From: "Gabor Z. Papp" <gzp@papp.hu>
To: linux-kernel@vger.kernel.org, linux-aacraid-devel@dell.com
Subject: 2.4 and aacraid dmesg
Date: Tue, 21 Jun 2005 19:45:04 +0200 [thread overview]
Message-ID: <x64qbrvc2n@gzp> (raw)
Is this
PCI: Found IRQ 4 for device 03:0d.0
PCI: Sharing IRQ 4 with 03:09.0
repeated kernel message okay for so many times?
Linux version 2.4.31 (root@gzp) (gcc version 3.4.3) #1 Tue Jun 7 18:53:06 CEST 2005
[...]
SCSI subsystem driver Revision: 1.00
Red Hat/Adaptec aacraid driver (1.1-3 Jun 7 2005 18:53:28)
PCI: Found IRQ 4 for device 03:0d.0
PCI: Sharing IRQ 4 with 03:09.0
AAC0: kernel 4.2.4 build 7349
AAC0: monitor 4.2.4 build 7349
AAC0: bios 4.2.0 build 7349
AAC0: serial bad0fafaf001
AAC0: Non-DASD support enabled
spurious 8259A interrupt: IRQ7.
PCI: Found IRQ 4 for device 03:0d.0
PCI: Sharing IRQ 4 with 03:09.0
PCI: Found IRQ 4 for device 03:0d.0
PCI: Sharing IRQ 4 with 03:09.0
PCI: Found IRQ 4 for device 03:0d.0
PCI: Sharing IRQ 4 with 03:09.0
PCI: Found IRQ 4 for device 03:0d.0
PCI: Sharing IRQ 4 with 03:09.0
PCI: Found IRQ 4 for device 03:0d.0
PCI: Sharing IRQ 4 with 03:09.0
PCI: Found IRQ 4 for device 03:0d.0
PCI: Sharing IRQ 4 with 03:09.0
PCI: Found IRQ 4 for device 03:0d.0
PCI: Sharing IRQ 4 with 03:09.0
PCI: Found IRQ 4 for device 03:0d.0
PCI: Sharing IRQ 4 with 03:09.0
PCI: Found IRQ 4 for device 03:0d.0
PCI: Sharing IRQ 4 with 03:09.0
PCI: Found IRQ 4 for device 03:0d.0
PCI: Sharing IRQ 4 with 03:09.0
PCI: Found IRQ 4 for device 03:0d.0
PCI: Sharing IRQ 4 with 03:09.0
PCI: Found IRQ 4 for device 03:0d.0
PCI: Sharing IRQ 4 with 03:09.0
PCI: Found IRQ 4 for device 03:0d.0
PCI: Sharing IRQ 4 with 03:09.0
PCI: Found IRQ 4 for device 03:0d.0
PCI: Sharing IRQ 4 with 03:09.0
PCI: Found IRQ 4 for device 03:0d.0
PCI: Sharing IRQ 4 with 03:09.0
PCI: Found IRQ 4 for device 03:0d.0
PCI: Sharing IRQ 4 with 03:09.0
PCI: Found IRQ 4 for device 03:0d.0
PCI: Sharing IRQ 4 with 03:09.0
PCI: Found IRQ 4 for device 03:0d.0
PCI: Sharing IRQ 4 with 03:09.0
scsi0 : aacraid
Vendor: ADAPTEC Model: Adaptec Mirror Rev: V1.0
Type: Direct-Access ANSI SCSI revision: 02
lspci not very informative about the card:
03:0d.0 RAID bus controller: Adaptec AAC-RAID (rev 01)
Its an Adaptec 2120S pci raid controller.
next reply other threads:[~2005-06-21 17:47 UTC|newest]
Thread overview: 6+ messages / expand[flat|nested] mbox.gz Atom feed top
2005-06-21 17:45 Gabor Z. Papp [this message]
-- strict thread matches above, loose matches on Subject: below --
2005-06-22 12:20 [Fwd: 2.4 and aacraid dmesg] Salyzyn, Mark
2005-06-22 15:25 ` 2.4 and aacraid dmesg Gabor Z. Papp
2005-06-22 15:25 ` Gabor Z. Papp
2005-06-22 15:43 Salyzyn, Mark
2005-06-22 15:43 ` Salyzyn, Mark
2005-06-22 15:59 ` Gabor Z. Papp
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=x64qbrvc2n@gzp \
--to=gzp@papp.hu \
--cc=linux-aacraid-devel@dell.com \
--cc=linux-kernel@vger.kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.