From: bugtrack@alsa-project.org
To: alsa-devel@alsa-project.org
Subject: [ALSA - driver 0001287]: oss emulation does not work any more.
Date: Wed, 3 Aug 2005 15:03:30 +0200 [thread overview]
Message-ID: <04e1cd1cd144ce2cad2cef2e3848720a@bugtrack.alsa-project.org> (raw)
A NOTE has been added to this issue.
======================================================================
<https://bugtrack.alsa-project.org/alsa-bug/view.php?id=1287>
======================================================================
Reported By: eNTi
Assigned To:
======================================================================
Project: ALSA - driver
Issue ID: 1287
Category: CORE OSS - pcm
Reproducibility: always
Severity: block
Priority: normal
Status: new
Distribution: gentoo
Kernel Version: Linux eNTi 2.6.12-gentoo-r6 #4 SMP Thu Jul 28
22:36:42 CEST 2005 i686 AMD Athlon(tm) 64 Processor 3500+ AuthenticAMD GNU/Linux
======================================================================
Date Submitted: 07-29-2005 01:00 CEST
Last Modified: 08-03-2005 15:03 CEST
======================================================================
Summary: oss emulation does not work any more.
Description:
i'm getting these error messages, when the kernel starts up:
kobject_register failed for snd (-17)
[<c0206fe9>] kobject_register+0x49/0x80
[<c0136b00>] mod_sysfs_setup+0x50/0xb0
[<c0137d34>] load_module+0x8b4/0xb90
[<c01380a4>] sys_init_module+0x64/0x220
[<c0102f1b>] sysenter_past_esp+0x54/0x75
snd_hwdep: Unknown symbol snd_verbose_printk
kobject_register failed for snd_page_alloc (-17)
[<c0206fe9>] kobject_register+0x49/0x80
[<c0136b00>] mod_sysfs_setup+0x50/0xb0
[<c0137d34>] load_module+0x8b4/0xb90
[<c01380a4>] sys_init_module+0x64/0x220
[<c0102f1b>] sysenter_past_esp+0x54/0x75
snd_timer: Unknown symbol snd_verbose_printk
snd_pcm: Unknown symbol snd_verbose_printk
snd_ac97_codec: Unknown symbol snd_verbose_printk
snd_seq_device: Unknown symbol snd_verbose_printk
snd_rawmidi: Unknown symbol snd_verbose_printk
snd_emu10k1: Unknown symbol snd_verbose_printk
ieee1394: Host added: ID:BUS[0-00:1023] GUID[00508d0000ee8226]
ieee1394: Host added: ID:BUS[1-00:1023] GUID[00023c01510808b8]
nvidia: module license 'NVIDIA' taints kernel.
ACPI: PCI Interrupt 0000:01:00.0[A] -> GSI 16 (level, low) -> IRQ 16
NVRM: loading NVIDIA Linux x86 NVIDIA Kernel Module 1.0-6629 Wed Nov 3
13:12:
51 PST 2004
Velocity is AUTO mode
eth0: Link autonegation speed 1000M bps full duplex
kjournald starting. Commit interval 5 seconds
EXT3 FS on dm-0, internal journal
EXT3-fs: mounted filesystem with ordered data mode.
EXT3-fs warning: maximal mount count reached, running e2fsck is
recommended
kjournald starting. Commit interval 5 seconds
EXT3 FS on dm-1, internal journal
EXT3-fs: mounted filesystem with ordered data mode.
kobject_register failed for snd (-17)
[<c0206fe9>] kobject_register+0x49/0x80
[<c0136b00>] mod_sysfs_setup+0x50/0xb0
[<c0137d34>] load_module+0x8b4/0xb90
[<c01380a4>] sys_init_module+0x64/0x220
[<c0102f1b>] sysenter_past_esp+0x54/0x75
snd_hwdep: Unknown symbol snd_verbose_printk
kobject_register failed for snd_page_alloc (-17)
[<c0206fe9>] kobject_register+0x49/0x80
[<c0136b00>] mod_sysfs_setup+0x50/0xb0
[<c0137d34>] load_module+0x8b4/0xb90
[<c01380a4>] sys_init_module+0x64/0x220
[<c0102f1b>] sysenter_past_esp+0x54/0x75
snd_timer: Unknown symbol snd_verbose_printk
snd_pcm: Unknown symbol snd_verbose_printk
snd_ac97_codec: Unknown symbol snd_verbose_printk
snd_seq_device: Unknown symbol snd_verbose_printk
snd_rawmidi: Unknown symbol snd_verbose_printk
snd_emu10k1: Unknown symbol snd_verbose_printk
kobject_register failed for snd (-17)
[<c0206fe9>] kobject_register+0x49/0x80
[<c0136b00>] mod_sysfs_setup+0x50/0xb0
[<c0137d34>] load_module+0x8b4/0xb90
[<c01380a4>] sys_init_module+0x64/0x220
[<c0102f1b>] sysenter_past_esp+0x54/0x75
snd_seq_device: Unknown symbol snd_verbose_printk
snd_timer: Unknown symbol snd_verbose_printk
snd_seq: Unknown symbol snd_verbose_printk
snd_seq_oss: Unknown symbol snd_verbose_printk
kobject_register failed for snd (-17)
[<c0206fe9>] kobject_register+0x49/0x80
[<c0136b00>] mod_sysfs_setup+0x50/0xb0
[<c0137d34>] load_module+0x8b4/0xb90
[<c01380a4>] sys_init_module+0x64/0x220
[<c0102f1b>] sysenter_past_esp+0x54/0x75
snd_mixer_oss: Unknown symbol snd_verbose_printk
kobject_register failed for snd_page_alloc (-17)
[<c0206fe9>] kobject_register+0x49/0x80
[<c0136b00>] mod_sysfs_setup+0x50/0xb0
[<c0137d34>] load_module+0x8b4/0xb90
[<c01380a4>] sys_init_module+0x64/0x220
[<c0102f1b>] sysenter_past_esp+0x54/0x75
snd_timer: Unknown symbol snd_verbose_printk
snd_pcm: Unknown symbol snd_verbose_printk
snd_pcm_oss: Unknown symbol snd_verbose_printk
kobject_register failed for snd (-17)
[<c0206fe9>] kobject_register+0x49/0x80
[<c0136b00>] mod_sysfs_setup+0x50/0xb0
[<c0137d34>] load_module+0x8b4/0xb90
[<c01380a4>] sys_init_module+0x64/0x220
[<c0102f1b>] sysenter_past_esp+0x54/0x75
snd_mixer_oss: Unknown symbol snd_verbose_printk
kobject_register failed for snd (-17)
[<c0206fe9>] kobject_register+0x49/0x80
[<c0136b00>] mod_sysfs_setup+0x50/0xb0
[<c0137d34>] load_module+0x8b4/0xb90
[<c01380a4>] sys_init_module+0x64/0x220
kobject_register failed for snd (-17)
[<c0206fe9>] kobject_register+0x49/0x80
[<c0136b00>] mod_sysfs_setup+0x50/0xb0
[<c0137d34>] load_module+0x8b4/0xb90
[<c01380a4>] sys_init_module+0x64/0x220
[<c0102f1b>] sysenter_past_esp+0x54/0x75
snd_mixer_oss: Unknown symbol snd_verbose_printk
kobject_register failed for snd (-17)
[<c0206fe9>] kobject_register+0x49/0x80
[<c0136b00>] mod_sysfs_setup+0x50/0xb0
[<c0137d34>] load_module+0x8b4/0xb90
[<c01380a4>] sys_init_module+0x64/0x220
[<c0102f1b>] sysenter_past_esp+0x54/0x75
snd_seq_device: Unknown symbol snd_verbose_printk
snd_timer: Unknown symbol snd_verbose_printk
snd_seq: Unknown symbol snd_verbose_printk
no /dev/sound/dsp, /dev/sound/mixer and /dev/sound/audio are created (by
udev).
alsa still works (xmms is playing fine).
======================================================================
----------------------------------------------------------------------
tiwai - 08-03-05 15:03
----------------------------------------------------------------------
Seems to be rather a problem of linux core than an ALSA-specific problem...
Issue History
Date Modified Username Field Change
======================================================================
07-29-05 01:00 eNTi New Issue
07-29-05 01:00 eNTi Distribution => gentoo
07-29-05 01:00 eNTi Kernel Version => Linux eNTi
2.6.12-gentoo-r6 #4 SMP Thu Jul 28 22:36:42 CEST 2005 i686 AMD Athlon(tm) 64
Processor 3500+ AuthenticAMD GNU/Linux
08-03-05 15:03 tiwai Note Added: 0005630
======================================================================
-------------------------------------------------------
SF.Net email is sponsored by: Discover Easy Linux Migration Strategies
from IBM. Find simple to follow Roadmaps, straightforward articles,
informative Webcasts and more! Get everything you need to get up to
speed, fast. http://ads.osdn.com/?ad_id=7477&alloc_id=16492&op=click
next reply other threads:[~2005-08-03 13:03 UTC|newest]
Thread overview: 2+ messages / expand[flat|nested] mbox.gz Atom feed top
2005-08-03 13:03 bugtrack [this message]
-- strict thread matches above, loose matches on Subject: below --
2005-07-28 23:00 [ALSA - driver 0001287]: oss emulation does not work any more bugtrack
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=04e1cd1cd144ce2cad2cef2e3848720a@bugtrack.alsa-project.org \
--to=bugtrack@alsa-project.org \
--cc=alsa-devel@alsa-project.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox