From: Junio C Hamano <gitster@pobox.com>
To: Phillip Wood <phillip.wood123@gmail.com>
Cc: git@vger.kernel.org,
Johannes Schindelin <johannes.schindelin@gmx.de>,
"Randall S. Becker" <rsbecker@nexbridge.com>
Subject: [PATCH v2] unit-tests: do show relative file paths on non-Windows, too
Date: Sun, 11 Feb 2024 07:58:04 -0800 [thread overview]
Message-ID: <xmqqle7r9enn.fsf_-_@gitster.g> (raw)
In-Reply-To: <6872b42d-8763-44dc-9502-2362d1ed80a7@gmail.com> (Phillip Wood's message of "Sun, 11 Feb 2024 11:03:55 +0000")
>
> We know which separator we're expecting so we could replace the last
> two comparisons with
>
> prefix[prefix_len -1] != needle[1]
>
> but as I say I'm not sure that is worth re-rolling for
There is a larger clean-up opportunity to drop the need for making a
copy, which probably is worth doing, so I folded the above into this
version.
------- >8 ------------- >8 ------------- >8 ------------- >8 -------
There are compilers other than Visual C that want to show absolute
paths. Generalize the helper introduced by a2c5e294 (unit-tests: do
show relative file paths, 2023-09-25) so that it can also work with
a path that uses slash as the directory separator, and becomes
almost no-op once one-time preparation finds out that we are using a
compiler that already gives relative paths. Incidentally, this also
should do the right thing on Windows with a compiler that shows
relative paths but with backslash as the directory separator (if
such a thing exists and is used to build git).
Reported-by: Randall S. Becker <rsbecker@nexbridge.com>
Helped-by: Phillip Wood <phillip.wood@dunelm.org.uk>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
---
* I found that the diff relative to the result of applying v1 was
easier to follow than the range-diff, so here it is.
diff --git c/t/unit-tests/test-lib.c w/t/unit-tests/test-lib.c
index 83c9eb8c59..66d6980ffb 100644
--- c/t/unit-tests/test-lib.c
+++ w/t/unit-tests/test-lib.c
@@ -64,34 +64,33 @@ static const char *make_relative(const char *location)
* prefix_len == 0 if the compiler gives paths relative
* to the root of the working tree. Otherwise, we want
* to see that we did find the needle[] at a directory
- * boundary.
+ * boundary. Again we rely on that needle[] begins with
+ * "t" followed by the directory separator.
*/
if (fspathcmp(needle, prefix + prefix_len) ||
- (prefix_len &&
- prefix[prefix_len - 1] != '/' &&
- prefix[prefix_len - 1] != '\\'))
+ (prefix_len && prefix[prefix_len - 1] != needle[1]))
die("unexpected suffix of '%s'", prefix);
-
}
/*
- * If our compiler gives relative paths and we do not need
- * to munge directory separator, we can return location as-is.
+ * Does it not start with the expected prefix?
+ * Return it as-is without making it worse.
*/
- if (!prefix_len && !need_bs_to_fs)
+ if (prefix_len && fspathncmp(location, prefix, prefix_len))
return location;
- /* Does it not start with the expected prefix? */
- if (fspathncmp(location, prefix, prefix_len))
- return location;
+ /*
+ * If we do not need to munge directory separator, we can return
+ * the substring at the tail of the location.
+ */
+ if (!need_bs_to_fs)
+ return location + prefix_len;
- strlcpy(buf, location + prefix_len, sizeof(buf));
/* convert backslashes to forward slashes */
- if (need_bs_to_fs) {
- for (p = buf; *p; p++)
- if (*p == '\\')
- *p = '/';
- }
+ strlcpy(buf, location + prefix_len, sizeof(buf));
+ for (p = buf; *p; p++)
+ if (*p == '\\')
+ *p = '/';
return buf;
}
t/unit-tests/test-lib.c | 61 +++++++++++++++++++++++++++++++----------
1 file changed, 47 insertions(+), 14 deletions(-)
diff --git a/t/unit-tests/test-lib.c b/t/unit-tests/test-lib.c
index 7bf9dfdb95..66d6980ffb 100644
--- a/t/unit-tests/test-lib.c
+++ b/t/unit-tests/test-lib.c
@@ -21,12 +21,11 @@ static struct {
.result = RESULT_NONE,
};
-#ifndef _MSC_VER
-#define make_relative(location) location
-#else
/*
* Visual C interpolates the absolute Windows path for `__FILE__`,
* but we want to see relative paths, as verified by t0080.
+ * There are other compilers that do the same, and are not for
+ * Windows.
*/
#include "dir.h"
@@ -34,32 +33,66 @@ static const char *make_relative(const char *location)
{
static char prefix[] = __FILE__, buf[PATH_MAX], *p;
static size_t prefix_len;
+ static int need_bs_to_fs = -1;
- if (!prefix_len) {
+ /* one-time preparation */
+ if (need_bs_to_fs < 0) {
size_t len = strlen(prefix);
- const char *needle = "\\t\\unit-tests\\test-lib.c";
+ char needle[] = "t\\unit-tests\\test-lib.c";
size_t needle_len = strlen(needle);
- if (len < needle_len || strcmp(needle, prefix + len - needle_len))
- die("unexpected suffix of '%s'", prefix);
+ if (len < needle_len)
+ die("unexpected prefix '%s'", prefix);
+
+ /*
+ * The path could be relative (t/unit-tests/test-lib.c)
+ * or full (/home/user/git/t/unit-tests/test-lib.c).
+ * Check the slash between "t" and "unit-tests".
+ */
+ prefix_len = len - needle_len;
+ if (prefix[prefix_len + 1] == '/') {
+ /* Oh, we're not Windows */
+ for (size_t i = 0; i < needle_len; i++)
+ if (needle[i] == '\\')
+ needle[i] = '/';
+ need_bs_to_fs = 0;
+ } else {
+ need_bs_to_fs = 1;
+ }
- /* let it end in a directory separator */
- prefix_len = len - needle_len + 1;
+ /*
+ * prefix_len == 0 if the compiler gives paths relative
+ * to the root of the working tree. Otherwise, we want
+ * to see that we did find the needle[] at a directory
+ * boundary. Again we rely on that needle[] begins with
+ * "t" followed by the directory separator.
+ */
+ if (fspathcmp(needle, prefix + prefix_len) ||
+ (prefix_len && prefix[prefix_len - 1] != needle[1]))
+ die("unexpected suffix of '%s'", prefix);
}
- /* Does it not start with the expected prefix? */
- if (fspathncmp(location, prefix, prefix_len))
+ /*
+ * Does it not start with the expected prefix?
+ * Return it as-is without making it worse.
+ */
+ if (prefix_len && fspathncmp(location, prefix, prefix_len))
return location;
- strlcpy(buf, location + prefix_len, sizeof(buf));
+ /*
+ * If we do not need to munge directory separator, we can return
+ * the substring at the tail of the location.
+ */
+ if (!need_bs_to_fs)
+ return location + prefix_len;
+
/* convert backslashes to forward slashes */
+ strlcpy(buf, location + prefix_len, sizeof(buf));
for (p = buf; *p; p++)
if (*p == '\\')
*p = '/';
-
return buf;
}
-#endif
static void msg_with_prefix(const char *prefix, const char *format, va_list ap)
{
--
2.44.0-rc0
next prev parent reply other threads:[~2024-02-11 15:58 UTC|newest]
Thread overview: 9+ messages / expand[flat|nested] mbox.gz Atom feed top
2024-02-11 8:57 [PATCH] unit-tests: do show relative file paths on non-Windows, too Junio C Hamano
2024-02-11 11:03 ` Phillip Wood
2024-02-11 15:58 ` Junio C Hamano [this message]
2024-02-12 10:44 ` [PATCH v2] " Phillip Wood
2024-02-12 22:41 ` Junio C Hamano
2024-02-13 10:55 ` Phillip Wood
2024-02-13 17:10 ` Junio C Hamano
2024-02-13 19:58 ` Johannes Schindelin
2024-02-13 20:48 ` Junio C Hamano
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=xmqqle7r9enn.fsf_-_@gitster.g \
--to=gitster@pobox.com \
--cc=git@vger.kernel.org \
--cc=johannes.schindelin@gmx.de \
--cc=phillip.wood123@gmail.com \
--cc=rsbecker@nexbridge.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.