPC: Registered tcp NFSv4.1 backchannel transport module. pci 0000:01:00.0: Boot video device pci 0000:02:08.0: Firmware left e100 interrupts enabled;=20 disabling PCI: CLS 32 bytes, default 64 Simple Boot Flag at 0x7c set to 0x1 Machine check injector initialized elanfreq: error: no Elan processor found! cpufreq-nforce2: No nForce2 chipset. apm: BIOS version 1.2 Flags 0x02 (Driver version 1.16ac) apm: overridden by ACPI. microcode: CPU0 sig=3D0x6d6, pf=3D0x20, revision=3D0x17 microcode: Microcode Update Driver: v2.00=20 , Peter Oruba scx200: NatSemi SCx200 Driver audit: initializing netlink socket (disabled) type=3D2000 audit(1302979948.433:1): initialized HugeTLB registered 4 MB page size, pre-allocated 0 pages VFS: Disk quotas dquot_6.5.2 Dquot-cache hash table entries: 1024 (order 0, 4096 bytes) DLM (built Apr 15 2011 02:33:33) installed squashfs: version 4.0 (2009/01/31) Phillip Lougher Registering the id_resolver key type =46S-Cache: Netfs 'nfs' registered for caching nfs4filelayout_init: NFSv4 File Layout Driver=20 Registering... Installing knfsd (copyright (C) 1996 okir@monad.swb.de). =46S-Cache: Netfs 'cifs' registered for caching NTFS driver 2.1.30 [Flags: R/W]. EFS: 1.0a - http://aeschi.ch.eu.org/efs/ JFFS2 version 2.2. (NAND) (SUMMARY) =C3=82=C2=A9 2001-2006 Red Hat,=20 Inc. ROMFS MTD (C) 2007 Red Hat, Inc. QNX4 filesystem 0.2.3 registered. fuse init (API version 7.16) JFS: nTxBlock =3D 3874, nTxLock =3D 30994 SGI XFS with ACLs, security attributes, realtime, large=20 block/inode numbers, no debug enabled SGI XFS Quota Management subsystem NILFS version 2 loaded BeFS version: 0.9.3 OCFS2 1.5.0 ocfs2: Registered cluster interface o2cb ocfs2: Registered cluster interface user OCFS2 DLMFS 1.5.0 OCFS2 User DLM kernel interface loaded OCFS2 Node Manager 1.5.0 OCFS2 DLM 1.5.0 Btrfs loaded GFS2 (built Apr 15 2011 02:35:04) installed ceph: loaded (mds proto 32) msgmni has been set to 968 async_tx: api initialized (async) Block layer SCSI generic (bsg) driver version 0.4 loaded=20 (major 254) io scheduler noop registered io scheduler deadline registered io scheduler cfq registered (default) pci_hotplug: PCI Hot Plug PCI Core version: 0.5 cpqphp: Compaq Hot Plug PCI Controller Driver version:=20 0.9.8 ibmphpd: IBM Hot Plug PCI Controller Driver version: 0.6 pciehp: PCI Express Hot Plug Controller Driver version:=20 0.4 cpcihp_zt5550: ZT5550 CompactPCI Hot Plug Driver version:=20 0.2 cpcihp_generic: Generic port I/O CompactPCI Hot Plug=20 Driver version: 0.1 cpcihp_generic: not configured, disabling. shpchp: Standard Hot Plug PCI Controller Driver version:=20 0.4 acpiphp: ACPI Hot Plug PCI Controller Driver version: 0.5 acpiphp_ibm: ibm_acpiphp_init: acpi_walk_namespace failed Console: switching consoles 13-16 to MDA-2 nvidiafb 0000:01:00.0: power state changed by ACPI to D0 nvidiafb 0000:01:00.0: power state changed by ACPI to D0 ACPI: PCI Interrupt Link [LNKG] enabled at IRQ 10 PCI: setting IRQ 10 as level-triggered nvidiafb 0000:01:00.0: PCI INT A -> Link[LNKG] -> GSI 10=20 (level, low) -> IRQ 10 nvidiafb: Device ID: 10de0324 nvidiafb: CRTC0 analog not found nvidiafb: CRTC1 analog not found i2c i2c-0: unable to read EDID block. i2c i2c-0: unable to read EDID block. i2c i2c-0: unable to read EDID block. i2c i2c-1: unable to read EDID block. i2c i2c-1: unable to read EDID block. i2c i2c-1: unable to read EDID block. nvidiafb: CRTC 0 is currently programmed for DFP nvidiafb: Using DFP on CRTC 0 nvidiafb: Panel size is 1024 x 768 nvidiafb: Panel is LVDS nvidiafb: MTRR set to ON fbcvt: 1024x768@60: CVT Name - .786M3-R fbcon: NV32 (fb0) is primary device nvidiafb: Flat panel dithering disabled Console: switching to colour frame buffer device 128x48 nvidiafb: PCI nVidia NV32 framebuffer (64MB @ 0xA0000000) VIA Graphics Intergration Chipset framebuffer 2.4=20 initializing vmlfb: initializing Could not find Carillo Ranch MCH device. no IO addresses supplied hgafb: HGA card not detected. hgafb: probe of hgafb.0 failed with error -22 uvesafb: failed to execute /sbin/v86d uvesafb: make sure that the v86d helper is installed and=20 executable uvesafb: Getting VBE info block failed (eax=3D0x4f00,=20 err=3D-2) uvesafb: vbe_init() failed with -22 uvesafb: probe of uvesafb.0 failed with error -22 vesafb: cannot reserve video memory at 0xa0000000 vesafb: framebuffer at 0xa0000000, mapped to 0xe5c00000,=20 using 3072k, total 65536k vesafb: mode is 1024x768x16, linelength=3D2048, pages=3D1 vesafb: protected mode interface info at c000:c240 vesafb: pmi: set display start =3D c00cc276, set palette =3D=20 c00cc2e0 vesafb: pmi: ports =3D 3b4 3b5 3ba 3c0 3c1 3c4 3c5 3c6 3c7=20 3c8 3c9 3cc 3ce 3cf 3d0 3d1 3d2 3d3 3d4 3d5 3da vesafb: scrolling: redraw vesafb: Truecolor: size=3D0:5:6:5, shift=3D0:11:5:0 fb1: VESA VGA frame buffer device vga16fb: initializing vga16fb: mapped to 0xc00a0000 checking generic (a0000000 4000000) vs hw (a0000 10000) fb2: VGA16 VGA frame buffer device ACPI: Deprecated procfs I/F for AC is loaded, please retry=20 with CONFIG_ACPI_PROCFS_POWER cleared ACPI: AC Adapter [ADP1] (on-line) input: Power Button as=20 /devices/LNXSYSTM:00/device:00/PNP0C0C:00/input/input0 ACPI: Power Button [PWRB] input: Lid Switch as=20 /devices/LNXSYSTM:00/device:00/PNP0C0D:00/input/input1 ACPI: Lid Switch [LID] input: Power Button as=20 /devices/LNXSYSTM:00/LNXPWRBN:00/input/input2 ACPI: Power Button [PWRF] [Firmware Bug]: ACPI: No _BQC method, cannot determine=20 initial brightness acpi device:1a: registered as cooling_device0 input: Video Bus as=20 /devices/LNXSYSTM:00/device:00/PNP0A03:00/device:19/LNXVIDEO:00/input/i= nput3 ACPI: Video Device [VGA] (multi-head: yes rom: yes post:=20 no) ACPI: acpi_idle registered with cpuidle Marking TSC unstable due to TSC halts in idle thermal LNXTHERM:00: registered as thermal_zone0 ACPI: Thermal Zone [THRM] (80 C) ACPI: Deprecated procfs I/F for battery is loaded, please=20 retry with CONFIG_ACPI_PROCFS_POWER cleared ACPI: Battery Slot [BAT1] (battery present) ERST: Table is not found! isapnp: Scanning for PnP cards... isapnp: No Plug & Play device found Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled serial 0000:00:1f.6: power state changed by ACPI to D0 serial 0000:00:1f.6: power state changed by ACPI to D0 serial 0000:00:1f.6: enabling device (0000 -> 0001) ACPI: PCI Interrupt Link [LNKB] enabled at IRQ 11 serial 0000:00:1f.6: PCI INT B -> Link[LNKB] -> GSI 11=20 (level, low) -> IRQ 11 serial 0000:00:1f.6: PCI INT B disabled Non-volatile memory driver v1.3 Toshiba System Management Mode driver v1.11 26/9/2001 Linux agpgart interface v0.103 agpgart-intel 0000:00:00.0: Intel 855PM Chipset agpgart-intel 0000:00:00.0: AGP aperture is 256M @=20 0xb0000000 [drm] Initialized drm 1.1.0 20060810 [drm] radeon defaulting to userspace modesetting. =46loppy drive(s): fd0 is 1.44M floppy0: no floppy controllers found brd: module loaded loop: module loaded Compaq SMART2 Driver (v 2.6.0) HP CISS Driver (v 3.6.26) MM: desc_per_page =3D 128 nbd: registered device at major 43 usbcore: registered new interface driver ub drbd: initialized. Version: 8.3.9 (api:88/proto:86-95) drbd: built-in drbd: registered as block device major 147 drbd: minor_table @ 0xdf601f80 rbd: loaded rbd (rados block device) ibmasm: IBM ASM Service Processor Driver version 1.0=20 loaded tifm_7xx1 0000:02:0b.3: enabling device (0000 -> 0002) ACPI: PCI Interrupt Link [LNKD] enabled at IRQ 11 tifm_7xx1 0000:02:0b.3: PCI INT D -> Link[LNKD] -> GSI 11=20 (level, low) -> IRQ 11 Phantom Linux Driver, version n0.9.8, init OK i2c-core: driver [isl29003] using legacy suspend method i2c-core: driver [isl29003] using legacy resume method Silicon Labs C2 port support v. 0.51.0 - (C) 2007 Rodolfo=20 Giometti c2port c2port0: C2 port uc added c2port c2port0: uc flash has 30 blocks x 512 bytes (15360=20 bytes total) Driver for timberdale has been successfully registered. i2c-core: driver [adp5520] using legacy suspend method i2c-core: driver [adp5520] using legacy resume method Uniform Multi-Platform E-IDE driver piix 0000:00:1f.1: IDE controller (0x8086:0x24ca rev 0x03) ACPI: PCI Interrupt Link [LNKC] enabled at IRQ 11 PIIX_IDE 0000:00:1f.1: PCI INT A -> Link[LNKC] -> GSI 11=20 (level, low) -> IRQ 11 piix 0000:00:1f.1: not 100% native mode: will probe irqs=20 later ide0: BM-DMA at 0xbfa0-0xbfa7 ide1: BM-DMA at 0xbfa8-0xbfaf Probing IDE interface ide0... hda: TOSHIBA MK8032GAX, ATA DISK drive hda: host max PIO4 wanted PIO255(auto-tune) selected PIO4 hda: UDMA/100 mode selected Probing IDE interface ide1... hdc: MATSHITADVD-RAM UJ-830S, ATAPI CD/DVD-ROM drive hdc: host max PIO4 wanted PIO255(auto-tune) selected PIO4 hdc: UDMA/33 mode selected ide0 at 0x1f0-0x1f7,0x3f6 on irq 14 ide1 at 0x170-0x177,0x376 on irq 15 ide_generic: please use "probe_mask=3D0x3f" module parameter=20 for probing all legacy ISA IDE ports ide-gd driver 1.18 hda: max request size: 512KiB hda: 156301488 sectors (80026 MB), CHS=3D16383/255/63 hda: cache flushes supported hda: hda1 ide-cd driver 5.00 ide-cd: hdc: ATAPI 24X DVD-ROM DVD-R/RAM CD-R/RW drive,=20 2048kB Cache cdrom: Uniform CD-ROM driver Revision: 3.20 Loading iSCSI transport class v2.0-870. rdac: device handler registered hp_sw: device handler registered emc: device handler registered alua: device handler registered fnic: Cisco FCoE HBA Driver, ver 1.4.0.145 iscsi: registered transport (tcp) Loading Adaptec I2O RAID: Version 2.4 Build 5go Detecting Adaptec I2O RAID controllers... Adaptec aacraid driver 1.1-5[26400]-ms aic94xx: Adaptec aic94xx SAS/SATA driver version 1.0.3=20 loaded scsi: Detection failed (no card) NCR53c406a: no available ports found sym53c416.c: Version 1.0.0-ac qlogicfas: no cards were found, please specify I/O address=20 and IRQ using iobase=3D and irq=3D options QLogic Fibre Channel HBA Driver: 8.03.05-k0 iscsi: registered transport (qla4xxx) QLogic iSCSI HBA Driver Emulex LightPulse Fibre Channel SCSI driver 8.3.20 Copyright(c) 2004-2009 Emulex. All rights reserved. Brocade BFA FC/FCOE SCSI driver - version: 2.3.2.3 =46ailed initialization of WD-7000 SCSI card! DC390: clustering now enabled by default. If you get=20 problems load with "disable_clustering=3D1" and report to=20 maintainers megaraid cmm: 2.20.2.7 (Release Date: Sun Jul 16 00:01:03=20 EST 2006) megaraid: 2.20.5.1 (Release Date: Thu Nov 16 15:32:35 EST=20 2006) megasas: 00.00.05.29-rc1 Tue. Dec. 7 17:00:00 PDT 2010 mpt2sas version 07.100.00.00 loaded GDT-HA: Storage RAID Controller Driver. Version: 3.05 3ware Storage Controller device driver for Linux=20 v1.26.02.003. 3ware 9000 Storage Controller device driver for Linux=20 v2.26.02.014. ppa: Version 2.07 (for Linux 2.4.x) imm: Version 2.05 (for Linux 2.4.0) nsp32: loading... ipr: IBM Power RAID SCSI Device Driver version: 2.5.1=20 (August 10, 2010) RocketRAID 3xxx/4xxx Controller driver v1.6 (090910) stex: Promise SuperTrak EX Driver version: 4.6.0000.4 libcxgbi:libcxgbi_init_module: tag itt 0x1fff, 13 bits,=20 age 0xf, 4 bits. libcxgbi:ddp_setup_host_page_size: system PAGE 4096, ddp=20 idx 0. Chelsio T3 iSCSI Driver cxgb3i v2.0.0 (Jun. 2010) iscsi: registered transport (cxgb3i) Broadcom NetXtreme II iSCSI Driver bnx2i v2.6.2.2 (Nov 23,=20 2010) iscsi: registered transport (bnx2i) iscsi: registered transport (be2iscsi) st: Version 20101219, fixed bufsize 32768, s/g segs 256 osst :I: Tape driver with OnStream support version 0.99.4 osst :I: $Id: osst.c,v 1.73 2005/01/01 21:13:34 wriede Exp=20 $ SCSI Media Changer driver v0.25 osd: LOADED open-osd 0.2.0 Error: Driver 'pata_platform' is already registered,=20 aborting... SSFDC read-only Flash Translation layer mtdoops: mtd device (mtddev=3Dname/number) must be supplied L440GX flash mapping: failed to find PIIX4 ISA bridge,=20 cannot continue device id =3D 2440 device id =3D 2480 device id =3D 24c0 device id =3D 24d0 device id =3D 25a1 device id =3D 2670 physmap-flash.0: failed to claim resource 0 SBC-GXx flash: IO:0x258-0x259 MEM:0xdc000-0xdffff NetSc520 flash device: 0x100000 at 0x200000 =46ailed to ioremap_nocache =46ailed to ioremap_nocache scx200_docflash: NatSemi SCx200 DOCCS Flash Driver SNAPGEAR: failed to ioremap() ROMCS1 Generic platform RAM MTD, (c) 2004 Simtec Electronics Possible DiskOnChip with unknown ChipID 50 found at=20 0xfffe0000 No recognised DiskOnChip devices found slram: not enough parameters. Ramix PMC551 PCI Mezzanine Ram Driver. (C) 1999,2000=20 Nortel Networks. pmc551: not detected ftl_cs: FTL header not found. Spectra MTD driver built on Apr 15 2011 @ 03:05:21 No valid DiskOnChip devices found [nandsim] warning: read_byte: unexpected data output=20 cycle, state is STATE_READY return 0x0 [nandsim] warning: read_byte: unexpected data output=20 cycle, state is STATE_READY return 0x0 [nandsim] warning: read_byte: unexpected data output=20 cycle, state is STATE_READY return 0x0 [nandsim] warning: read_byte: unexpected data output=20 cycle, state is STATE_READY return 0x0 [nandsim] warning: read_byte: unexpected data output=20 cycle, state is STATE_READY return 0x0 [nandsim] warning: read_byte: unexpected data output=20 cycle, state is STATE_READY return 0x0 NAND device: Manufacturer ID: 0x98, Chip ID: 0x39 (Toshiba=20 NAND 8MiB 1,8V 8-bit) flash size: 8 MiB page size: 512 bytes OOB area size: 16 bytes sector size: 8 KiB pages number: 16384 pages per sector: 16 bus width: 8 bits in sector size: 13 bits in page size: 9 bits in OOB size: 4 flash size with OOB: 8448 KiB page address bytes: 3 sector address bytes: 2 options: 0x62 Scanning device for bad blocks Creating 1 MTD partitions on "NAND 8MiB 1,8V 8-bit": 0x000000000000-0x000000800000 : "NAND simulator partition=20 0" ftl_cs: FTL header not found. usbcore: registered new interface driver alauda onenand_wait: timeout! ctrl=3D0x0000 intr=3D0x0000 OneNAND Manufacturer: Samsung (0xec) OneNAND 16MB 1.8V 16-bit (0x04) OneNAND version =3D 0x001e Lock scheme is Continuous Lock Scanning device for bad blocks Creating 1 MTD partitions on "OneNAND simulator": 0x000000000000-0x000001000000 : "OneNAND simulator=20 partition" ftl_cs: FTL header not found. =46ixed MDIO Bus: probed Atheros(R) L2 Ethernet Driver - version 2.2.3 Copyright (c) 2007 Atheros Corporation. e100: Intel(R) PRO/100 Network Driver, 3.5.24-k2-NAPI e100: Copyright(c) 1999-2006 Intel Corporation ACPI: PCI Interrupt Link [LNKE] enabled at IRQ 11 e100 0000:02:08.0: PCI INT A -> Link[LNKE] -> GSI 11=20 (level, low) -> IRQ 11 e100 0000:02:08.0: PME# disabled e100 0000:02:08.0: eth0: addr 0xceefe000, irq 11, MAC addr=20 00:0e:7b:6b:67:0c cnic: Broadcom NetXtreme II CNIC Driver cnic v2.2.12 (Jan=20 03, 2011) D-Link DE-620 pocket adapter not identified in the printer=20 port PPP generic driver version 2.4.2 PPP Deflate Compression module registered PPP BSD Compression module registered PPP MPPE Compression module registered NET: Registered protocol family 24 SLIP: version 0.8.4-NET3.019-NEWTTY (dynamic channels,=20 max=3D256) (6 bit encapsulation enabled). CSLIP: code copyright 1989 Regents of the University of=20 California. SLIP linefill/keepalive option. eth%d: D-Link DE-600 pocket adapter: not at I/O 0x378. atp.c:v1.09=3Dac 2002/10/01 Donald Becker I2O subsystem v1.325 i2o: max drivers =3D 8 I2O Configuration OSM v1.323 I2O Bus Adapter OSM v1.317 I2O Block Device OSM v1.325 I2O SCSI Peripheral OSM v1.316 I2O ProcFS OSM v1.316 =46usion MPT base driver 3.04.18 Copyright (c) 1999-2008 LSI Corporation =46usion MPT SPI Host driver 3.04.18 =46usion MPT FC Host driver 3.04.18 =46usion MPT SAS Host driver 3.04.18 =46usion MPT misc device (ioctl) driver 3.04.18 mptctl: Registered with Fusion MPT base driver mptctl: /dev/mptctl @ (major,minor=3D10,220) =46usion MPT LAN driver 3.04.18 firewire_ohci 0000:02:0b.2: enabling device (0000 -> 0002) ACPI: PCI Interrupt Link [LNKF] enabled at IRQ 11 firewire_ohci 0000:02:0b.2: PCI INT C -> Link[LNKF] -> GSI=20 11 (level, low) -> IRQ 11 firewire_ohci: Added fw-ohci device 0000:02:0b.2, OHCI=20 v1.10, 4 IR + 8 IT contexts, quirks 0x2 yenta_cardbus 0000:02:0b.0: CardBus bridge found=20 [1179:0001] yenta_cardbus 0000:02:0b.0: Using CSCINT to route CSC=20 interrupts to PCI yenta_cardbus 0000:02:0b.0: Routing CardBus interrupts to=20 PCI yenta_cardbus 0000:02:0b.0: TI: mfunc 0x01aa1b02, devctl=20 0x64 yenta_cardbus 0000:02:0b.0: ISA IRQ mask 0x00f8, PCI irq=20 11 yenta_cardbus 0000:02:0b.0: Socket status: 30000086 yenta_cardbus 0000:02:0b.0: pcmcia: parent PCI bridge=20 window: [io 0xc000-0xcfff] pcmcia_socket pcmcia_socket0: cs: IO port probe=20 0xc000-0xcfff: excluding 0xc000-0xc0ff 0xc400-0xc4ff=20 0xcf00-0xcf3f yenta_cardbus 0000:02:0b.0: pcmcia: parent PCI bridge=20 window: [mem 0xcee00000-0xceefffff] pcmcia_socket pcmcia_socket0: cs: memory probe=20 0xcee00000-0xceefffff: excluding 0xcee00000-0xcee0ffff=20 0xceef0000-0xceefffff yenta_cardbus 0000:02:0b.0: pcmcia: parent PCI bridge=20 window: [mem 0x20000000-0x27ffffff pref] pcmcia_socket pcmcia_socket0: cs: memory probe=20 0x20000000-0x27ffffff: excluding 0x20000000-0x27ffffff Intel ISA PCIC probe: not found. Databook TCIC-2 PCMCIA probe: not found. aoe: AoE v47 initialised. paride: aten registered as protocol 0 paride: bpck registered as protocol 1 paride: comm registered as protocol 2 paride: dstr registered as protocol 3 paride: k951 registered as protocol 4 paride: k971 registered as protocol 5 paride: epat registered as protocol 6 paride: epia registered as protocol 7 paride: frpw registered as protocol 8 paride: friq registered as protocol 9 paride: fit2 registered as protocol 10 paride: fit3 registered as protocol 11 paride: on20 registered as protocol 12 paride: on26 registered as protocol 13 paride: ktti registered as protocol 14 bpck6: BACKPACK Protocol Driver V2.0.2 bpck6: Copyright 2001 by Micro Solutions, Inc., DeKalb IL.=20 USA paride: bpck6 registered as protocol 15 pd: pd version 1.05, major 45, cluster 64, nice 0 pda: Autoprobe failed pd: no valid drive found pcd: pcd version 1.07, major 46, nice 0 pcd0: Autoprobe failed pcd: No CD-ROM drive found pf: pf version 1.04, major 47, cluster 64, nice 0 pf: No ATAPI disk detected pt: pt version 1.04, major 96 pt0: Autoprobe failed pt: No ATAPI tape drive detected pg: pg version 1.02, major 97 pga: Autoprobe failed pg: No ATAPI device detected usbcore: registered new interface driver hwa-rc ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver ehci_hcd 0000:00:1d.7: enabling device (0000 -> 0002) ACPI: PCI Interrupt Link [LNKH] enabled at IRQ 11 ehci_hcd 0000:00:1d.7: PCI INT D -> Link[LNKH] -> GSI 11=20 (level, low) -> IRQ 11 ehci_hcd 0000:00:1d.7: setting latency timer to 64 ehci_hcd 0000:00:1d.7: EHCI Host Controller ehci_hcd 0000:00:1d.7: new USB bus registered, assigned=20 bus number 1 ehci_hcd 0000:00:1d.7: debug port 1 ehci_hcd 0000:00:1d.7: cache line size of 32 is not=20 supported ehci_hcd 0000:00:1d.7: irq 11, io mem 0x28000000 ehci_hcd 0000:00:1d.7: USB 2.0 started, EHCI 1.00 usb usb1: New USB device found, idVendor=3D1d6b,=20 idProduct=3D0002 usb usb1: New USB device strings: Mfr=3D3, Product=3D2,=20 SerialNumber=3D1 usb usb1: Product: EHCI Host Controller usb usb1: Manufacturer: Linux 2.6.38.3 ehci_hcd usb usb1: SerialNumber: 0000:00:1d.7 hub 1-0:1.0: USB hub found hub 1-0:1.0: 6 ports detected 116x: driver isp116x-hcd, 03 Nov 2005 driver isp1362-hcd, 2005-04-04 ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver uhci_hcd: USB Universal Host Controller Interface driver uhci_hcd 0000:00:1d.0: PCI INT A -> Link[LNKA] -> GSI 11=20 (level, low) -> IRQ 11 uhci_hcd 0000:00:1d.0: setting latency timer to 64 uhci_hcd 0000:00:1d.0: UHCI Host Controller uhci_hcd 0000:00:1d.0: new USB bus registered, assigned=20 bus number 2 uhci_hcd 0000:00:1d.0: irq 11, io base 0x000018c0 usb usb2: New USB device found, idVendor=3D1d6b,=20 idProduct=3D0001 usb usb2: New USB device strings: Mfr=3D3, Product=3D2,=20 SerialNumber=3D1 usb usb2: Product: UHCI Host Controller usb usb2: Manufacturer: Linux 2.6.38.3 uhci_hcd usb usb2: SerialNumber: 0000:00:1d.0 hub 2-0:1.0: USB hub found hub 2-0:1.0: 2 ports detected uhci_hcd 0000:00:1d.1: PCI INT B -> Link[LNKD] -> GSI 11=20 (level, low) -> IRQ 11 uhci_hcd 0000:00:1d.1: setting latency timer to 64 uhci_hcd 0000:00:1d.1: UHCI Host Controller uhci_hcd 0000:00:1d.1: new USB bus registered, assigned=20 bus number 3 uhci_hcd 0000:00:1d.1: irq 11, io base 0x000018e0 usb usb3: New USB device found, idVendor=3D1d6b,=20 idProduct=3D0001 usb usb3: New USB device strings: Mfr=3D3, Product=3D2,=20 SerialNumber=3D1 usb usb3: Product: UHCI Host Controller usb usb3: Manufacturer: Linux 2.6.38.3 uhci_hcd usb usb3: SerialNumber: 0000:00:1d.1 hub 3-0:1.0: USB hub found hub 3-0:1.0: 2 ports detected uhci_hcd 0000:00:1d.2: PCI INT C -> Link[LNKC] -> GSI 11=20 (level, low) -> IRQ 11 uhci_hcd 0000:00:1d.2: setting latency timer to 64 uhci_hcd 0000:00:1d.2: UHCI Host Controller uhci_hcd 0000:00:1d.2: new USB bus registered, assigned=20 bus number 4 uhci_hcd 0000:00:1d.2: irq 11, io base 0x00001c00 usb usb4: New USB device found, idVendor=3D1d6b,=20 idProduct=3D0001 usb usb4: New USB device strings: Mfr=3D3, Product=3D2,=20 SerialNumber=3D1 usb usb4: Product: UHCI Host Controller usb usb4: Manufacturer: Linux 2.6.38.3 uhci_hcd usb usb4: SerialNumber: 0000:00:1d.2 hub 4-0:1.0: USB hub found hub 4-0:1.0: 2 ports detected sl811: driver sl811-hcd, 19 May 2005 r8a66597_hcd: driver r8a66597_hcd, 2009-05-26 usbcore: registered new interface driver hwa-hc usbcore: registered new interface driver wusb-cbaf usbcore: registered new interface driver cdc_acm cdc_acm: v0.26:USB Abstract Control Model driver for USB=20 modems and ISDN adapters usbcore: registered new interface driver usblp usbcore: registered new interface driver cdc_wdm usbcore: registered new interface driver uas Initializing USB Mass Storage driver... usbcore: registered new interface driver usb-storage USB Mass Storage support registered. usbcore: registered new interface driver libusual usbcore: registered new interface driver ums-alauda usbcore: registered new interface driver ums-cypress usbcore: registered new interface driver ums-datafab usbcore: registered new interface driver ums-freecom usbcore: registered new interface driver ums-isd200 usbcore: registered new interface driver ums-jumpshot usbcore: registered new interface driver ums-karma usbcore: registered new interface driver ums-onetouch usbcore: registered new interface driver ums-sddr09 usbcore: registered new interface driver ums-sddr55 usbcore: registered new interface driver ums-usbat i8042: PNP: PS/2 Controller [PNP0303:KBC,PNP0f13:PS2M] at=20 0x60,0x64 irq 1,12 serio: i8042 KBD port at 0x60,0x64 irq 1 serio: i8042 AUX port at 0x60,0x64 irq 12 parkbd: no such parport mousedev: PS/2 mouse device common for all mice i2c-core: driver [lm8323] using legacy suspend method i2c-core: driver [lm8323] using legacy resume method i2c-core: driver [max7359] using legacy suspend method i2c-core: driver [max7359] using legacy resume method usbcore: registered new interface driver appletouch usbcore: registered new interface driver bcm5974 inport.c: Didn't find InPort mouse at 0x23c logibm.c: Didn't find Logitech busmouse at 0x23c i2c-core: driver [synaptics_i2c] using legacy suspend=20 method i2c-core: driver [synaptics_i2c] using legacy resume=20 method usbcore: registered new interface driver usb_acecad acecad: v3.2:USB Acecad Flair tablet driver usbcore: registered new interface driver aiptek aiptek: v2.3 (May 2, 2007):Aiptek HyperPen USB Tablet=20 Driver (Linux 2.6.x) aiptek: Bryan W. Headley/Chris Atenasio/Cedric Brun/Rene=20 van Paassen input: AT Translated Set 2 keyboard as=20 /devices/platform/i8042/serio0/input/input4 usbcore: registered new interface driver gtco GTCO usb driver version: 2.00.0006 usbcore: registered new interface driver hanwang usbcore: registered new interface driver kbtab kbtab: v0.0.2:USB KB Gear JamStudio Tablet driver usbcore: registered new interface driver wacom wacom: v1.52:USB Wacom tablet driver mk712: device not present usbcore: registered new interface driver usbtouchscreen i2c-core: driver [ad714x_captouch] using legacy suspend=20 method i2c-core: driver [ad714x_captouch] using legacy resume=20 method i2c-core: driver [adxl34x] using legacy suspend method i2c-core: driver [adxl34x] using legacy resume method apanel: Fujitsu BIOS signature 'FJKEYINF' not found... usbcore: registered new interface driver ati_remote ati_remote: 2.2.1:ATI/X10 RF USB Remote Control usbcore: registered new interface driver ati_remote2 ati_remote2: ATI/Philips USB RF remote driver 0.3 cm109: Keymap for Komunikate KIP1000 phone loaded usbcore: registered new interface driver cm109 cm109: CM109 phone driver: 20080805 (C) Alfred E.=20 Heggestad usbcore: registered new interface driver keyspan_remote input: PC Speaker as /devices/platform/pcspkr/input/input5 usbcore: registered new interface driver powermate wistron_btns: System unknown usbcore: registered new interface driver yealink yealink: yld-20051230:Yealink phone driver i2c /dev entries driver lirc_dev: IR Remote Control driver registered, major 242 IR NEC protocol handler initialized IR RC5(x) protocol handler initialized IR RC6 protocol handler initialized IR JVC protocol handler initialized IR Sony protocol handler initialized IR RC5 (streamzap) protocol handler initialized IR LIRC bridge handler initialized Linux video capture interface: v2.00 md: linear personality registered for level -1 md: raid0 personality registered for level 0 md: raid1 personality registered for level 1 md: raid10 personality registered for level 10 md: raid6 personality registered for level 6 md: raid5 personality registered for level 5 md: raid4 personality registered for level 4 md: multipath personality registered for level -4 md: faulty personality registered for level -5 device-mapper: uevent: version 1.0.3 device-mapper: ioctl: 4.19.1-ioctl (2011-01-07)=20 initialised: dm-devel@redhat.com device-mapper: multipath: version 1.2.0 loaded device-mapper: multipath round-robin: version 1.0.0 loaded EDAC MC: Ver: 2.1.0 Apr 15 2011 EISA: Probing bus 0 at eisa.0 Cannot allocate resource for EISA slot 1 EISA: Detected 0 cards. cpuidle: using governor ladder sdhci: Secure Digital Host Controller Interface driver sdhci: Copyright(c) Pierre Ossman sdhci-pci 0000:02:0b.4: SDHCI controller found [104c:8034]=20 (rev 0) sdhci-pci 0000:02:0b.4: enabling device (0000 -> 0002) sdhci-pci 0000:02:0b.4: PCI INT D -> Link[LNKD] -> GSI 11=20 (level, low) -> IRQ 11 _regulator_get: 0000:02:0b.4 supply vmmc not found, using=20 dummy regulator Registered led device: mmc0:: mmc0: SDHCI controller on PCI [0000:02:0b.4] using DMA _regulator_get: 0000:02:0b.4 supply vmmc not found, using=20 dummy regulator ------------[ cut here ]------------ WARNING: at fs/sysfs/dir.c:455 sysfs_add_one+0x83/0x95() Hardware name: Qosmio E10 sysfs: cannot create duplicate filename=20 '/devices/pci0000:00/0000:00:1e.0/0000:02:0b.4/microamps_requested_vmmc= ' Modules linked in: Pid: 1, comm: swapper Not tainted 2.6.38.3 #1 Call Trace: [] ? sysfs_add_one+0x83/0x95 [] ? warn_slowpath_common+0x7a/0x8f [] ? sysfs_add_one+0x83/0x95 [] ? warn_slowpath_fmt+0x33/0x35 [] ? sysfs_add_one+0x83/0x95 [] ? sysfs_add_file_mode+0x4a/0x72 [] ? sysfs_add_file+0x18/0x1c [] ? sysfs_create_file+0x25/0x27 [] ? device_create_file+0x18/0x1a [] ? _regulator_get+0x224/0x3b7 [] ? request_threaded_irq+0xb9/0xe5 [] ? regulator_get+0xf/0x11 [] ? sdhci_add_host+0x580/0x6cb [] ? pci_ioremap_bar+0x5b/0x5f [] ? sdhci_pci_probe+0x339/0x3e2 [] ? local_pci_probe+0x41/0x85 [] ? pci_device_probe+0x48/0x6b [] ? driver_probe_device+0x9c/0x145 [] ? pci_match_device+0x96/0x9c [] ? _cond_resched+0x8/0x47 [] ? __driver_attach+0x48/0x64 [] ? bus_for_each_dev+0x42/0x6c [] ? driver_attach+0x1e/0x20 [] ? __driver_attach+0x0/0x64 [] ? bus_add_driver+0xc6/0x20a [] ? driver_register+0x98/0xf8 [] ? driver_register+0x98/0xf8 [] ? tty_register_driver+0x15e/0x1e2 [] ? __pci_register_driver+0x3d/0x96 [] ? printk+0x1d/0x1f [] ? sdhci_drv_init+0x14/0x16 [] ? do_one_initcall+0x8c/0x142 [] ? irq_to_desc+0x8/0x1e [] ? sdhci_drv_init+0x0/0x16 [] ? kernel_init+0x101/0x19a [] ? kernel_init+0x0/0x19a [] ? kernel_thread_helper+0x6/0x10 ---[ end trace 120ecbe82d809816 ]--- create_regulator: dummy: could not add regulator_dev=20 requested microamps sysfs entry mmc1: no vmmc regulator found firewire_core: created device fw0: GUID 000039000061e892,=20 S400 Registered led device: mmc1:: mmc1: SDHCI controller on PCI [0000:02:0b.4] using DMA _regulator_get: 0000:02:0b.4 supply vmmc not found, using=20 dummy regulator ------------[ cut here ]------------ WARNING: at fs/sysfs/dir.c:455 sysfs_add_one+0x83/0x95() Hardware name: Qosmio E10 sysfs: cannot create duplicate filename=20 '/devices/pci0000:00/0000:00:1e.0/0000:02:0b.4/microamps_requested_vmmc= ' Modules linked in: Pid: 1, comm: swapper Tainted: G W 2.6.38.3 #1 Call Trace: [] ? sysfs_add_one+0x83/0x95 [] ? warn_slowpath_common+0x7a/0x8f [] ? sysfs_add_one+0x83/0x95 [] ? warn_slowpath_fmt+0x33/0x35 [] ? sysfs_add_one+0x83/0x95 [] ? sysfs_add_file_mode+0x4a/0x72 [] ? sysfs_add_file+0x18/0x1c [] ? sysfs_create_file+0x25/0x27 [] ? device_create_file+0x18/0x1a [] ? _regulator_get+0x224/0x3b7 [] ? request_threaded_irq+0xb9/0xe5 [] ? regulator_get+0xf/0x11 [] ? sdhci_add_host+0x580/0x6cb [] ? pci_ioremap_bar+0x5b/0x5f [] ? sdhci_pci_probe+0x339/0x3e2 [] ? local_pci_probe+0x41/0x85 [] ? pci_device_probe+0x48/0x6b [] ? driver_probe_device+0x9c/0x145 [] ? pci_match_device+0x96/0x9c [] ? _cond_resched+0x8/0x47 [] ? __driver_attach+0x48/0x64 [] ? bus_for_each_dev+0x42/0x6c [] ? driver_attach+0x1e/0x20 [] ? __driver_attach+0x0/0x64 [] ? bus_add_driver+0xc6/0x20a [] ? driver_register+0x98/0xf8 [] ? driver_register+0x98/0xf8 [] ? tty_register_driver+0x15e/0x1e2 [] ? __pci_register_driver+0x3d/0x96 [] ? printk+0x1d/0x1f [] ? sdhci_drv_init+0x14/0x16 [] ? do_one_initcall+0x8c/0x142 [] ? irq_to_desc+0x8/0x1e [] ? sdhci_drv_init+0x0/0x16 [] ? kernel_init+0x101/0x19a [] ? kernel_init+0x0/0x19a [] ? kernel_thread_helper+0x6/0x10 ---[ end trace 120ecbe82d809817 ]--- create_regulator: dummy: could not add regulator_dev=20 requested microamps sysfs entry mmc2: no vmmc regulator found Registered led device: mmc2:: mmc2: SDHCI controller on PCI [0000:02:0b.4] using DMA wbsd: Winbond W83L51xD SD/MMC card interface driver wbsd: Copyright(c) Pierre Ossman via_sdmmc: VIA SD/MMC Card Reader driver (C) 2008 VIA=20 Technologies, Inc. No iBFT detected. usbcore: registered new interface driver usbhid usbhid: USB HID core driver XGIfb: Options (null) dell-wmi: No known WMI GUID found This machine doesn't have MSI-hotkeys through WMI Topstar Laptop ACPI extras driver loaded Detected Toshiba ACPI Bluetooth device - installing RFKill=20 handler toshiba_bluetooth: Re-enabling Toshiba Bluetooth oprofile: using NMI timer interrupt. TCP cubic registered Initializing XFRM netlink socket NET: Registered protocol family 17 NET: Registered protocol family 33 lib80211: common routines for IEEE802.11 drivers lib80211_crypt: registered algorithm 'NULL' lib80211_crypt: registered algorithm 'WEP' lib80211_crypt: registered algorithm 'CCMP' lib80211_crypt: registered algorithm 'TKIP' Registering the dns_resolver key type libceph: loaded (mon/osd proto 15/24, osdmap 5/5 5/5) Using IPI No-Shortcut mode psmouse serio1: ID: 73 02 14 usb 3-1: new low speed USB device using uhci_hcd and=20 address 2 usb 3-1: New USB device found, idVendor=3D04d9,=20 idProduct=3D1603 usb 3-1: New USB device strings: Mfr=3D1, Product=3D2,=20 SerialNumber=3D0 usb 3-1: Product: USB Keyboard usb 3-1: Manufacturer: input: USB Keyboard as=20 /devices/pci0000:00/0000:00:1d.1/usb3/3-1/3-1:1.0/input/input6 generic-usb 0003:04D9:1603.0001: input,hidraw0: USB HID=20 v1.10 Keyboard [ USB Keyboard] on=20 usb-0000:00:1d.1-1/input0 input: USB Keyboard as=20 /devices/pci0000:00/0000:00:1d.1/usb3/3-1/3-1:1.1/input/input7 generic-usb 0003:04D9:1603.0002: input,hidraw1: USB HID=20 v1.10 Device [ USB Keyboard] on usb-0000:00:1d.1-1/input1 usb 3-2: new low speed USB device using uhci_hcd and=20 address 3 usb 3-2: New USB device found, idVendor=3D05e3,=20 idProduct=3D1205 usb 3-2: New USB device strings: Mfr=3D0, Product=3D1,=20 SerialNumber=3D0 usb 3-2: Product: USB Mouse input: USB Mouse as=20 /devices/pci0000:00/0000:00:1d.1/usb3/3-2/3-2:1.0/input/input8 generic-usb 0003:05E3:1205.0003: input,hidraw2: USB HID=20 v1.10 Mouse [USB Mouse ] on=20 usb-0000:00:1d.1-2/input0 input: PS/2 Generic Mouse as=20 /devices/platform/i8042/serio1/input/input9 kAFS: Red Hat AFS client v0.1 registering. =46S-Cache: Netfs 'afs' registered for caching raid6test: testing the 4-disk case... raid6test: test_disks(0, 1): faila=3D 0(D) failb=3D 1(D)=20 OK raid6test: test_disks(0, 2): faila=3D 0(D) failb=3D 2(P)=20 OK raid6test: test_disks(0, 3): faila=3D 0(D) failb=3D 3(Q)=20 OK raid6test: test_disks(1, 2): faila=3D 1(D) failb=3D 2(P)=20 OK raid6test: test_disks(1, 3): faila=3D 1(D) failb=3D 3(Q)=20 OK raid6test: test_disks(2, 3): faila=3D 2(P) failb=3D 3(Q)=20 OK raid6test: testing the 5-disk case... raid6test: test_disks(0, 1): faila=3D 0(D) failb=3D 1(D)=20 OK raid6test: test_disks(0, 2): faila=3D 0(D) failb=3D 2(D)=20 OK raid6test: test_disks(0, 3): faila=3D 0(D) failb=3D 3(P)=20 OK raid6test: test_disks(0, 4): faila=3D 0(D) failb=3D 4(Q)=20 OK raid6test: test_disks(1, 2): faila=3D 1(D) failb=3D 2(D)=20 OK raid6test: test_disks(1, 3): faila=3D 1(D) failb=3D 3(P)=20 OK raid6test: test_disks(1, 4): faila=3D 1(D) failb=3D 4(Q)=20 OK raid6test: test_disks(2, 3): faila=3D 2(D) failb=3D 3(P)=20 OK raid6test: test_disks(2, 4): faila=3D 2(D) failb=3D 4(Q)=20 OK raid6test: test_disks(3, 4): faila=3D 3(P) failb=3D 4(Q)=20 OK raid6test: testing the 11-disk case... raid6test: test_disks(0, 1): faila=3D 0(D) failb=3D 1(D)=20 OK raid6test: test_disks(0, 2): faila=3D 0(D) failb=3D 2(D)=20 OK raid6test: test_disks(0, 3): faila=3D 0(D) failb=3D 3(D)=20 OK raid6test: test_disks(0, 4): faila=3D 0(D) failb=3D 4(D)=20 OK raid6test: test_disks(0, 5): faila=3D 0(D) failb=3D 5(D)=20 OK raid6test: test_disks(0, 6): faila=3D 0(D) failb=3D 6(D)=20 OK raid6test: test_disks(0, 7): faila=3D 0(D) failb=3D 7(D)=20 OK raid6test: test_disks(0, 8): faila=3D 0(D) failb=3D 8(D)=20 OK raid6test: test_disks(0, 9): faila=3D 0(D) failb=3D 9(P)=20 OK raid6test: test_disks(0, 10): faila=3D 0(D) failb=3D 10(Q)=20 OK raid6test: test_disks(1, 2): faila=3D 1(D) failb=3D 2(D)=20 OK raid6test: test_disks(1, 3): faila=3D 1(D) failb=3D 3(D)=20 OK raid6test: test_disks(1, 4): faila=3D 1(D) failb=3D 4(D)=20 OK raid6test: test_disks(1, 5): faila=3D 1(D) failb=3D 5(D)=20 OK raid6test: test_disks(1, 6): faila=3D 1(D) failb=3D 6(D)=20 OK raid6test: test_disks(1, 7): faila=3D 1(D) failb=3D 7(D)=20 OK raid6test: test_disks(1, 8): faila=3D 1(D) failb=3D 8(D)=20 OK raid6test: test_disks(1, 9): faila=3D 1(D) failb=3D 9(P)=20 OK raid6test: test_disks(1, 10): faila=3D 1(D) failb=3D 10(Q)=20 OK raid6test: test_disks(2, 3): faila=3D 2(D) failb=3D 3(D)=20 OK raid6test: test_disks(2, 4): faila=3D 2(D) failb=3D 4(D)=20 OK raid6test: test_disks(2, 5): faila=3D 2(D) failb=3D 5(D)=20 OK raid6test: test_disks(2, 6): faila=3D 2(D) failb=3D 6(D)=20 OK raid6test: test_disks(2, 7): faila=3D 2(D) failb=3D 7(D)=20 OK raid6test: test_disks(2, 8): faila=3D 2(D) failb=3D 8(D)=20 OK raid6test: test_disks(2, 9): faila=3D 2(D) failb=3D 9(P)=20 OK raid6test: test_disks(2, 10): faila=3D 2(D) failb=3D 10(Q)=20 OK raid6test: test_disks(3, 4): faila=3D 3(D) failb=3D 4(D)=20 OK raid6test: test_disks(3, 5): faila=3D 3(D) failb=3D 5(D)=20 OK raid6test: test_disks(3, 6): faila=3D 3(D) failb=3D 6(D)=20 OK raid6test: test_disks(3, 7): faila=3D 3(D) failb=3D 7(D)=20 OK raid6test: test_disks(3, 8): faila=3D 3(D) failb=3D 8(D)=20 OK raid6test: test_disks(3, 9): faila=3D 3(D) failb=3D 9(P)=20 OK raid6test: test_disks(3, 10): faila=3D 3(D) failb=3D 10(Q)=20 OK raid6test: test_disks(4, 5): faila=3D 4(D) failb=3D 5(D)=20 OK raid6test: test_disks(4, 6): faila=3D 4(D) failb=3D 6(D)=20 OK raid6test: test_disks(4, 7): faila=3D 4(D) failb=3D 7(D)=20 OK raid6test: test_disks(4, 8): faila=3D 4(D) failb=3D 8(D)=20 OK raid6test: test_disks(4, 9): faila=3D 4(D) failb=3D 9(P)=20 OK raid6test: test_disks(4, 10): faila=3D 4(D) failb=3D 10(Q)=20 OK raid6test: test_disks(5, 6): faila=3D 5(D) failb=3D 6(D)=20 OK raid6test: test_disks(5, 7): faila=3D 5(D) failb=3D 7(D)=20 OK raid6test: test_disks(5, 8): faila=3D 5(D) failb=3D 8(D)=20 OK raid6test: test_disks(5, 9): faila=3D 5(D) failb=3D 9(P)=20 OK raid6test: test_disks(5, 10): faila=3D 5(D) failb=3D 10(Q)=20 OK raid6test: test_disks(6, 7): faila=3D 6(D) failb=3D 7(D)=20 OK raid6test: test_disks(6, 8): faila=3D 6(D) failb=3D 8(D)=20 OK raid6test: test_disks(6, 9): faila=3D 6(D) failb=3D 9(P)=20 OK raid6test: test_disks(6, 10): faila=3D 6(D) failb=3D 10(Q)=20 OK raid6test: test_disks(7, 8): faila=3D 7(D) failb=3D 8(D)=20 OK raid6test: test_disks(7, 9): faila=3D 7(D) failb=3D 9(P)=20 OK raid6test: test_disks(7, 10): faila=3D 7(D) failb=3D 10(Q)=20 OK raid6test: test_disks(8, 9): faila=3D 8(D) failb=3D 9(P)=20 OK raid6test: test_disks(8, 10): faila=3D 8(D) failb=3D 10(Q)=20 OK raid6test: test_disks(9, 10): faila=3D 9(P) failb=3D 10(Q)=20 OK raid6test: testing the 12-disk case... raid6test: test_disks(0, 1): faila=3D 0(D) failb=3D 1(D)=20 OK raid6test: test_disks(0, 2): faila=3D 0(D) failb=3D 2(D)=20 OK raid6test: test_disks(0, 3): faila=3D 0(D) failb=3D 3(D)=20 OK raid6test: test_disks(0, 4): faila=3D 0(D) failb=3D 4(D)=20 OK raid6test: test_disks(0, 5): faila=3D 0(D) failb=3D 5(D)=20 OK raid6test: test_disks(0, 6): faila=3D 0(D) failb=3D 6(D)=20 OK raid6test: test_disks(0, 7): faila=3D 0(D) failb=3D 7(D)=20 OK raid6test: test_disks(0, 8): faila=3D 0(D) failb=3D 8(D)=20 OK raid6test: test_disks(0, 9): faila=3D 0(D) failb=3D 9(D)=20 OK raid6test: test_disks(0, 10): faila=3D 0(D) failb=3D 10(P)=20 OK raid6test: test_disks(0, 11): faila=3D 0(D) failb=3D 11(Q)=20 OK raid6test: test_disks(1, 2): faila=3D 1(D) failb=3D 2(D)=20 OK raid6test: test_disks(1, 3): faila=3D 1(D) failb=3D 3(D)=20 OK raid6test: test_disks(1, 4): faila=3D 1(D) failb=3D 4(D)=20 OK raid6test: test_disks(1, 5): faila=3D 1(D) failb=3D 5(D)=20 OK raid6test: test_disks(1, 6): faila=3D 1(D) failb=3D 6(D)=20 OK raid6test: test_disks(1, 7): faila=3D 1(D) failb=3D 7(D)=20 OK raid6test: test_disks(1, 8): faila=3D 1(D) failb=3D 8(D)=20 OK raid6test: test_disks(1, 9): faila=3D 1(D) failb=3D 9(D)=20 OK raid6test: test_disks(1, 10): faila=3D 1(D) failb=3D 10(P)=20 OK raid6test: test_disks(1, 11): faila=3D 1(D) failb=3D 11(Q)=20 OK raid6test: test_disks(2, 3): faila=3D 2(D) failb=3D 3(D)=20 OK raid6test: test_disks(2, 4): faila=3D 2(D) failb=3D 4(D)=20 OK raid6test: test_disks(2, 5): faila=3D 2(D) failb=3D 5(D)=20 OK raid6test: test_disks(2, 6): faila=3D 2(D) failb=3D 6(D)=20 OK raid6test: test_disks(2, 7): faila=3D 2(D) failb=3D 7(D)=20 OK raid6test: test_disks(2, 8): faila=3D 2(D) failb=3D 8(D)=20 OK raid6test: test_disks(2, 9): faila=3D 2(D) failb=3D 9(D)=20 OK raid6test: test_disks(2, 10): faila=3D 2(D) failb=3D 10(P)=20 OK raid6test: test_disks(2, 11): faila=3D 2(D) failb=3D 11(Q)=20 OK raid6test: test_disks(3, 4): faila=3D 3(D) failb=3D 4(D)=20 OK raid6test: test_disks(3, 5): faila=3D 3(D) failb=3D 5(D)=20 OK raid6test: test_disks(3, 6): faila=3D 3(D) failb=3D 6(D)=20 OK raid6test: test_disks(3, 7): faila=3D 3(D) failb=3D 7(D)=20 OK raid6test: test_disks(3, 8): faila=3D 3(D) failb=3D 8(D)=20 OK raid6test: test_disks(3, 9): faila=3D 3(D) failb=3D 9(D)=20 OK raid6test: test_disks(3, 10): faila=3D 3(D) failb=3D 10(P)=20 OK raid6test: test_disks(3, 11): faila=3D 3(D) failb=3D 11(Q)=20 OK raid6test: test_disks(4, 5): faila=3D 4(D) failb=3D 5(D)=20 OK raid6test: test_disks(4, 6): faila=3D 4(D) failb=3D 6(D)=20 OK raid6test: test_disks(4, 7): faila=3D 4(D) failb=3D 7(D)=20 OK raid6test: test_disks(4, 8): faila=3D 4(D) failb=3D 8(D)=20 OK raid6test: test_disks(4, 9): faila=3D 4(D) failb=3D 9(D)=20 OK raid6test: test_disks(4, 10): faila=3D 4(D) failb=3D 10(P)=20 OK raid6test: test_disks(4, 11): faila=3D 4(D) failb=3D 11(Q)=20 OK raid6test: test_disks(5, 6): faila=3D 5(D) failb=3D 6(D)=20 OK raid6test: test_disks(5, 7): faila=3D 5(D) failb=3D 7(D)=20 OK raid6test: test_disks(5, 8): faila=3D 5(D) failb=3D 8(D)=20 OK raid6test: test_disks(5, 9): faila=3D 5(D) failb=3D 9(D)=20 OK raid6test: test_disks(5, 10): faila=3D 5(D) failb=3D 10(P)=20 OK raid6test: test_disks(5, 11): faila=3D 5(D) failb=3D 11(Q)=20 OK raid6test: test_disks(6, 7): faila=3D 6(D) failb=3D 7(D)=20 OK raid6test: test_disks(6, 8): faila=3D 6(D) failb=3D 8(D)=20 OK raid6test: test_disks(6, 9): faila=3D 6(D) failb=3D 9(D)=20 OK raid6test: test_disks(6, 10): faila=3D 6(D) failb=3D 10(P)=20 OK raid6test: test_disks(6, 11): faila=3D 6(D) failb=3D 11(Q)=20 OK raid6test: test_disks(7, 8): faila=3D 7(D) failb=3D 8(D)=20 OK raid6test: test_disks(7, 9): faila=3D 7(D) failb=3D 9(D)=20 OK raid6test: test_disks(7, 10): faila=3D 7(D) failb=3D 10(P)=20 OK raid6test: test_disks(7, 11): faila=3D 7(D) failb=3D 11(Q)=20 OK raid6test: test_disks(8, 9): faila=3D 8(D) failb=3D 9(D)=20 OK raid6test: test_disks(8, 10): faila=3D 8(D) failb=3D 10(P)=20 OK raid6test: test_disks(8, 11): faila=3D 8(D) failb=3D 11(Q)=20 OK raid6test: test_disks(9, 10): faila=3D 9(D) failb=3D 10(P)=20 OK raid6test: test_disks(9, 11): faila=3D 9(D) failb=3D 11(Q)=20 OK raid6test: test_disks(10, 11): faila=3D 10(P) failb=3D 11(Q)=20 OK raid6test: testing the 16-disk case... raid6test: test_disks(0, 1): faila=3D 0(D) failb=3D 1(D)=20 OK raid6test: test_disks(0, 2): faila=3D 0(D) failb=3D 2(D)=20 OK raid6test: test_disks(0, 3): faila=3D 0(D) failb=3D 3(D)=20 OK raid6test: test_disks(0, 4): faila=3D 0(D) failb=3D 4(D)=20 OK raid6test: test_disks(0, 5): faila=3D 0(D) failb=3D 5(D)=20 OK raid6test: test_disks(0, 6): faila=3D 0(D) failb=3D 6(D)=20 OK raid6test: test_disks(0, 7): faila=3D 0(D) failb=3D 7(D)=20 OK raid6test: test_disks(0, 8): faila=3D 0(D) failb=3D 8(D)=20 OK raid6test: test_disks(0, 9): faila=3D 0(D) failb=3D 9(D)=20 OK raid6test: test_disks(0, 10): faila=3D 0(D) failb=3D 10(D)=20 OK raid6test: test_disks(0, 11): faila=3D 0(D) failb=3D 11(D)=20 OK raid6test: test_disks(0, 12): faila=3D 0(D) failb=3D 12(D)=20 OK raid6test: test_disks(0, 13): faila=3D 0(D) failb=3D 13(D)=20 OK raid6test: test_disks(0, 14): faila=3D 0(D) failb=3D 14(P)=20 OK raid6test: test_disks(0, 15): faila=3D 0(D) failb=3D 15(Q)=20 OK raid6test: test_disks(1, 2): faila=3D 1(D) failb=3D 2(D)=20 OK raid6test: test_disks(1, 3): faila=3D 1(D) failb=3D 3(D)=20 OK raid6test: test_disks(1, 4): faila=3D 1(D) failb=3D 4(D)=20 OK raid6test: test_disks(1, 5): faila=3D 1(D) failb=3D 5(D)=20 OK raid6test: test_disks(1, 6): faila=3D 1(D) failb=3D 6(D)=20 OK raid6test: test_disks(1, 7): faila=3D 1(D) failb=3D 7(D)=20 OK raid6test: test_disks(1, 8): faila=3D 1(D) failb=3D 8(D)=20 OK raid6test: test_disks(1, 9): faila=3D 1(D) failb=3D 9(D)=20 OK raid6test: test_disks(1, 10): faila=3D 1(D) failb=3D 10(D)=20 OK raid6test: test_disks(1, 11): faila=3D 1(D) failb=3D 11(D)=20 OK raid6test: test_disks(1, 12): faila=3D 1(D) failb=3D 12(D)=20 OK raid6test: test_disks(1, 13): faila=3D 1(D) failb=3D 13(D)=20 OK raid6test: test_disks(1, 14): faila=3D 1(D) failb=3D 14(P)=20 OK raid6test: test_disks(1, 15): faila=3D 1(D) failb=3D 15(Q)=20 OK raid6test: test_disks(2, 3): faila=3D 2(D) failb=3D 3(D)=20 OK raid6test: test_disks(2, 4): faila=3D 2(D) failb=3D 4(D)=20 OK raid6test: test_disks(2, 5): faila=3D 2(D) failb=3D 5(D)=20 OK raid6test: test_disks(2, 6): faila=3D 2(D) failb=3D 6(D)=20 OK raid6test: test_disks(2, 7): faila=3D 2(D) failb=3D 7(D)=20 OK raid6test: test_disks(2, 8): faila=3D 2(D) failb=3D 8(D)=20 OK raid6test: test_disks(2, 9): faila=3D 2(D) failb=3D 9(D)=20 OK raid6test: test_disks(2, 10): faila=3D 2(D) failb=3D 10(D)=20 OK raid6test: test_disks(2, 11): faila=3D 2(D) failb=3D 11(D)=20 OK raid6test: test_disks(2, 12): faila=3D 2(D) failb=3D 12(D)=20 OK raid6test: test_disks(2, 13): faila=3D 2(D) failb=3D 13(D)=20 OK raid6test: test_disks(2, 14): faila=3D 2(D) failb=3D 14(P)=20 OK raid6test: test_disks(2, 15): faila=3D 2(D) failb=3D 15(Q)=20 OK raid6test: test_disks(3, 4): faila=3D 3(D) failb=3D 4(D)=20 OK raid6test: test_disks(3, 5): faila=3D 3(D) failb=3D 5(D)=20 OK raid6test: test_disks(3, 6): faila=3D 3(D) failb=3D 6(D)=20 OK raid6test: test_disks(3, 7): faila=3D 3(D) failb=3D 7(D)=20 OK raid6test: test_disks(3, 8): faila=3D 3(D) failb=3D 8(D)=20 OK raid6test: test_disks(3, 9): faila=3D 3(D) failb=3D 9(D)=20 OK raid6test: test_disks(3, 10): faila=3D 3(D) failb=3D 10(D)=20 OK raid6test: test_disks(3, 11): faila=3D 3(D) failb=3D 11(D)=20 OK raid6test: test_disks(3, 12): faila=3D 3(D) failb=3D 12(D)=20 OK raid6test: test_disks(3, 13): faila=3D 3(D) failb=3D 13(D)=20 OK raid6test: test_disks(3, 14): faila=3D 3(D) failb=3D 14(P)=20 OK raid6test: test_disks(3, 15): faila=3D 3(D) failb=3D 15(Q)=20 OK raid6test: test_disks(4, 5): faila=3D 4(D) failb=3D 5(D)=20 OK raid6test: test_disks(4, 6): faila=3D 4(D) failb=3D 6(D)=20 OK raid6test: test_disks(4, 7): faila=3D 4(D) failb=3D 7(D)=20 OK raid6test: test_disks(4, 8): faila=3D 4(D) failb=3D 8(D)=20 OK raid6test: test_disks(4, 9): faila=3D 4(D) failb=3D 9(D)=20 OK raid6test: test_disks(4, 10): faila=3D 4(D) failb=3D 10(D)=20 OK raid6test: test_disks(4, 11): faila=3D 4(D) failb=3D 11(D)=20 OK raid6test: test_disks(4, 12): faila=3D 4(D) failb=3D 12(D)=20 OK raid6test: test_disks(4, 13): faila=3D 4(D) failb=3D 13(D)=20 OK raid6test: test_disks(4, 14): faila=3D 4(D) failb=3D 14(P)=20 OK raid6test: test_disks(4, 15): faila=3D 4(D) failb=3D 15(Q)=20 OK raid6test: test_disks(5, 6): faila=3D 5(D) failb=3D 6(D)=20 OK raid6test: test_disks(5, 7): faila=3D 5(D) failb=3D 7(D)=20 OK raid6test: test_disks(5, 8): faila=3D 5(D) failb=3D 8(D)=20 OK raid6test: test_disks(5, 9): faila=3D 5(D) failb=3D 9(D)=20 OK raid6test: test_disks(5, 10): faila=3D 5(D) failb=3D 10(D)=20 OK raid6test: test_disks(5, 11): faila=3D 5(D) failb=3D 11(D)=20 OK raid6test: test_disks(5, 12): faila=3D 5(D) failb=3D 12(D)=20 OK raid6test: test_disks(5, 13): faila=3D 5(D) failb=3D 13(D)=20 OK raid6test: test_disks(5, 14): faila=3D 5(D) failb=3D 14(P)=20 OK raid6test: test_disks(5, 15): faila=3D 5(D) failb=3D 15(Q)=20 OK raid6test: test_disks(6, 7): faila=3D 6(D) failb=3D 7(D)=20 OK raid6test: test_disks(6, 8): faila=3D 6(D) failb=3D 8(D)=20 OK raid6test: test_disks(6, 9): faila=3D 6(D) failb=3D 9(D)=20 OK raid6test: test_disks(6, 10): faila=3D 6(D) failb=3D 10(D)=20 OK raid6test: test_disks(6, 11): faila=3D 6(D) failb=3D 11(D)=20 OK raid6test: test_disks(6, 12): faila=3D 6(D) failb=3D 12(D)=20 OK raid6test: test_disks(6, 13): faila=3D 6(D) failb=3D 13(D)=20 OK raid6test: test_disks(6, 14): faila=3D 6(D) failb=3D 14(P)=20 OK raid6test: test_disks(6, 15): faila=3D 6(D) failb=3D 15(Q)=20 OK raid6test: test_disks(7, 8): faila=3D 7(D) failb=3D 8(D)=20 OK raid6test: test_disks(7, 9): faila=3D 7(D) failb=3D 9(D)=20 OK raid6test: test_disks(7, 10): faila=3D 7(D) failb=3D 10(D)=20 OK raid6test: test_disks(7, 11): faila=3D 7(D) failb=3D 11(D)=20 OK raid6test: test_disks(7, 12): faila=3D 7(D) failb=3D 12(D)=20 OK raid6test: test_disks(7, 13): faila=3D 7(D) failb=3D 13(D)=20 OK raid6test: test_disks(7, 14): faila=3D 7(D) failb=3D 14(P)=20 OK raid6test: test_disks(7, 15): faila=3D 7(D) failb=3D 15(Q)=20 OK raid6test: test_disks(8, 9): faila=3D 8(D) failb=3D 9(D)=20 OK raid6test: test_disks(8, 10): faila=3D 8(D) failb=3D 10(D)=20 OK raid6test: test_disks(8, 11): faila=3D 8(D) failb=3D 11(D)=20 OK raid6test: test_disks(8, 12): faila=3D 8(D) failb=3D 12(D)=20 OK raid6test: test_disks(8, 13): faila=3D 8(D) failb=3D 13(D)=20 OK raid6test: test_disks(8, 14): faila=3D 8(D) failb=3D 14(P)=20 OK raid6test: test_disks(8, 15): faila=3D 8(D) failb=3D 15(Q)=20 OK raid6test: test_disks(9, 10): faila=3D 9(D) failb=3D 10(D)=20 OK raid6test: test_disks(9, 11): faila=3D 9(D) failb=3D 11(D)=20 OK raid6test: test_disks(9, 12): faila=3D 9(D) failb=3D 12(D)=20 OK raid6test: test_disks(9, 13): faila=3D 9(D) failb=3D 13(D)=20 OK raid6test: test_disks(9, 14): faila=3D 9(D) failb=3D 14(P)=20 OK raid6test: test_disks(9, 15): faila=3D 9(D) failb=3D 15(Q)=20 OK raid6test: test_disks(10, 11): faila=3D 10(D) failb=3D 11(D)=20 OK raid6test: test_disks(10, 12): faila=3D 10(D) failb=3D 12(D)=20 OK raid6test: test_disks(10, 13): faila=3D 10(D) failb=3D 13(D)=20 OK raid6test: test_disks(10, 14): faila=3D 10(D) failb=3D 14(P)=20 OK raid6test: test_disks(10, 15): faila=3D 10(D) failb=3D 15(Q)=20 OK raid6test: test_disks(11, 12): faila=3D 11(D) failb=3D 12(D)=20 OK raid6test: test_disks(11, 13): faila=3D 11(D) failb=3D 13(D)=20 OK raid6test: test_disks(11, 14): faila=3D 11(D) failb=3D 14(P)=20 OK raid6test: test_disks(11, 15): faila=3D 11(D) failb=3D 15(Q)=20 OK raid6test: test_disks(12, 13): faila=3D 12(D) failb=3D 13(D)=20 OK raid6test: test_disks(12, 14): faila=3D 12(D) failb=3D 14(P)=20 OK raid6test: test_disks(12, 15): faila=3D 12(D) failb=3D 15(Q)=20 OK raid6test: test_disks(13, 14): faila=3D 13(D) failb=3D 14(P)=20 OK raid6test: test_disks(13, 15): faila=3D 13(D) failb=3D 15(Q)=20 OK raid6test: test_disks(14, 15): faila=3D 14(P) failb=3D 15(Q)=20 OK raid6test: raid6test: complete (257 tests, 0 failures) BIOS EDD facility v0.16 2004-Jun-25, 1 devices found md: Waiting for all devices to be available before=20 autodetect md: If you don't use raid, use raid=3Dnoautodetect md: Autodetecting RAID arrays. md: Scanned 0 and added 0 devices. md: autorun ... md: ... autorun DONE. EXT3-fs: barriers not enabled kjournald starting. Commit interval 5 seconds EXT3-fs (hda1): mounted filesystem with ordered data mode VFS: Mounted root (ext3 filesystem) readonly on device=20 3:1. devtmpfs: mounted =46reeing unused kernel memory: 916k freed firewire_net: firewire0: IPv4 over FireWire on device=20 000039000061e892 firewire_core: refreshed device fw0 udevd (3479): /proc/3479/oom_adj is deprecated, please use=20 /proc/3479/oom_score_adj instead. intel_rng: FWH not detected iTCO_vendor_support: vendor-support=3D0 iTCO_wdt: Intel TCO WatchDog Timer Driver v1.06 iTCO_wdt: Found a ICH4-M TCO device (Version=3D1,=20 TCOBASE=3D0xd860) iTCO_wdt: initialized. heartbeat=3D30 sec (nowayout=3D0) input: Toshiba input device as=20 /devices/virtual/input/input10 toshiba_acpi: Toshiba Laptop ACPI Extras version 0.19 toshiba_acpi: HCI method: \_SB_.VALZ.GHCI Registered led device: toshiba::illumination usb 4-2: new full speed USB device using uhci_hcd and=20 address 2 Intel ICH 0000:00:1f.5: power state changed by ACPI to D0 Intel ICH 0000:00:1f.5: power state changed by ACPI to D0 Intel ICH 0000:00:1f.5: enabling device (0000 -> 0003) rtc_cmos 00:07: RTC can wake from S4 rtc_cmos 00:07: rtc core: registered rtc_cmos as rtc0 Intel ICH 0000:00:1f.5: PCI INT B -> Link[LNKB] -> GSI 11=20 (level, low) -> IRQ 11 Intel ICH 0000:00:1f.5: setting latency timer to 64 rtc0: alarms up to one year, 114 bytes nvram usb 4-2: New USB device found, idVendor=3D0930,=20 idProduct=3D0505 usb 4-2: New USB device strings: Mfr=3D0, Product=3D0,=20 SerialNumber=3D0 ivtv: Start initialization, version 1.4.2 ivtv0: Initializing card 0 ivtv0: Unknown card: vendor/device: [4444:0016] ivtv0: subsystem vendor/device: [1179:0001] ivtv0: cx23416 based ivtv0: Defaulting to Hauppauge WinTV PVR-150 card ivtv0: Please mail the vendor/device and subsystem=20 vendor/device IDs and what kind of ivtv0: card you have to the ivtv-devel mailinglist=20 (www.ivtvdriver.org) ivtv0: Prefix your subject line with [UNKNOWN IVTV CARD]. cfg80211: Calling CRDA to update world regulatory domain ivtv 0000:02:09.0: enabling device (0000 -> 0002) ivtv 0000:02:09.0: PCI INT A -> Link[LNKD] -> GSI 11=20 (level, low) -> IRQ 11 intel8x0_measure_ac97_clock: measured 50539 usecs (2436=20 samples) intel8x0: clocking to 48000 tveeprom 3-0050: Huh, no eeprom present (err=3D-6)? tveeprom 3-0050: Encountered bad packet header [c8].=20 Corrupt or not a Hauppauge eeprom. ivtv0: Invalid EEPROM libipw: 802.11 data/management/control stack, git-1.1.13 libipw: Copyright (C) 2004-2005 Intel Corporation=20 pcmcia_socket pcmcia_socket0: cs: IO port probe=20 0xc00-0xcff: excluding 0xcf8-0xcff pcmcia_socket pcmcia_socket0: cs: IO port probe=20 0x820-0x8ff: clean. pcmcia_socket pcmcia_socket0: cs: IO port probe=20 0x800-0x80f: clean. pcmcia_socket pcmcia_socket0: cs: IO port probe=20 0x3e0-0x4ff: excluding 0x3f0-0x3f7 0x480-0x48f 0x4d0-0x4d7 pcmcia_socket pcmcia_socket0: cs: IO port probe=20 0x100-0x3af: excluding 0x170-0x177 0x1e0-0x1f7 0x320-0x327=20 0x350-0x357 0x370-0x377 pcmcia_socket pcmcia_socket0: cs: memory probe=20 0x0c0000-0x0fffff: excluding 0xc0000-0xcffff=20 0xe0000-0xfffff pcmcia_socket pcmcia_socket0: cs: memory probe=20 0x60000000-0x60ffffff: clean. pcmcia_socket pcmcia_socket0: cs: memory probe=20 0xa0000000-0xa0ffffff: excluding 0xa0000000-0xa0ffffff pcmcia_socket pcmcia_socket0: cs: IO port probe=20 0xa00-0xaff: clean. ipw2200: Intel(R) PRO/Wireless 2200/2915 Network Driver,=20 1.2.2kmprq ipw2200: Copyright(c) 2003-2006 Intel Corporation cx25840 3-0044: Unable to detect h/w, assuming cx23887 cx25840 3-0044: cx23887 A/V decoder found @ 0x88 (ivtv i2c=20 driver #0) i2c-core: driver [tuner] using legacy suspend method i2c-core: driver [tuner] using legacy resume method Bluetooth: Core ver 2.15 NET: Registered protocol family 31 Bluetooth: HCI device and connection manager initialized Bluetooth: HCI socket layer initialized Bluetooth: Generic Bluetooth USB driver ver 0.6 usbcore: registered new interface driver btusb Chip ID is not zero. It is not a TEA5767 tuner 3-0060: chip found @ 0xc0 (ivtv i2c driver #0) wm8775 3-001b: chip found @ 0x36 (ivtv i2c driver #0) wm8775 3-001b: I2C: cannot write 000 to register R23 wm8775 3-001b: I2C: cannot write 000 to register R7 wm8775 3-001b: I2C: cannot write 021 to register R11 wm8775 3-001b: I2C: cannot write 102 to register R12 wm8775 3-001b: I2C: cannot write 000 to register R13 wm8775 3-001b: I2C: cannot write 1d4 to register R14 wm8775 3-001b: I2C: cannot write 1d4 to register R15 wm8775 3-001b: I2C: cannot write 1bf to register R16 wm8775 3-001b: I2C: cannot write 185 to register R17 wm8775 3-001b: I2C: cannot write 0a2 to register R18 wm8775 3-001b: I2C: cannot write 005 to register R19 wm8775 3-001b: I2C: cannot write 07a to register R20 wm8775 3-001b: I2C: cannot write 102 to register R21 ivtv0: Registered device video0 for encoder MPG (4096 kB) ivtv0: Registered device video32 for encoder YUV (2048 kB) ivtv0: Registered device vbi0 for encoder VBI (1024 kB) ivtv0: Registered device video24 for encoder PCM (320 kB) ivtv0: Registered device radio0 for encoder radio ivtv0: Initialized card: Hauppauge WinTV PVR-150 ipw2200 0000:02:05.0: PCI INT A -> Link[LNKA] -> GSI 11=20 (level, low) -> IRQ 11 ivtv: End initialization ipw2200: Detected Intel PRO/Wireless 2200BG Network=20 Connection ipw2200: Detected geography ZZM (11 802.11bg channels, 0=20 802.11a channels) EXT3-fs (hda1): using internal journal lp: driver loaded but no devices found usbcore: registered new interface driver uvcvideo USB Video Class driver (v1.0.0) usbcore: registered new interface driver snd-usb-audio Broadcom 43xx driver loaded [ Features: PMNLS,=20 =46irmware-ID: FW13 ] Broadcom 43xx-legacy driver loaded [ Features: PLID,=20 =46irmware-ID: FW10 ] rt2860sta: module is from the staging directory, the=20 quality is unknown, you have been warned. --- Professional hosting for everyone - http://www.host.ru -- To unsubscribe from this list: send the line "unsubscribe linux-scsi" i= n the body of a message to majordomo@vger.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html