[PATCH AUTOSEL 6.0 07/44] ALSA: hda: Fix page fault in snd_hda_codec_shutdown()

[PATCH AUTOSEL 6.0 07/44] ALSA: hda: Fix page fault in snd_hda_codec_shutdown()

[Sasha Levin]

From: Cezary Rojewski <cezary.rojewski@intel.com>

[ Upstream commit f2bd1c5ae2cb0cf9525c9bffc0038c12dd7e1338 ]

If early probe of HDAudio bus driver fails e.g.: due to missing
firmware file, snd_hda_codec_shutdown() ends in manipulating
uninitialized codec->pcm_list_head causing page fault.

Initialization of HDAudio codec in ASoC is split in two:
- snd_hda_codec_device_init()
- snd_hda_codec_device_new()

snd_hda_codec_device_init() is called during probe_codecs() by HDAudio
bus driver while snd_hda_codec_device_new() is called by
codec-component's ->probe(). The second call will not happen until all
components required by related sound card are present within the ASoC
framework. With firmware failing to load during the PCI's deferred
initialization i.e.: probe_work(), no platform components are ever
registered. HDAudio codec enumeration is done at that point though, so
the codec components became registered to ASoC framework, calling
snd_hda_codec_device_init() in the process.

Now, during platform reboot snd_hda_codec_shutdown() is called for every
codec found on the HDAudio bus causing oops if any of them has not
completed both of their initialization steps. Relocating field
initialization fixes the issue.

Reviewed-by: Kai Vehmanen <kai.vehmanen@linux.intel.com>
Reviewed-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Signed-off-by: Cezary Rojewski <cezary.rojewski@intel.com>
Link: https://lore.kernel.org/r/20220816111727.3218543-7-cezary.rojewski@intel.com
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 sound/pci/hda/hda_codec.c | 41 +++++++++++++++++++--------------------
 1 file changed, 20 insertions(+), 21 deletions(-)

diff --git a/sound/pci/hda/hda_codec.c b/sound/pci/hda/hda_codec.c
index 384426d7e9dd..4ae8b9574778 100644
--- a/sound/pci/hda/hda_codec.c
+++ b/sound/pci/hda/hda_codec.c
@@ -931,8 +931,28 @@ snd_hda_codec_device_init(struct hda_bus *bus, unsigned int codec_addr,
 	}
 
 	codec->bus = bus;
+	codec->depop_delay = -1;
+	codec->fixup_id = HDA_FIXUP_ID_NOT_SET;
+	codec->core.dev.release = snd_hda_codec_dev_release;
+	codec->core.exec_verb = codec_exec_verb;
 	codec->core.type = HDA_DEV_LEGACY;
 
+	mutex_init(&codec->spdif_mutex);
+	mutex_init(&codec->control_mutex);
+	snd_array_init(&codec->mixers, sizeof(struct hda_nid_item), 32);
+	snd_array_init(&codec->nids, sizeof(struct hda_nid_item), 32);
+	snd_array_init(&codec->init_pins, sizeof(struct hda_pincfg), 16);
+	snd_array_init(&codec->driver_pins, sizeof(struct hda_pincfg), 16);
+	snd_array_init(&codec->cvt_setups, sizeof(struct hda_cvt_setup), 8);
+	snd_array_init(&codec->spdif_out, sizeof(struct hda_spdif_out), 16);
+	snd_array_init(&codec->jacktbl, sizeof(struct hda_jack_tbl), 16);
+	snd_array_init(&codec->verbs, sizeof(struct hda_verb *), 8);
+	INIT_LIST_HEAD(&codec->conn_list);
+	INIT_LIST_HEAD(&codec->pcm_list_head);
+	INIT_DELAYED_WORK(&codec->jackpoll_work, hda_jackpoll_work);
+	refcount_set(&codec->pcm_ref, 1);
+	init_waitqueue_head(&codec->remove_sleep);
+
 	return codec;
 }
 EXPORT_SYMBOL_GPL(snd_hda_codec_device_init);
@@ -985,29 +1005,8 @@ int snd_hda_codec_device_new(struct hda_bus *bus, struct snd_card *card,
 	if (snd_BUG_ON(codec_addr > HDA_MAX_CODEC_ADDRESS))
 		return -EINVAL;
 
-	codec->core.dev.release = snd_hda_codec_dev_release;
-	codec->core.exec_verb = codec_exec_verb;
-
 	codec->card = card;
 	codec->addr = codec_addr;
-	mutex_init(&codec->spdif_mutex);
-	mutex_init(&codec->control_mutex);
-	snd_array_init(&codec->mixers, sizeof(struct hda_nid_item), 32);
-	snd_array_init(&codec->nids, sizeof(struct hda_nid_item), 32);
-	snd_array_init(&codec->init_pins, sizeof(struct hda_pincfg), 16);
-	snd_array_init(&codec->driver_pins, sizeof(struct hda_pincfg), 16);
-	snd_array_init(&codec->cvt_setups, sizeof(struct hda_cvt_setup), 8);
-	snd_array_init(&codec->spdif_out, sizeof(struct hda_spdif_out), 16);
-	snd_array_init(&codec->jacktbl, sizeof(struct hda_jack_tbl), 16);
-	snd_array_init(&codec->verbs, sizeof(struct hda_verb *), 8);
-	INIT_LIST_HEAD(&codec->conn_list);
-	INIT_LIST_HEAD(&codec->pcm_list_head);
-	refcount_set(&codec->pcm_ref, 1);
-	init_waitqueue_head(&codec->remove_sleep);
-
-	INIT_DELAYED_WORK(&codec->jackpoll_work, hda_jackpoll_work);
-	codec->depop_delay = -1;
-	codec->fixup_id = HDA_FIXUP_ID_NOT_SET;
 
 #ifdef CONFIG_PM
 	codec->power_jiffies = jiffies;
-- 
2.35.1

[PATCH AUTOSEL 6.0 08/44] ALSA: usb-audio: Add quirk to enable Avid Mbox 3 support

[Sasha Levin]

From: Conner Knox <connerknoxpublic@gmail.com>

[ Upstream commit b01104fc62b6194c852124f6c6df1c0a5c031fc1 ]

Add support for Avid Mbox3 USB audio interface at 48kHz

Signed-off-by: Conner Knox <connerknoxpublic@gmail.com>
Link: https://lore.kernel.org/r/20220818201433.16360-1-mbarriolinares@gmail.com
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 sound/usb/quirks-table.h |  76 ++++++++++
 sound/usb/quirks.c       | 302 +++++++++++++++++++++++++++++++++++++++
 2 files changed, 378 insertions(+)

diff --git a/sound/usb/quirks-table.h b/sound/usb/quirks-table.h
index f93201a830b5..06dfdd45cff8 100644
--- a/sound/usb/quirks-table.h
+++ b/sound/usb/quirks-table.h
@@ -2985,6 +2985,82 @@ YAMAHA_DEVICE(0x7010, "UB99"),
 		}
 	}
 },
+/* DIGIDESIGN MBOX 3 */
+{
+	USB_DEVICE(0x0dba, 0x5000),
+	.driver_info = (unsigned long) &(const struct snd_usb_audio_quirk) {
+		.vendor_name = "Digidesign",
+		.product_name = "Mbox 3",
+		.ifnum = QUIRK_ANY_INTERFACE,
+		.type = QUIRK_COMPOSITE,
+		.data = (const struct snd_usb_audio_quirk[]) {
+			{
+				.ifnum = 0,
+				.type = QUIRK_IGNORE_INTERFACE
+			},
+			{
+				.ifnum = 1,
+				.type = QUIRK_IGNORE_INTERFACE
+			},
+			{
+				.ifnum = 2,
+				.type = QUIRK_AUDIO_FIXED_ENDPOINT,
+				.data = &(const struct audioformat) {
+					.formats = SNDRV_PCM_FMTBIT_S24_3LE,
+					.channels = 4,
+					.iface = 2,
+					.altsetting = 1,
+					.altset_idx = 1,
+					.attributes = 0x00,
+					.endpoint = 0x01,
+					.ep_attr = USB_ENDPOINT_XFER_ISOC |
+						USB_ENDPOINT_SYNC_ASYNC,
+					.rates = SNDRV_PCM_RATE_48000,
+					.rate_min = 48000,
+					.rate_max = 48000,
+					.nr_rates = 1,
+					.rate_table = (unsigned int[]) {
+						48000
+					}
+				}
+			},
+			{
+				.ifnum = 3,
+				.type = QUIRK_AUDIO_FIXED_ENDPOINT,
+				.data = &(const struct audioformat) {
+					.formats = SNDRV_PCM_FMTBIT_S24_3LE,
+					.channels = 4,
+					.iface = 3,
+					.altsetting = 1,
+					.altset_idx = 1,
+					.endpoint = 0x81,
+					.attributes = 0x00,
+					.ep_attr = USB_ENDPOINT_XFER_ISOC |
+						USB_ENDPOINT_SYNC_ASYNC,
+					.maxpacksize = 0x009c,
+					.rates = SNDRV_PCM_RATE_48000,
+					.rate_min = 48000,
+					.rate_max = 48000,
+					.nr_rates = 1,
+					.rate_table = (unsigned int[]) {
+						48000
+					}
+				}
+			},
+			{
+				.ifnum = 4,
+				.type = QUIRK_MIDI_FIXED_ENDPOINT,
+				.data = &(const struct snd_usb_midi_endpoint_info) {
+					.out_cables = 0x0001,
+					.in_cables  = 0x0001
+				}
+			},
+			{
+				.ifnum = -1
+			}
+		}
+	}
+},
 {
 	/* Tascam US122 MKII - playback-only support */
 	USB_DEVICE_VENDOR_SPEC(0x0644, 0x8021),
diff --git a/sound/usb/quirks.c b/sound/usb/quirks.c
index 5b4d8f5eade2..194c75c45628 100644
--- a/sound/usb/quirks.c
+++ b/sound/usb/quirks.c
@@ -1020,6 +1020,304 @@ static int snd_usb_axefx3_boot_quirk(struct usb_device *dev)
 	return 0;
 }
 
+static void mbox3_setup_48_24_magic(struct usb_device *dev)
+{
+	/* The Mbox 3 is "little endian" */
+	/* max volume is: 0x0000. */
+	/* min volume is: 0x0080 (shown in little endian form) */
+
+
+	/* Load 48000Hz rate into buffer */
+	u8 com_buff[4] = {0x80, 0xbb, 0x00, 0x00};
+
+	/* Set 48000Hz sample rate */
+	snd_usb_ctl_msg(dev, usb_sndctrlpipe(dev, 0),
+			0x01, 0x21, 0x0100, 0x0001, &com_buff, 4);  //Is this really needed?
+	snd_usb_ctl_msg(dev, usb_sndctrlpipe(dev, 0),
+			0x01, 0x21, 0x0100, 0x8101, &com_buff, 4);
+
+	/* Deactivate Tuner */
+	/* on  = 0x01*/
+	/* off = 0x00*/
+	com_buff[0] = 0x00;
+	snd_usb_ctl_msg(dev, usb_sndctrlpipe(dev, 0),
+		0x01, 0x21, 0x0003, 0x2001, &com_buff, 1);
+
+	/* Set clock source to Internal (as opposed to S/PDIF) */
+	com_buff[0] = 0x01;
+	snd_usb_ctl_msg(dev, usb_sndctrlpipe(dev, 0),
+			1, 0x21, 0x0100, 0x8001, &com_buff, 1);
+
+	/* Mute the hardware loopbacks to start the device in a known state. */
+	com_buff[0] = 0x00;
+	com_buff[1] = 0x80;
+	/* Analogue input 1 left channel: */
+	snd_usb_ctl_msg(dev, usb_sndctrlpipe(dev, 0),
+			1, 0x21, 0x0110, 0x4001, &com_buff, 2);
+	/* Analogue input 1 right channel: */
+	snd_usb_ctl_msg(dev, usb_sndctrlpipe(dev, 0),
+			1, 0x21, 0x0111, 0x4001, &com_buff, 2);
+	/* Analogue input 2 left channel: */
+	snd_usb_ctl_msg(dev, usb_sndctrlpipe(dev, 0),
+			1, 0x21, 0x0114, 0x4001, &com_buff, 2);
+	/* Analogue input 2 right channel: */
+	snd_usb_ctl_msg(dev, usb_sndctrlpipe(dev, 0),
+			1, 0x21, 0x0115, 0x4001, &com_buff, 2);
+	/* Analogue input 3 left channel: */
+	snd_usb_ctl_msg(dev, usb_sndctrlpipe(dev, 0),
+			1, 0x21, 0x0118, 0x4001, &com_buff, 2);
+	/* Analogue input 3 right channel: */
+	snd_usb_ctl_msg(dev, usb_sndctrlpipe(dev, 0),
+			1, 0x21, 0x0119, 0x4001, &com_buff, 2);
+	/* Analogue input 4 left channel: */
+	snd_usb_ctl_msg(dev, usb_sndctrlpipe(dev, 0),
+			1, 0x21, 0x011c, 0x4001, &com_buff, 2);
+	/* Analogue input 4 right channel: */
+	snd_usb_ctl_msg(dev, usb_sndctrlpipe(dev, 0),
+			1, 0x21, 0x011d, 0x4001, &com_buff, 2);
+
+	/* Set software sends to output */
+	com_buff[0] = 0x00;
+	com_buff[1] = 0x00;
+	/* Analogue software return 1 left channel: */
+	snd_usb_ctl_msg(dev, usb_sndctrlpipe(dev, 0),
+			1, 0x21, 0x0100, 0x4001, &com_buff, 2);
+	com_buff[0] = 0x00;
+	com_buff[1] = 0x80;
+	/* Analogue software return 1 right channel: */
+	snd_usb_ctl_msg(dev, usb_sndctrlpipe(dev, 0),
+			1, 0x21, 0x0101, 0x4001, &com_buff, 2);
+	com_buff[0] = 0x00;
+	com_buff[1] = 0x80;
+	/* Analogue software return 2 left channel: */
+	snd_usb_ctl_msg(dev, usb_sndctrlpipe(dev, 0),
+			1, 0x21, 0x0104, 0x4001, &com_buff, 2);
+	com_buff[0] = 0x00;
+	com_buff[1] = 0x00;
+	/* Analogue software return 2 right channel: */
+	snd_usb_ctl_msg(dev, usb_sndctrlpipe(dev, 0),
+			1, 0x21, 0x0105, 0x4001, &com_buff, 2);
+
+	com_buff[0] = 0x00;
+	com_buff[1] = 0x80;
+	/* Analogue software return 3 left channel: */
+	snd_usb_ctl_msg(dev, usb_sndctrlpipe(dev, 0),
+			1, 0x21, 0x0108, 0x4001, &com_buff, 2);
+	/* Analogue software return 3 right channel: */
+	snd_usb_ctl_msg(dev, usb_sndctrlpipe(dev, 0),
+			1, 0x21, 0x0109, 0x4001, &com_buff, 2);
+	/* Analogue software return 4 left channel: */
+	snd_usb_ctl_msg(dev, usb_sndctrlpipe(dev, 0),
+			1, 0x21, 0x010c, 0x4001, &com_buff, 2);
+	/* Analogue software return 4 right channel: */
+	snd_usb_ctl_msg(dev, usb_sndctrlpipe(dev, 0),
+			1, 0x21, 0x010d, 0x4001, &com_buff, 2);
+
+	/* Return to muting sends */
+	com_buff[0] = 0x00;
+	com_buff[1] = 0x80;
+	/* Analogue fx return left channel: */
+	snd_usb_ctl_msg(dev, usb_sndctrlpipe(dev, 0),
+			1, 0x21, 0x0120, 0x4001, &com_buff, 2);
+	/* Analogue fx return right channel: */
+	snd_usb_ctl_msg(dev, usb_sndctrlpipe(dev, 0),
+			1, 0x21, 0x0121, 0x4001, &com_buff, 2);
+
+	/* Analogue software input 1 fx send: */
+	snd_usb_ctl_msg(dev, usb_sndctrlpipe(dev, 0),
+			1, 0x21, 0x0100, 0x4201, &com_buff, 2);
+	/* Analogue software input 2 fx send: */
+	snd_usb_ctl_msg(dev, usb_sndctrlpipe(dev, 0),
+			1, 0x21, 0x0101, 0x4201, &com_buff, 2);
+	/* Analogue software input 3 fx send: */
+	snd_usb_ctl_msg(dev, usb_sndctrlpipe(dev, 0),
+			1, 0x21, 0x0102, 0x4201, &com_buff, 2);
+	/* Analogue software input 4 fx send: */
+	snd_usb_ctl_msg(dev, usb_sndctrlpipe(dev, 0),
+			1, 0x21, 0x0103, 0x4201, &com_buff, 2);
+	/* Analogue input 1 fx send: */
+	snd_usb_ctl_msg(dev, usb_sndctrlpipe(dev, 0),
+			1, 0x21, 0x0104, 0x4201, &com_buff, 2);
+	/* Analogue input 2 fx send: */
+	snd_usb_ctl_msg(dev, usb_sndctrlpipe(dev, 0),
+			1, 0x21, 0x0105, 0x4201, &com_buff, 2);
+	/* Analogue input 3 fx send: */
+	snd_usb_ctl_msg(dev, usb_sndctrlpipe(dev, 0),
+			1, 0x21, 0x0106, 0x4201, &com_buff, 2);
+	/* Analogue input 4 fx send: */
+	snd_usb_ctl_msg(dev, usb_sndctrlpipe(dev, 0),
+			1, 0x21, 0x0107, 0x4201, &com_buff, 2);
+
+	/* Toggle allowing host control */
+	com_buff[0] = 0x02;
+	snd_usb_ctl_msg(dev, usb_sndctrlpipe(dev, 0),
+			3, 0x21, 0x0000, 0x2001, &com_buff, 1);
+
+	/* Do not dim fx returns */
+	com_buff[0] = 0x00;
+	snd_usb_ctl_msg(dev, usb_sndctrlpipe(dev, 0),
+			3, 0x21, 0x0002, 0x2001, &com_buff, 1);
+
+	/* Do not set fx returns to mono */
+	com_buff[0] = 0x00;
+	snd_usb_ctl_msg(dev, usb_sndctrlpipe(dev, 0),
+			3, 0x21, 0x0001, 0x2001, &com_buff, 1);
+
+	/* Mute the S/PDIF hardware loopback
+	 * same odd volume logic here as above
+	 */
+	com_buff[0] = 0x00;
+	com_buff[1] = 0x80;
+	/* S/PDIF hardware input 1 left channel */
+	snd_usb_ctl_msg(dev, usb_sndctrlpipe(dev, 0),
+			1, 0x21, 0x0112, 0x4001, &com_buff, 2);
+	/* S/PDIF hardware input 1 right channel */
+	snd_usb_ctl_msg(dev, usb_sndctrlpipe(dev, 0),
+			1, 0x21, 0x0113, 0x4001, &com_buff, 2);
+	/* S/PDIF hardware input 2 left channel */
+	snd_usb_ctl_msg(dev, usb_sndctrlpipe(dev, 0),
+			1, 0x21, 0x0116, 0x4001, &com_buff, 2);
+	/* S/PDIF hardware input 2 right channel */
+	snd_usb_ctl_msg(dev, usb_sndctrlpipe(dev, 0),
+			1, 0x21, 0x0117, 0x4001, &com_buff, 2);
+	/* S/PDIF hardware input 3 left channel */
+	snd_usb_ctl_msg(dev, usb_sndctrlpipe(dev, 0),
+			1, 0x21, 0x011a, 0x4001, &com_buff, 2);
+	/* S/PDIF hardware input 3 right channel */
+	snd_usb_ctl_msg(dev, usb_sndctrlpipe(dev, 0),
+			1, 0x21, 0x011b, 0x4001, &com_buff, 2);
+	/* S/PDIF hardware input 4 left channel */
+	snd_usb_ctl_msg(dev, usb_sndctrlpipe(dev, 0),
+			1, 0x21, 0x011e, 0x4001, &com_buff, 2);
+	/* S/PDIF hardware input 4 right channel */
+	snd_usb_ctl_msg(dev, usb_sndctrlpipe(dev, 0),
+			1, 0x21, 0x011f, 0x4001, &com_buff, 2);
+	/* S/PDIF software return 1 left channel */
+	snd_usb_ctl_msg(dev, usb_sndctrlpipe(dev, 0),
+			1, 0x21, 0x0102, 0x4001, &com_buff, 2);
+	/* S/PDIF software return 1 right channel */
+	snd_usb_ctl_msg(dev, usb_sndctrlpipe(dev, 0),
+			1, 0x21, 0x0103, 0x4001, &com_buff, 2);
+	/* S/PDIF software return 2 left channel */
+	snd_usb_ctl_msg(dev, usb_sndctrlpipe(dev, 0),
+			1, 0x21, 0x0106, 0x4001, &com_buff, 2);
+	/* S/PDIF software return 2 right channel */
+	snd_usb_ctl_msg(dev, usb_sndctrlpipe(dev, 0),
+			1, 0x21, 0x0107, 0x4001, &com_buff, 2);
+
+	com_buff[0] = 0x00;
+	com_buff[1] = 0x00;
+	/* S/PDIF software return 3 left channel */
+	snd_usb_ctl_msg(dev, usb_sndctrlpipe(dev, 0),
+			1, 0x21, 0x010a, 0x4001, &com_buff, 2);
+
+	com_buff[0] = 0x00;
+	com_buff[1] = 0x80;
+	/* S/PDIF software return 3 right channel */
+	snd_usb_ctl_msg(dev, usb_sndctrlpipe(dev, 0),
+			1, 0x21, 0x010b, 0x4001, &com_buff, 2);
+	/* S/PDIF software return 4 left channel */
+	snd_usb_ctl_msg(dev, usb_sndctrlpipe(dev, 0),
+			1, 0x21, 0x010e, 0x4001, &com_buff, 2);
+
+	com_buff[0] = 0x00;
+	com_buff[1] = 0x00;
+	/* S/PDIF software return 4 right channel */
+	snd_usb_ctl_msg(dev, usb_sndctrlpipe(dev, 0),
+			1, 0x21, 0x010f, 0x4001, &com_buff, 2);
+
+	com_buff[0] = 0x00;
+	com_buff[1] = 0x80;
+	/* S/PDIF fx returns left channel */
+	snd_usb_ctl_msg(dev, usb_sndctrlpipe(dev, 0),
+			1, 0x21, 0x0122, 0x4001, &com_buff, 2);
+	/* S/PDIF fx returns right channel */
+	snd_usb_ctl_msg(dev, usb_sndctrlpipe(dev, 0),
+			1, 0x21, 0x0123, 0x4001, &com_buff, 2);
+
+	/* Set the dropdown "Effect" to the first option */
+	/* Room1  = 0x00 */
+	/* Room2  = 0x01 */
+	/* Room3  = 0x02 */
+	/* Hall 1 = 0x03 */
+	/* Hall 2 = 0x04 */
+	/* Plate  = 0x05 */
+	/* Delay  = 0x06 */
+	/* Echo   = 0x07 */
+	com_buff[0] = 0x00;
+	snd_usb_ctl_msg(dev, usb_sndctrlpipe(dev, 0),
+			1, 0x21, 0x0200, 0x4301, &com_buff, 1);	/* max is 0xff */
+	/* min is 0x00 */
+
+
+	/* Set the effect duration to 0 */
+	/* max is 0xffff */
+	/* min is 0x0000 */
+	com_buff[0] = 0x00;
+	com_buff[1] = 0x00;
+	snd_usb_ctl_msg(dev, usb_sndctrlpipe(dev, 0),
+			1, 0x21, 0x0400, 0x4301, &com_buff, 2);
+
+	/* Set the effect volume and feedback to 0 */
+	/* max is 0xff */
+	/* min is 0x00 */
+	com_buff[0] = 0x00;
+	/* feedback: */
+	snd_usb_ctl_msg(dev, usb_sndctrlpipe(dev, 0),
+			1, 0x21, 0x0500, 0x4301, &com_buff, 1);
+	/* volume: */
+	snd_usb_ctl_msg(dev, usb_sndctrlpipe(dev, 0),
+			1, 0x21, 0x0300, 0x4301, &com_buff, 1);
+
+	/* Set soft button hold duration */
+	/* 0x03 = 250ms */
+	/* 0x05 = 500ms DEFAULT */
+	/* 0x08 = 750ms */
+	/* 0x0a = 1sec */
+	com_buff[0] = 0x05;
+	snd_usb_ctl_msg(dev, usb_sndctrlpipe(dev, 0),
+			3, 0x21, 0x0005, 0x2001, &com_buff, 1);
+
+	/* Use dim LEDs for button of state */
+	com_buff[0] = 0x00;
+	snd_usb_ctl_msg(dev, usb_sndctrlpipe(dev, 0),
+			3, 0x21, 0x0004, 0x2001, &com_buff, 1);
+}
+
+#define MBOX3_DESCRIPTOR_SIZE	464
+
+static int snd_usb_mbox3_boot_quirk(struct usb_device *dev)
+{
+	struct usb_host_config *config = dev->actconfig;
+	int err;
+	int descriptor_size;
+
+	descriptor_size = le16_to_cpu(get_cfg_desc(config)->wTotalLength);
+
+	if (descriptor_size != MBOX3_DESCRIPTOR_SIZE) {
+		dev_err(&dev->dev, "Invalid descriptor size=%d.\n", descriptor_size);
+		return -ENODEV;
+	}
+
+	dev_dbg(&dev->dev, "device initialised!\n");
+
+	err = usb_get_descriptor(dev, USB_DT_DEVICE, 0,
+		&dev->descriptor, sizeof(dev->descriptor));
+	config = dev->actconfig;
+	if (err < 0)
+		dev_dbg(&dev->dev, "error usb_get_descriptor: %d\n", err);
+
+	err = usb_reset_configuration(dev);
+	if (err < 0)
+		dev_dbg(&dev->dev, "error usb_reset_configuration: %d\n", err);
+	dev_dbg(&dev->dev, "mbox3_boot: new boot length = %d\n",
+		le16_to_cpu(get_cfg_desc(config)->wTotalLength));
+
+	mbox3_setup_48_24_magic(dev);
+	dev_info(&dev->dev, "Digidesign Mbox 3: 24bit 48kHz");
+
+	return 0; /* Successful boot */
+}
 
 #define MICROBOOK_BUF_SIZE 128
 
@@ -1324,6 +1622,10 @@ int snd_usb_apply_boot_quirk(struct usb_device *dev,
 	case USB_ID(0x0dba, 0x3000):
 		/* Digidesign Mbox 2 */
 		return snd_usb_mbox2_boot_quirk(dev);
+	case USB_ID(0x0dba, 0x5000):
+		/* Digidesign Mbox 3 */
+		return snd_usb_mbox3_boot_quirk(dev);
+
 
 	case USB_ID(0x1235, 0x0010): /* Focusrite Novation Saffire 6 USB */
 	case USB_ID(0x1235, 0x0018): /* Focusrite Novation Twitch */
-- 
2.35.1

[PATCH AUTOSEL 6.0 17/44] ALSA: usb-audio: Register card at the last interface

[Sasha Levin]

From: Takashi Iwai <tiwai@suse.de>

[ Upstream commit 6392dcd1d0c7034ccf630ec55fc9e5810ecadf3b ]

The USB-audio driver matches per interface, and as default, it
registers the card instance at the very first instance.  This can be a
problem for the devices that have multiple interfaces to be probed, as
the udev rule isn't applied properly for the later appearing
interfaces.  Although we introduced the delayed_register option and
the quirks for covering those shortcomings, it's nothing but a
workaround for specific devices.

This patch is an another attempt to fix the problem in a more generic
way.  Now the driver checks the whole USB device descriptor at the
very first time when an interface is attached to a sound card.  It
looks at each matching interface in the descriptor and remembers the
last matching one.  The snd_card_register() is invoked only when this
last interface is probed.

After this change, the quirks for the delayed registration become
superfluous, hence they are removed along with the patch.  OTOH, the
delayed_register option is still kept, as it might be useful for some
corner cases (e.g. a special driver overtakes the interface probe from
the standard driver, and the last interface probe may miss).

Link: https://lore.kernel.org/r/20220904161247.16461-1-tiwai@suse.de
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 sound/usb/card.c     | 32 +++++++++++++++++++++++++-------
 sound/usb/quirks.c   | 42 ------------------------------------------
 sound/usb/quirks.h   |  2 --
 sound/usb/usbaudio.h |  1 +
 4 files changed, 26 insertions(+), 51 deletions(-)

diff --git a/sound/usb/card.c b/sound/usb/card.c
index 706d249a9ad6..3aea241435fb 100644
--- a/sound/usb/card.c
+++ b/sound/usb/card.c
@@ -690,7 +690,7 @@ static bool get_alias_id(struct usb_device *dev, unsigned int *id)
 	return false;
 }
 
-static bool check_delayed_register_option(struct snd_usb_audio *chip, int iface)
+static int check_delayed_register_option(struct snd_usb_audio *chip)
 {
 	int i;
 	unsigned int id, inum;
@@ -699,14 +699,31 @@ static bool check_delayed_register_option(struct snd_usb_audio *chip, int iface)
 		if (delayed_register[i] &&
 		    sscanf(delayed_register[i], "%x:%x", &id, &inum) == 2 &&
 		    id == chip->usb_id)
-			return iface < inum;
+			return inum;
 	}
 
-	return false;
+	return -1;
 }
 
 static const struct usb_device_id usb_audio_ids[]; /* defined below */
 
+/* look for the last interface that matches with our ids and remember it */
+static void find_last_interface(struct snd_usb_audio *chip)
+{
+	struct usb_host_config *config = chip->dev->actconfig;
+	struct usb_interface *intf;
+	int i;
+
+	if (!config)
+		return;
+	for (i = 0; i < config->desc.bNumInterfaces; i++) {
+		intf = config->interface[i];
+		if (usb_match_id(intf, usb_audio_ids))
+			chip->last_iface = intf->altsetting[0].desc.bInterfaceNumber;
+	}
+	usb_audio_dbg(chip, "Found last interface = %d\n", chip->last_iface);
+}
+
 /* look for the corresponding quirk */
 static const struct snd_usb_audio_quirk *
 get_alias_quirk(struct usb_device *dev, unsigned int id)
@@ -813,6 +830,7 @@ static int usb_audio_probe(struct usb_interface *intf,
 			err = -ENODEV;
 			goto __error;
 		}
+		find_last_interface(chip);
 	}
 
 	if (chip->num_interfaces >= MAX_CARD_INTERFACES) {
@@ -862,11 +880,11 @@ static int usb_audio_probe(struct usb_interface *intf,
 		chip->need_delayed_register = false; /* clear again */
 	}
 
-	/* we are allowed to call snd_card_register() many times, but first
-	 * check to see if a device needs to skip it or do anything special
+	/* register card if we reach to the last interface or to the specified
+	 * one given via option
 	 */
-	if (!snd_usb_registration_quirk(chip, ifnum) &&
-	    !check_delayed_register_option(chip, ifnum)) {
+	if (check_delayed_register_option(chip) == ifnum ||
+	    chip->last_iface == ifnum) {
 		err = snd_card_register(chip->card);
 		if (err < 0)
 			goto __error;
diff --git a/sound/usb/quirks.c b/sound/usb/quirks.c
index 194c75c45628..eadac586bcc8 100644
--- a/sound/usb/quirks.c
+++ b/sound/usb/quirks.c
@@ -2030,48 +2030,6 @@ void snd_usb_audioformat_attributes_quirk(struct snd_usb_audio *chip,
 	}
 }
 
-/*
- * registration quirk:
- * the registration is skipped if a device matches with the given ID,
- * unless the interface reaches to the defined one.  This is for delaying
- * the registration until the last known interface, so that the card and
- * devices appear at the same time.
- */
-
-struct registration_quirk {
-	unsigned int usb_id;	/* composed via USB_ID() */
-	unsigned int interface;	/* the interface to trigger register */
-};
-
-#define REG_QUIRK_ENTRY(vendor, product, iface) \
-	{ .usb_id = USB_ID(vendor, product), .interface = (iface) }
-
-static const struct registration_quirk registration_quirks[] = {
-	REG_QUIRK_ENTRY(0x0951, 0x16d8, 2),	/* Kingston HyperX AMP */
-	REG_QUIRK_ENTRY(0x0951, 0x16ed, 2),	/* Kingston HyperX Cloud Alpha S */
-	REG_QUIRK_ENTRY(0x0951, 0x16ea, 2),	/* Kingston HyperX Cloud Flight S */
-	REG_QUIRK_ENTRY(0x0ecb, 0x1f46, 2),	/* JBL Quantum 600 */
-	REG_QUIRK_ENTRY(0x0ecb, 0x1f47, 2),	/* JBL Quantum 800 */
-	REG_QUIRK_ENTRY(0x0ecb, 0x1f4c, 2),	/* JBL Quantum 400 */
-	REG_QUIRK_ENTRY(0x0ecb, 0x2039, 2),	/* JBL Quantum 400 */
-	REG_QUIRK_ENTRY(0x0ecb, 0x203c, 2),	/* JBL Quantum 600 */
-	REG_QUIRK_ENTRY(0x0ecb, 0x203e, 2),	/* JBL Quantum 800 */
-	{ 0 }					/* terminator */
-};
-
-/* return true if skipping registration */
-bool snd_usb_registration_quirk(struct snd_usb_audio *chip, int iface)
-{
-	const struct registration_quirk *q;
-
-	for (q = registration_quirks; q->usb_id; q++)
-		if (chip->usb_id == q->usb_id)
-			return iface < q->interface;
-
-	/* Register as normal */
-	return false;
-}
-
 /*
  * driver behavior quirk flags
  */
diff --git a/sound/usb/quirks.h b/sound/usb/quirks.h
index 31abb7cb01a5..f9bfd5ac7bab 100644
--- a/sound/usb/quirks.h
+++ b/sound/usb/quirks.h
@@ -48,8 +48,6 @@ void snd_usb_audioformat_attributes_quirk(struct snd_usb_audio *chip,
 					  struct audioformat *fp,
 					  int stream);
 
-bool snd_usb_registration_quirk(struct snd_usb_audio *chip, int iface);
-
 void snd_usb_init_quirk_flags(struct snd_usb_audio *chip);
 
 #endif /* __USBAUDIO_QUIRKS_H */
diff --git a/sound/usb/usbaudio.h b/sound/usb/usbaudio.h
index ffbb4b0d09a0..2c6575029b1c 100644
--- a/sound/usb/usbaudio.h
+++ b/sound/usb/usbaudio.h
@@ -37,6 +37,7 @@ struct snd_usb_audio {
 	unsigned int quirk_flags;
 	unsigned int need_delayed_register:1; /* warn for delayed registration */
 	int num_interfaces;
+	int last_iface;
 	int num_suspended_intf;
 	int sample_rate_read_error;
 
-- 
2.35.1

[PATCH AUTOSEL 6.0 25/44] ALSA: intel-dspconfig: add ES8336 support for AlderLake-PS

[Sasha Levin]

From: Muralidhar Reddy <muralidhar.reddy@intel.com>

[ Upstream commit 9db1c9fa214ef41d098633ff40a87284ca6e1870 ]

added quirks for ESS8336 for AlderLake-PS

Reviewed-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com>
Signed-off-by: Muralidhar Reddy <muralidhar.reddy@intel.com>
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Link: https://lore.kernel.org/r/20220919114548.42769-1-pierre-louis.bossart@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 sound/hda/intel-dsp-config.c | 5 +++++
 1 file changed, 5 insertions(+)

diff --git a/sound/hda/intel-dsp-config.c b/sound/hda/intel-dsp-config.c
index 5a478649f338..b9eb3208f288 100644
--- a/sound/hda/intel-dsp-config.c
+++ b/sound/hda/intel-dsp-config.c
@@ -427,6 +427,11 @@ static const struct config_entry config_table[] = {
 		.device = 0x51cd,
 	},
 	/* Alderlake-PS */
+	{
+		.flags = FLAG_SOF,
+		.device = 0x51c9,
+		.codec_hid =  &essx_83x6,
+	},
 	{
 		.flags = FLAG_SOF | FLAG_SOF_ONLY_IF_DMIC_OR_SOUNDWIRE,
 		.device = 0x51c9,
-- 
2.35.1

[PATCH AUTOSEL 6.0 26/44] ASoC: SOF: pci: Change DMI match info to support all Chrome platforms

[Sasha Levin]

From: Jairaj Arava <jairaj.arava@intel.com>

[ Upstream commit c1c1fc8103f794a10c5c15e3c17879caf4f42c8f ]

In some Chrome platforms if OEM's use their own string as SYS_VENDOR than
"Google", it leads to firmware load failure from intel/sof/community path.

Hence, changing SYS_VENDOR to PRODUCT_FAMILY in which "Google" is used
as common prefix and is supported in all Chrome platforms.

Reviewed-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com>
Reviewed-by: Chao Song <chao.song@intel.com>
Reviewed-by: Curtis Malainey <curtis@malainey.com>
Signed-off-by: Jairaj Arava <jairaj.arava@intel.com>
Signed-off-by: Curtis Malainey <cujomalainey@chromium.org>
Signed-off-by: Sathyanarayana Nujella <sathyanarayana.nujella@intel.com>
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Link: https://lore.kernel.org/r/20220919114429.42700-1-pierre-louis.bossart@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 sound/soc/sof/sof-pci-dev.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/sound/soc/sof/sof-pci-dev.c b/sound/soc/sof/sof-pci-dev.c
index d627092b399d..643fd1036d60 100644
--- a/sound/soc/sof/sof-pci-dev.c
+++ b/sound/soc/sof/sof-pci-dev.c
@@ -138,7 +138,7 @@ static const struct dmi_system_id community_key_platforms[] = {
 		.ident = "Google Chromebooks",
 		.callback = chromebook_use_community_key,
 		.matches = {
-			DMI_MATCH(DMI_SYS_VENDOR, "Google"),
+			DMI_MATCH(DMI_PRODUCT_FAMILY, "Google"),
 		}
 	},
 	{},
-- 
2.35.1

[PATCH AUTOSEL 6.0 27/44] ASoC: sunxi: sun4i-codec: set debugfs_prefix for CPU DAI component

[Sasha Levin]

From: Mikhail Rudenko <mike.rudenko@gmail.com>

[ Upstream commit 717a8ff20f32792d6a94f2883e771482c37d844b ]

At present, succesfull probing of H3 Codec results in an error

    debugfs: Directory '1c22c00.codec' with parent 'H3 Audio Codec' already present!

This is caused by a directory name conflict between codec
components. Fix it by setting debugfs_prefix for the CPU DAI
component.

Signed-off-by: Mikhail Rudenko <mike.rudenko@gmail.com>
Link: https://lore.kernel.org/r/20220913212256.151799-2-mike.rudenko@gmail.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 sound/soc/sunxi/sun4i-codec.c | 3 +++
 1 file changed, 3 insertions(+)

diff --git a/sound/soc/sunxi/sun4i-codec.c b/sound/soc/sunxi/sun4i-codec.c
index 830beb38bf15..fdf3165acd70 100644
--- a/sound/soc/sunxi/sun4i-codec.c
+++ b/sound/soc/sunxi/sun4i-codec.c
@@ -1232,6 +1232,9 @@ static const struct snd_soc_component_driver sun8i_a23_codec_codec = {
 static const struct snd_soc_component_driver sun4i_codec_component = {
 	.name			= "sun4i-codec",
 	.legacy_dai_naming	= 1,
+#ifdef CONFIG_DEBUG_FS
+	.debugfs_prefix		= "cpu",
+#endif
 };
 
 #define SUN4I_CODEC_RATES	SNDRV_PCM_RATE_CONTINUOUS
-- 
2.35.1

[PATCH AUTOSEL 6.0 28/44] ASoC: SOF: add quirk to override topology mclk_id

[Sasha Levin]

From: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>

[ Upstream commit d136949dd8e2e309dc2f186507486b71cbe9acdb ]

Some Intel-based platforms rely on a topology file that hard-codes the
use of MCLK0. This is incorrect in 10% of the cases. Rather than
generating yet another set of topology files, this patch adds a kernel
module parameter to override the topology value.

In hindsight, we should never have allowed mclks to be specified in
topology, this is a hardware-level information that should not have
been visible in the topology.

Future patches will try to set this value automagically, e.g. by
parsing the NHLT content.

Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Reviewed-by: Kai Vehmanen <kai.vehmanen@linux.intel.com>
Reviewed-by: Bard Liao <yung-chuan.liao@linux.intel.com>
Link: https://lore.kernel.org/r/20220919115350.43104-3-pierre-louis.bossart@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 sound/soc/sof/intel/hda.c     | 11 +++++++++++
 sound/soc/sof/ipc3-topology.c |  7 +++++++
 sound/soc/sof/sof-priv.h      |  4 ++++
 3 files changed, 22 insertions(+)

diff --git a/sound/soc/sof/intel/hda.c b/sound/soc/sof/intel/hda.c
index 6d4ecbe14adf..ada2e6775749 100644
--- a/sound/soc/sof/intel/hda.c
+++ b/sound/soc/sof/intel/hda.c
@@ -376,6 +376,10 @@ static int dmic_num_override = -1;
 module_param_named(dmic_num, dmic_num_override, int, 0444);
 MODULE_PARM_DESC(dmic_num, "SOF HDA DMIC number");
 
+static int mclk_id_override = -1;
+module_param_named(mclk_id, mclk_id_override, int, 0444);
+MODULE_PARM_DESC(mclk_id, "SOF SSP mclk_id");
+
 #if IS_ENABLED(CONFIG_SND_SOC_SOF_HDA)
 static bool hda_codec_use_common_hdmi = IS_ENABLED(CONFIG_SND_HDA_CODEC_HDMI);
 module_param_named(use_common_hdmi, hda_codec_use_common_hdmi, bool, 0444);
@@ -1565,6 +1569,13 @@ struct snd_soc_acpi_mach *hda_machine_select(struct snd_sof_dev *sdev)
 
 			sof_pdata->tplg_filename = tplg_filename;
 		}
+
+		/* check if mclk_id should be modified from topology defaults */
+		if (mclk_id_override >= 0) {
+			dev_info(sdev->dev, "Overriding topology with MCLK %d from kernel_parameter\n", mclk_id_override);
+			sdev->mclk_id_override = true;
+			sdev->mclk_id_quirk = mclk_id_override;
+		}
 	}
 
 	/*
diff --git a/sound/soc/sof/ipc3-topology.c b/sound/soc/sof/ipc3-topology.c
index 65923e7a5976..a39b43850f0e 100644
--- a/sound/soc/sof/ipc3-topology.c
+++ b/sound/soc/sof/ipc3-topology.c
@@ -1249,6 +1249,7 @@ static int sof_link_afe_load(struct snd_soc_component *scomp, struct snd_sof_dai
 static int sof_link_ssp_load(struct snd_soc_component *scomp, struct snd_sof_dai_link *slink,
 			     struct sof_ipc_dai_config *config, struct snd_sof_dai *dai)
 {
+	struct snd_sof_dev *sdev = snd_soc_component_get_drvdata(scomp);
 	struct snd_soc_tplg_hw_config *hw_config = slink->hw_configs;
 	struct sof_dai_private_data *private = dai->private;
 	u32 size = sizeof(*config);
@@ -1273,6 +1274,12 @@ static int sof_link_ssp_load(struct snd_soc_component *scomp, struct snd_sof_dai
 
 		config[i].hdr.size = size;
 
+		if (sdev->mclk_id_override) {
+			dev_dbg(scomp->dev, "tplg: overriding topology mclk_id %d by quirk %d\n",
+				config[i].ssp.mclk_id, sdev->mclk_id_quirk);
+			config[i].ssp.mclk_id = sdev->mclk_id_quirk;
+		}
+
 		/* copy differentiating hw configs to ipc structs */
 		config[i].ssp.mclk_rate = le32_to_cpu(hw_config[i].mclk_rate);
 		config[i].ssp.bclk_rate = le32_to_cpu(hw_config[i].bclk_rate);
diff --git a/sound/soc/sof/sof-priv.h b/sound/soc/sof/sof-priv.h
index 823583086279..828c74bb75f8 100644
--- a/sound/soc/sof/sof-priv.h
+++ b/sound/soc/sof/sof-priv.h
@@ -594,6 +594,10 @@ struct snd_sof_dev {
 	/* to protect the ipc_rx_handler_list  and  dsp_state_handler_list list */
 	struct mutex client_event_handler_mutex;
 
+	/* quirks to override topology values */
+	bool mclk_id_override;
+	u16  mclk_id_quirk; /* same size as in IPC3 definitions */
+
 	void *private;			/* core does not touch this */
 };
 
-- 
2.35.1

[PATCH AUTOSEL 6.0 33/44] ASoC: amd: yc: Add ASUS UM5302TA into DMI table

[Sasha Levin]

From: Xiaoyan Li <lxy.lixiaoyan@gmail.com>

[ Upstream commit 4df5b13dec9e1b5a12db47ee92eb3f7da5c3deb5 ]

ASUS Zenbook S 13 OLED (UM5302TA) needs this quirk to get the built-in
microphone working properly.

Link: https://bugzilla.kernel.org/show_bug.cgi?id=216270
Signed-off-by: Xiaoyan Li <lxy.lixiaoyan@gmail.com>
Suggested-by: Mario Limonciello <mario.limonciello@amd.com>
Reviewed-by: Mario Limonciello <mario.limonciello@amd.com>
Signed-off-by: Mario Limonciello <mario.limonciello@amd.com>
Link: https://lore.kernel.org/r/20220920201436.19734-2-mario.limonciello@amd.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 sound/soc/amd/yc/acp6x-mach.c | 7 +++++++
 1 file changed, 7 insertions(+)

diff --git a/sound/soc/amd/yc/acp6x-mach.c b/sound/soc/amd/yc/acp6x-mach.c
index e0b24e1daef3..5eab3baf3573 100644
--- a/sound/soc/amd/yc/acp6x-mach.c
+++ b/sound/soc/amd/yc/acp6x-mach.c
@@ -171,6 +171,13 @@ static const struct dmi_system_id yc_acp_quirk_table[] = {
 			DMI_MATCH(DMI_PRODUCT_NAME, "21J6"),
 		}
 	},
+	{
+		.driver_data = &acp6x_card,
+		.matches = {
+			DMI_MATCH(DMI_BOARD_VENDOR, "ASUSTeK COMPUTER INC."),
+			DMI_MATCH(DMI_PRODUCT_NAME, "UM5302TA"),
+		}
+	},
 	{}
 };
 
-- 
2.35.1

[PATCH AUTOSEL 6.0 34/44] ASoC: amd: yc: Add Lenovo Yoga Slim 7 Pro X to quirks table

[Sasha Levin]

From: Mario Limonciello <mario.limonciello@amd.com>

[ Upstream commit 2232b2dd8cd4f1e6d554b2c3f6899ce36f791b67 ]

Lenovo Yoga Slim 7 Pro X has an ACP DMIC that isn't specified in the
ASL or existing quirk list.  Add it to the quirk table to let DMIC
work on these systems.

Link: https://bugzilla.kernel.org/show_bug.cgi?id=216299
Tested-by: Sebastian S <iam@decentr.al>
Reported-and-tested-by: Travis Glenn Hansen <travisghansen@yahoo.com>
Signed-off-by: Mario Limonciello <mario.limonciello@amd.com>
Link: https://lore.kernel.org/r/20220920201436.19734-3-mario.limonciello@amd.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 sound/soc/amd/yc/acp6x-mach.c | 7 +++++++
 1 file changed, 7 insertions(+)

diff --git a/sound/soc/amd/yc/acp6x-mach.c b/sound/soc/amd/yc/acp6x-mach.c
index 5eab3baf3573..2cb50d5cf1a9 100644
--- a/sound/soc/amd/yc/acp6x-mach.c
+++ b/sound/soc/amd/yc/acp6x-mach.c
@@ -171,6 +171,13 @@ static const struct dmi_system_id yc_acp_quirk_table[] = {
 			DMI_MATCH(DMI_PRODUCT_NAME, "21J6"),
 		}
 	},
+	{
+		.driver_data = &acp6x_card,
+		.matches = {
+			DMI_MATCH(DMI_BOARD_VENDOR, "LENOVO"),
+			DMI_MATCH(DMI_PRODUCT_NAME, "82"),
+		}
+	},
 	{
 		.driver_data = &acp6x_card,
 		.matches = {
-- 
2.35.1

Re: [PATCH AUTOSEL 6.0 07/44] ALSA: hda: Fix page fault in snd_hda_codec_shutdown()

[Pierre-Louis Bossart]

On 10/9/22 18:48, Sasha Levin wrote:
> From: Cezary Rojewski <cezary.rojewski@intel.com>
> 
> [ Upstream commit f2bd1c5ae2cb0cf9525c9bffc0038c12dd7e1338 ]

This commit on linux-stable seems to have broken a number of platforms.

6.0.2 worked fine.
6.0.3 does not

reverting this commit solves the problem, see
https://github.com/thesofproject/linux/issues/3960 for details.

Are we missing a prerequisite patch for this commit?


> If early probe of HDAudio bus driver fails e.g.: due to missing
> firmware file, snd_hda_codec_shutdown() ends in manipulating
> uninitialized codec->pcm_list_head causing page fault.
> 
> Initialization of HDAudio codec in ASoC is split in two:
> - snd_hda_codec_device_init()
> - snd_hda_codec_device_new()
> 
> snd_hda_codec_device_init() is called during probe_codecs() by HDAudio
> bus driver while snd_hda_codec_device_new() is called by
> codec-component's ->probe(). The second call will not happen until all
> components required by related sound card are present within the ASoC
> framework. With firmware failing to load during the PCI's deferred
> initialization i.e.: probe_work(), no platform components are ever
> registered. HDAudio codec enumeration is done at that point though, so
> the codec components became registered to ASoC framework, calling
> snd_hda_codec_device_init() in the process.
> 
> Now, during platform reboot snd_hda_codec_shutdown() is called for every
> codec found on the HDAudio bus causing oops if any of them has not
> completed both of their initialization steps. Relocating field
> initialization fixes the issue.
> 
> Reviewed-by: Kai Vehmanen <kai.vehmanen@linux.intel.com>
> Reviewed-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
> Signed-off-by: Cezary Rojewski <cezary.rojewski@intel.com>
> Link: https://lore.kernel.org/r/20220816111727.3218543-7-cezary.rojewski@intel.com
> Signed-off-by: Takashi Iwai <tiwai@suse.de>
> Signed-off-by: Sasha Levin <sashal@kernel.org>
> ---
>  sound/pci/hda/hda_codec.c | 41 +++++++++++++++++++--------------------
>  1 file changed, 20 insertions(+), 21 deletions(-)
> 
> diff --git a/sound/pci/hda/hda_codec.c b/sound/pci/hda/hda_codec.c
> index 384426d7e9dd..4ae8b9574778 100644
> --- a/sound/pci/hda/hda_codec.c
> +++ b/sound/pci/hda/hda_codec.c
> @@ -931,8 +931,28 @@ snd_hda_codec_device_init(struct hda_bus *bus, unsigned int codec_addr,
>  	}
>  
>  	codec->bus = bus;
> +	codec->depop_delay = -1;
> +	codec->fixup_id = HDA_FIXUP_ID_NOT_SET;
> +	codec->core.dev.release = snd_hda_codec_dev_release;
> +	codec->core.exec_verb = codec_exec_verb;
>  	codec->core.type = HDA_DEV_LEGACY;
>  
> +	mutex_init(&codec->spdif_mutex);
> +	mutex_init(&codec->control_mutex);
> +	snd_array_init(&codec->mixers, sizeof(struct hda_nid_item), 32);
> +	snd_array_init(&codec->nids, sizeof(struct hda_nid_item), 32);
> +	snd_array_init(&codec->init_pins, sizeof(struct hda_pincfg), 16);
> +	snd_array_init(&codec->driver_pins, sizeof(struct hda_pincfg), 16);
> +	snd_array_init(&codec->cvt_setups, sizeof(struct hda_cvt_setup), 8);
> +	snd_array_init(&codec->spdif_out, sizeof(struct hda_spdif_out), 16);
> +	snd_array_init(&codec->jacktbl, sizeof(struct hda_jack_tbl), 16);
> +	snd_array_init(&codec->verbs, sizeof(struct hda_verb *), 8);
> +	INIT_LIST_HEAD(&codec->conn_list);
> +	INIT_LIST_HEAD(&codec->pcm_list_head);
> +	INIT_DELAYED_WORK(&codec->jackpoll_work, hda_jackpoll_work);
> +	refcount_set(&codec->pcm_ref, 1);
> +	init_waitqueue_head(&codec->remove_sleep);
> +
>  	return codec;
>  }
>  EXPORT_SYMBOL_GPL(snd_hda_codec_device_init);
> @@ -985,29 +1005,8 @@ int snd_hda_codec_device_new(struct hda_bus *bus, struct snd_card *card,
>  	if (snd_BUG_ON(codec_addr > HDA_MAX_CODEC_ADDRESS))
>  		return -EINVAL;
>  
> -	codec->core.dev.release = snd_hda_codec_dev_release;
> -	codec->core.exec_verb = codec_exec_verb;
> -
>  	codec->card = card;
>  	codec->addr = codec_addr;
> -	mutex_init(&codec->spdif_mutex);
> -	mutex_init(&codec->control_mutex);
> -	snd_array_init(&codec->mixers, sizeof(struct hda_nid_item), 32);
> -	snd_array_init(&codec->nids, sizeof(struct hda_nid_item), 32);
> -	snd_array_init(&codec->init_pins, sizeof(struct hda_pincfg), 16);
> -	snd_array_init(&codec->driver_pins, sizeof(struct hda_pincfg), 16);
> -	snd_array_init(&codec->cvt_setups, sizeof(struct hda_cvt_setup), 8);
> -	snd_array_init(&codec->spdif_out, sizeof(struct hda_spdif_out), 16);
> -	snd_array_init(&codec->jacktbl, sizeof(struct hda_jack_tbl), 16);
> -	snd_array_init(&codec->verbs, sizeof(struct hda_verb *), 8);
> -	INIT_LIST_HEAD(&codec->conn_list);
> -	INIT_LIST_HEAD(&codec->pcm_list_head);
> -	refcount_set(&codec->pcm_ref, 1);
> -	init_waitqueue_head(&codec->remove_sleep);
> -
> -	INIT_DELAYED_WORK(&codec->jackpoll_work, hda_jackpoll_work);
> -	codec->depop_delay = -1;
> -	codec->fixup_id = HDA_FIXUP_ID_NOT_SET;
>  
>  #ifdef CONFIG_PM
>  	codec->power_jiffies = jiffies;

Re: [PATCH AUTOSEL 6.0 07/44] ALSA: hda: Fix page fault in snd_hda_codec_shutdown()

[Greg KH]

On Tue, Oct 25, 2022 at 09:27:32AM -0500, Pierre-Louis Bossart wrote:
> 
> 
> On 10/9/22 18:48, Sasha Levin wrote:
> > From: Cezary Rojewski <cezary.rojewski@intel.com>
> > 
> > [ Upstream commit f2bd1c5ae2cb0cf9525c9bffc0038c12dd7e1338 ]
> 
> This commit on linux-stable seems to have broken a number of platforms.
> 
> 6.0.2 worked fine.
> 6.0.3 does not
> 
> reverting this commit solves the problem, see
> https://github.com/thesofproject/linux/issues/3960 for details.
> 
> Are we missing a prerequisite patch for this commit?

Please see https://lore.kernel.org/r/20221024143931.15722-1-tiwai@suse.de

Does that solve it for you?

thanks,

greg k-h

Re: [PATCH AUTOSEL 6.0 07/44] ALSA: hda: Fix page fault in snd_hda_codec_shutdown()

[Pierre-Louis Bossart]

On 10/25/22 09:50, Greg KH wrote:
> On Tue, Oct 25, 2022 at 09:27:32AM -0500, Pierre-Louis Bossart wrote:
>>
>>
>> On 10/9/22 18:48, Sasha Levin wrote:
>>> From: Cezary Rojewski <cezary.rojewski@intel.com>
>>>
>>> [ Upstream commit f2bd1c5ae2cb0cf9525c9bffc0038c12dd7e1338 ]
>>
>> This commit on linux-stable seems to have broken a number of platforms.
>>
>> 6.0.2 worked fine.
>> 6.0.3 does not
>>
>> reverting this commit solves the problem, see
>> https://github.com/thesofproject/linux/issues/3960 for details.
>>
>> Are we missing a prerequisite patch for this commit?
> 
> Please see https://lore.kernel.org/r/20221024143931.15722-1-tiwai@suse.de
> 
> Does that solve it for you?

Yep, that's the revert I tested.