From: Mark Knecht <markknecht@attbi.com>
To: Takashi Iwai <tiwai@suse.de>
Cc: Mark Knecht <mknecht@controlnet.com>,
Alsa-Devel <alsa-devel@lists.sourceforge.net>
Subject: Re: aplay: pcm_write:1025: write error & SNDRV_PCM_IOCTL_PREPAREfailed:device or resource busy
Date: 02 Jun 2003 21:14:05 -0700 [thread overview]
Message-ID: <1054613645.1430.23.camel@Wizard.knechthome.com> (raw)
In-Reply-To: <s5hznl0o8u1.wl@alsa2.suse.de>
On Mon, 2003-06-02 at 07:25, Takashi Iwai wrote:
> just add the following line to the end of /etc/modules.conf:
>
> options snd-via82xx dxs_support=2
>
> (or dxs_support=3)
>
> and run "/etc/init.d/alsasound restart".
>
> note that the option above is available only on the very recent ALSA
> version.
A solution is found! But I'd like to understand why the other failed:
Wizard root # aplay -D hw:0,1 /home/mark/data/wave/seque~10.wav
Playing WAVE '/home/mark/data/wave/seque~10.wav' : Signed 16 bit Little
Endian, Rate 44100 Hz, Mono
And I get sound just fine...
Why is specifying the device required? As root I have no .asoundrc file,
but as a user I do:
pcm.via82xx {
type hw
card 0
}
ctl.via82xx {
type hw
card 0
}
Apparently my version is not new enough for your new option:
Wizard modules.d # /etc/init.d/alsasound restart
* Shutting down ALSA
modules.... [ ok ]
* Initialising ALSA....
* Starting sound driver: snd-via82xx Warning: ignoring dxs_support=2,
no such parameter in this module
Module snd-via82xx loaded, with
warnings [ ok ]
Wizard modules.d #
And pcm2p did not exist...
Wizard root # ls /proc/asound/card0/
ac97#0 ac97#0regs id pcm0c pcm0p pcm1c pcm1p
Wizard root #
Wizard root # aplay -v /home/mark/data/wave/seque~10.wav
Playing WAVE '/home/mark/data/wave/seque~10.wav' : Signed 16 bit Little
Endian, Rate 44100 Hz, Mono
Plug PCM: Hardware PCM card 0 'VIA 8235' device 0 subdevice 0
Its setup is:
stream : PLAYBACK
access : RW_INTERLEAVED
format : S16_LE
subformat : STD
channels : 1
rate : 44100
exact rate : 44100 (44100/1)
msbits : 16
buffer_size : 22050
period_size : 4410
period_time : 100000
tick_time : 10000
tstamp_mode : NONE
period_step : 1
sleep_min : 0
avail_min : 4410
xfer_align : 4410
start_threshold : 22050
stop_threshold : 22050
silence_threshold: 0
silence_size : 0
boundary : 1445068800
aplay: pcm_write:1025: write error: Input/output error
Wizard root #
-------------------------------------------------------
This SF.net email is sponsored by: eBay
Get office equipment for less on eBay!
http://adfarm.mediaplex.com/ad/ck/711-11697-6916-5
next prev parent reply other threads:[~2003-06-03 4:14 UTC|newest]
Thread overview: 15+ messages / expand[flat|nested] mbox.gz Atom feed top
2003-05-19 0:05 aplay: pcm_write:1025: write error & SNDRV_PCM_IOCTL_PREPAREfailed:device or resource busy Mark Knecht
2003-05-21 11:09 ` Takashi Iwai
2003-05-30 4:43 ` Mark Knecht
2003-06-02 11:11 ` Takashi Iwai
2003-06-02 13:41 ` Mark Knecht
2003-06-02 13:55 ` Takashi Iwai
2003-06-02 14:20 ` Mark Knecht
2003-06-02 14:25 ` Takashi Iwai
2003-06-02 14:33 ` Mark Knecht
2003-06-02 14:46 ` Takashi Iwai
2003-06-03 4:14 ` Mark Knecht [this message]
2003-06-02 14:35 ` Mark Knecht
2003-06-02 14:48 ` Takashi Iwai
2003-06-02 14:59 ` Mark Knecht
2003-06-02 14:49 ` David E. Storey
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1054613645.1430.23.camel@Wizard.knechthome.com \
--to=markknecht@attbi.com \
--cc=alsa-devel@lists.sourceforge.net \
--cc=mknecht@controlnet.com \
--cc=tiwai@suse.de \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox