From mboxrd@z Thu Jan 1 00:00:00 1970 From: Marc Zyngier Date: Fri, 04 Aug 2006 21:46:41 +0000 Subject: Re: serial console broken on Ultra 5 Message-Id: List-Id: References: In-Reply-To: MIME-Version: 1.0 Content-Type: text/plain; charset="us-ascii" Content-Transfer-Encoding: 7bit To: sparclinux@vger.kernel.org >>>>> "Daniel" = Daniel Smolik writes: Daniel> se@14,400000: ttyS0 at MMIO 0x1fff1400000 (irq = 7) is a SAB82532 V3.2 ^^^^^ Daniel> Console: ttyS2 (SAB82532) ^^^^^ Daniel> SUNSAB baud:115200 quot:0 Ok, I managed to reproduce it on my own setup. Looks like the kernel insists on having the first serial port as a console, even if it know is has to be the third... Of course, as ttyS2 has not been probed yet, it all goes to Nowhereland... I'll try to cook up a patch during the week-end if the weather is bad enough. In the meantime, you should be able to boot with "console=ttyS0 -p". At least, you'll have your console messages on the RSC console, and you'll probably be able to remote login. M. -- And if you don't know where you're going, any road will take you there...