All of lore.kernel.org
 help / color / mirror / Atom feed
From: Mikko Perttunen <mperttunen@nvidia.com>
To: thierry.reding@kernel.org, jonathanh@nvidia.com,
	Aniruddha Rao <anrao@nvidia.com>
Cc: linux-tegra@vger.kernel.org, linux-kernel@vger.kernel.org,
	Aniruddha Rao <anrao@nvidia.com>
Subject: Re: [PATCH v2 2/5] firmware: tegra: bpmp: Add ACPI support
Date: Thu, 23 Jul 2026 14:10:23 +0900	[thread overview]
Message-ID: <yp4_Hg6NTM6XvmUccLSv1w@nvidia.com> (raw)
In-Reply-To: <20260722110544.193551-3-anrao@nvidia.com>

On Wednesday, July 22, 2026 8:05 PM Aniruddha Rao wrote:
> Add required changes in the Tegra BPMP driver to make it compatible with
> ACPI based platforms.
> 
> On ACPI systems, IPC is handled through the AML method instead of
> the core kernel framework using mailboxes and IVC.
> 
> Bypass clock, reset and powergate init calls as these are not
> controlled by the Linux drivers on ACPI based systems.
> 
> Signed-off-by: Aniruddha Rao <anrao@nvidia.com>
> ---
> Changes since v1:
> - Use acpi_extract_package() and a common cleanup path for BMRQ replies.
> - Treat short BMRQ responses as errors.
> - Rename the mailbox transport helper to __tegra_bpmp_transfer().
> - Avoid a dummy ACPI ops table and call SoC ops only when present.
> - Keep OF resource setup guarded by the OF node in probe.
> 
>  drivers/firmware/tegra/bpmp.c | 221 ++++++++++++++++++++++++++++------
>  1 file changed, 182 insertions(+), 39 deletions(-)
> 
> diff --git a/drivers/firmware/tegra/bpmp.c b/drivers/firmware/tegra/bpmp.c
> index 0eb99b1c5068..2dcb74a45b59 100644
> --- a/drivers/firmware/tegra/bpmp.c
> +++ b/drivers/firmware/tegra/bpmp.c
> @@ -3,6 +3,7 @@
>   * Copyright (c) 2016, NVIDIA CORPORATION.  All rights reserved.
>   */
>  
> +#include <linux/acpi.h>
>  #include <linux/clk/tegra.h>
>  #include <linux/genalloc.h>
>  #include <linux/mailbox_client.h>
> @@ -11,8 +12,10 @@
>  #include <linux/of_platform.h>
>  #include <linux/platform_device.h>
>  #include <linux/pm.h>
> +#include <linux/property.h>
>  #include <linux/semaphore.h>
>  #include <linux/sched/clock.h>
> +#include <linux/slab.h>
>  
>  #include <soc/tegra/bpmp.h>
>  #include <soc/tegra/bpmp-abi.h>
> @@ -23,6 +26,12 @@
>  #define MSG_ACK		BIT(0)
>  #define MSG_RING	BIT(1)
>  #define TAG_SZ		32
> +#define TEGRA_BPMP_ACPI_BMRQ_DATA_SZ	3960U
> +
> +struct tegra_bpmp_acpi_message {
> +	u64 status;
> +	u8 *data;
> +};
>  
>  static inline const struct tegra_bpmp_ops *
>  channel_to_ops(struct tegra_bpmp_channel *channel)
> @@ -343,12 +352,99 @@ static ssize_t tegra_bpmp_channel_write(struct tegra_bpmp_channel *channel,
>  
>  static int __maybe_unused tegra_bpmp_resume(struct device *dev);
>  
> +#ifdef CONFIG_ACPI
> +static int tegra_bpmp_transfer_acpi(struct tegra_bpmp *bpmp,
> +				    struct tegra_bpmp_message *msg)
> +{
> +	struct acpi_buffer output = { ACPI_ALLOCATE_BUFFER, NULL };
> +	struct acpi_buffer response = { ACPI_ALLOCATE_BUFFER, NULL };
> +	struct acpi_buffer format = { sizeof("NB"), "NB" };
> +	struct acpi_object_list param_list;
> +	union acpi_object params[2];
> +	struct tegra_bpmp_acpi_message *reply;
> +	acpi_status status;
> +	size_t data_len;
> +	int err = 0;
> +
> +	if (!tegra_bpmp_message_valid(msg))
> +		return -EINVAL;
> +
> +	params[0].type = ACPI_TYPE_INTEGER;
> +	params[0].integer.value = msg->mrq;
> +
> +	params[1].type = ACPI_TYPE_BUFFER;
> +	params[1].buffer.length = msg->tx.size;
> +	params[1].buffer.pointer = (u8 *)msg->tx.data;
> +
> +	param_list.count = 2;
> +	param_list.pointer = params;
> +
> +	status = acpi_evaluate_object(ACPI_HANDLE(bpmp->dev), "BMRQ",
> +				      &param_list, &output);
> +	if (ACPI_FAILURE(status)) {
> +		acpi_evaluation_failure_warn(ACPI_HANDLE(bpmp->dev), "BMRQ",
> +					     status);
> +		return -ENODEV;
> +	}
> +
> +	status = acpi_extract_package(output.pointer, &format, &response);
> +	if (ACPI_FAILURE(status)) {
> +		dev_err(bpmp->dev, "BMRQ: invalid response package: %s\n",
> +			acpi_format_exception(status));
> +		err = -ENODATA;
> +		goto out;
> +	}
> +
> +	if (response.length < sizeof(*reply)) {
> +		dev_err(bpmp->dev, "BMRQ: response too short\n");
> +		err = -ENODATA;
> +		goto out;
> +	}
> +
> +	reply = response.pointer;
> +	data_len = response.length - sizeof(*reply);
> +	if (data_len > TEGRA_BPMP_ACPI_BMRQ_DATA_SZ) {
> +		dev_err(bpmp->dev, "BMRQ: reply buffer too large (%zu)\n",
> +			data_len);
> +		err = -EINVAL;
> +		goto out;
> +	}
> +
> +	msg->rx.ret = (int)reply->status;
> +
> +	if (msg->rx.data && msg->rx.size) {
> +		if (data_len < msg->rx.size) {
> +			dev_err(bpmp->dev, "BMRQ: response data too short\n");
> +			err = -ENODATA;
> +			goto out;
> +		}
> +
> +		memcpy(msg->rx.data, reply->data, msg->rx.size);
> +	}
> +
> +out:
> +	kfree(response.pointer);
> +	kfree(output.pointer);
> +
> +	return err;
> +}
> +#else
> +static int tegra_bpmp_transfer_acpi(struct tegra_bpmp *bpmp,
> +				    struct tegra_bpmp_message *msg)
> +{
> +	return -EOPNOTSUPP;
> +}
> +#endif
> +
>  int tegra_bpmp_transfer_atomic(struct tegra_bpmp *bpmp,
>  			       struct tegra_bpmp_message *msg)
>  {
>  	struct tegra_bpmp_channel *channel;
>  	int err;
>  
> +	if (WARN_ON(ACPI_HANDLE(bpmp->dev)))
> +		return -EOPNOTSUPP;
> +
>  	if (WARN_ON(!irqs_disabled()))
>  		return -EPERM;
>  
> @@ -389,16 +485,13 @@ int tegra_bpmp_transfer_atomic(struct tegra_bpmp *bpmp,
>  }
>  EXPORT_SYMBOL_GPL(tegra_bpmp_transfer_atomic);
>  
> -int tegra_bpmp_transfer(struct tegra_bpmp *bpmp,
> -			struct tegra_bpmp_message *msg)
> +static int __tegra_bpmp_transfer(struct tegra_bpmp *bpmp,
> +				 struct tegra_bpmp_message *msg)
>  {
>  	struct tegra_bpmp_channel *channel;
>  	unsigned long timeout;
>  	int err;
>  
> -	if (WARN_ON(irqs_disabled()))
> -		return -EPERM;
> -
>  	if (!tegra_bpmp_message_valid(msg))
>  		return -EINVAL;
>  
> @@ -428,6 +521,18 @@ int tegra_bpmp_transfer(struct tegra_bpmp *bpmp,
>  	return tegra_bpmp_channel_read(channel, msg->rx.data, msg->rx.size,
>  				       &msg->rx.ret);
>  }
> +
> +int tegra_bpmp_transfer(struct tegra_bpmp *bpmp,
> +			struct tegra_bpmp_message *msg)
> +{
> +	if (WARN_ON(irqs_disabled()))
> +		return -EPERM;
> +
> +	if (ACPI_HANDLE(bpmp->dev))
> +		return tegra_bpmp_transfer_acpi(bpmp, msg);
> +
> +	return __tegra_bpmp_transfer(bpmp, msg);
> +}

Having separate __tegra_bpmp_transfer and tegra_bpmp_transfer seems 
unnecessary to me. I think we can just have tegra_bpmp_transfer call 
tegra_bpmp_transfer_acpi after the tegra_bpmp_message_valid check?

>  EXPORT_SYMBOL_GPL(tegra_bpmp_transfer);
>  
>  static struct tegra_bpmp_mrq *tegra_bpmp_find_mrq(struct tegra_bpmp *bpmp,
> @@ -606,11 +711,17 @@ static int tegra_bpmp_ping(struct tegra_bpmp *bpmp)
>  	msg.rx.data = &response;
>  	msg.rx.size = sizeof(response);
>  
> -	local_irq_save(flags);
>  	start = ktime_get();
> -	err = tegra_bpmp_transfer_atomic(bpmp, &msg);
> +
> +	if (ACPI_HANDLE(bpmp->dev)) {
> +		err = tegra_bpmp_transfer(bpmp, &msg);
> +	} else {
> +		local_irq_save(flags);
> +		err = tegra_bpmp_transfer_atomic(bpmp, &msg);
> +		local_irq_restore(flags);
> +	}
> +
>  	end = ktime_get();
> -	local_irq_restore(flags);
>  
>  	if (!err)
>  		dev_dbg(bpmp->dev,
> @@ -632,6 +743,9 @@ static int tegra_bpmp_get_firmware_tag_old(struct tegra_bpmp *bpmp, char *tag,
>  	void *virt;
>  	int err;
>  
> +	if (ACPI_HANDLE(bpmp->dev))
> +		return -EOPNOTSUPP;
> +
>  	if (size != TAG_SZ)
>  		return -EINVAL;
>  
> @@ -783,23 +897,32 @@ static int tegra_bpmp_probe(struct platform_device *pdev)
>  	if (!bpmp)
>  		return -ENOMEM;
>  
> -	bpmp->soc = of_device_get_match_data(&pdev->dev);
> -	bpmp->dev = &pdev->dev;
> +	bpmp->soc = device_get_match_data(&pdev->dev);
> +	if (!bpmp->soc)
> +		return -EINVAL;
>  
> -	err = tegra_bpmp_init_channels(bpmp);
> -	if (err < 0)
> -		return err;
> +	bpmp->dev = &pdev->dev;
>  
>  	platform_set_drvdata(pdev, bpmp);
>  
> -	err = bpmp->soc->ops->init(bpmp);
> -	if (err < 0)
> -		return err;
> +	if (!ACPI_HANDLE(bpmp->dev)) {
> +		err = tegra_bpmp_init_channels(bpmp);
> +		if (err < 0)
> +			return err;
> +	}
>  
> -	err = tegra_bpmp_request_mrq(bpmp, MRQ_PING,
> -				     tegra_bpmp_mrq_handle_ping, bpmp);
> -	if (err < 0)
> -		goto deinit;
> +	if (bpmp->soc->ops && bpmp->soc->ops->init) {
> +		err = bpmp->soc->ops->init(bpmp);
> +		if (err < 0)
> +			return err;
> +	}
> +
> +	if (!ACPI_HANDLE(bpmp->dev)) {
> +		err = tegra_bpmp_request_mrq(bpmp, MRQ_PING,
> +					     tegra_bpmp_mrq_handle_ping, bpmp);
> +		if (err < 0)
> +			goto deinit;
> +	}
>  
>  	err = tegra_bpmp_ping(bpmp);
>  	if (err < 0) {
> @@ -815,26 +938,30 @@ static int tegra_bpmp_probe(struct platform_device *pdev)
>  
>  	dev_info(&pdev->dev, "firmware: %.*s\n", (int)sizeof(tag), tag);
>  
> -	err = of_platform_default_populate(pdev->dev.of_node, NULL, &pdev->dev);
> -	if (err < 0)
> -		goto free_mrq;
> -
> -	if (of_property_present(pdev->dev.of_node, "#clock-cells")) {
> -		err = tegra_bpmp_init_clocks(bpmp);
> +	if (pdev->dev.of_node) {
> +		err = of_platform_default_populate(pdev->dev.of_node, NULL,
> +						   &pdev->dev);
>  		if (err < 0)
>  			goto free_mrq;
> -	}
>  
> -	if (of_property_present(pdev->dev.of_node, "#reset-cells")) {
> -		err = tegra_bpmp_init_resets(bpmp);
> -		if (err < 0)
> -			goto free_mrq;
> -	}
> +		if (of_property_present(pdev->dev.of_node, "#clock-cells")) {
> +			err = tegra_bpmp_init_clocks(bpmp);
> +			if (err < 0)
> +				goto free_mrq;
> +		}
>  
> -	if (of_property_present(pdev->dev.of_node, "#power-domain-cells")) {
> -		err = tegra_bpmp_init_powergates(bpmp);
> -		if (err < 0)
> -			goto free_mrq;
> +		if (of_property_present(pdev->dev.of_node, "#reset-cells")) {
> +			err = tegra_bpmp_init_resets(bpmp);
> +			if (err < 0)
> +				goto free_mrq;
> +		}
> +
> +		if (of_property_present(pdev->dev.of_node,
> +					"#power-domain-cells")) {
> +			err = tegra_bpmp_init_powergates(bpmp);
> +			if (err < 0)
> +				goto free_mrq;
> +		}
>  	}
>  
>  	err = tegra_bpmp_init_debugfs(bpmp);
> @@ -844,9 +971,10 @@ static int tegra_bpmp_probe(struct platform_device *pdev)
>  	return 0;
>  
>  free_mrq:
> -	tegra_bpmp_free_mrq(bpmp, MRQ_PING, bpmp);
> +	if (!ACPI_HANDLE(bpmp->dev))
> +		tegra_bpmp_free_mrq(bpmp, MRQ_PING, bpmp);
>  deinit:
> -	if (bpmp->soc->ops->deinit)
> +	if (bpmp->soc->ops && bpmp->soc->ops->deinit)
>  		bpmp->soc->ops->deinit(bpmp);
>  
>  	return err;
> @@ -867,7 +995,7 @@ static int __maybe_unused tegra_bpmp_resume(struct device *dev)
>  
>  	bpmp->suspended = false;
>  
> -	if (bpmp->soc->ops->resume)
> +	if (bpmp->soc->ops && bpmp->soc->ops->resume)
>  		return bpmp->soc->ops->resume(bpmp);
>  	else
>  		return 0;
> @@ -939,10 +1067,25 @@ static const struct of_device_id tegra_bpmp_match[] = {
>  	{ }
>  };
>  
> +#ifdef CONFIG_ACPI
> +static const struct tegra_bpmp_soc tegra_bpmp_acpi_soc = { };
> +
> +static const struct acpi_device_id tegra_bpmp_acpi_match[] = {
> +	{
> +		.id = "NVDA3001",
> +		.driver_data = (kernel_ulong_t)&tegra_bpmp_acpi_soc,
> +	},
> +	{ }
> +};
> +#endif
> +
>  static struct platform_driver tegra_bpmp_driver = {
>  	.driver = {
>  		.name = "tegra-bpmp",
>  		.of_match_table = tegra_bpmp_match,
> +#ifdef CONFIG_ACPI
> +		.acpi_match_table = tegra_bpmp_acpi_match,
> +#endif
>  		.pm = &tegra_bpmp_pm_ops,
>  		.suppress_bind_attrs = true,
>  	},
> -- 
> 2.43.0
> 




  reply	other threads:[~2026-07-23  5:10 UTC|newest]

Thread overview: 9+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2026-07-22 11:05 [PATCH v2 0/5] firmware: tegra: bpmp: Add ACPI and MBWT support Aniruddha Rao
2026-07-22 11:05 ` [PATCH v2 1/5] firmware: tegra: bpmp: Move channel initialization to helper Aniruddha Rao
2026-07-22 11:05 ` [PATCH v2 2/5] firmware: tegra: bpmp: Add ACPI support Aniruddha Rao
2026-07-23  5:10   ` Mikko Perttunen [this message]
2026-07-22 11:05 ` [PATCH v2 3/5] firmware: tegra: bpmp: Add the Memory Bandwidth Throttler ABI definitions Aniruddha Rao
2026-07-22 11:05 ` [PATCH v2 4/5] firmware: tegra: bpmp: Add MBWT BPMP helpers Aniruddha Rao
2026-07-23  5:15   ` Mikko Perttunen
2026-07-22 11:05 ` [PATCH v2 5/5] firmware: tegra: bpmp: Add MBWT sysfs interface Aniruddha Rao
2026-07-23  5:21   ` Mikko Perttunen

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=yp4_Hg6NTM6XvmUccLSv1w@nvidia.com \
    --to=mperttunen@nvidia.com \
    --cc=anrao@nvidia.com \
    --cc=jonathanh@nvidia.com \
    --cc=linux-kernel@vger.kernel.org \
    --cc=linux-tegra@vger.kernel.org \
    --cc=thierry.reding@kernel.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.