From: Tobin Davis <tdavis@dsl-only.net>
To: Ali Shah <caffein@gmail.com>
Cc: alsa-devel@lists.sourceforge.net
Subject: Re: [Hda-intel] Toshiba U205 / HP nx6320 whitepaper
Date: Sat, 21 Oct 2006 12:00:09 -0700 [thread overview]
Message-ID: <1161457209.26400.60.camel@razman> (raw)
In-Reply-To: <6aca78dd0610210942j6eb530e7xb5bd635d8b0d920b@mail.gmail.com>
[-- Attachment #1: Type: text/plain, Size: 2168 bytes --]
Here's a wild guess. The HP patch code implies that the eapd bit
function is reversed. This patch should change that behavior to logical
norm. Test it with "model=toshiba" and let me know if there is any
improvement. If it works, I'll add your device id and submit an
official patch.
Also, post the output from "lspci -s 0:1b -vn", as this will give us the
proper sub-vendor and sub-device id's for the driver.
Tobin
On Sat, 2006-10-21 at 12:42 -0400, Ali Shah wrote:
> Hey guys,
> I am new to alsa development and I am in the midst of trying to debug
> the sound on my Toshiba Satellite u205 (no sound of the speakers, very
> very quiet sound of the headphone jack- it is an AD1981 chipset). My
> initial assumption is that the internal amplifier is not kicking in to
> boost the sound. So I have been reading the source code for the HP
> nx6320 patch to understand ALSA better and I was wondering if anyone
> would know if I could find the whitepaper for the chipset that the
> nx6320 uses (so i can figure out why certain structures are coded the
> way they are).
> So far I have tried to define new volume and mute definitions in the
> snd_kcontrol_new ad1981_mixers[] ranging from 0x00 to 0x15 to "guess
> and check" if i can some how raise the volume or unmute the amplifier
> out. However there is something wrong with this approach that is not
> working and I am not familiar with alsa enough to figure out why :).
> Attached is the results of #cat /proc/asound/card0/codec#0 for my
> codec, if anyone has any hints as to how to proceed please let me
> know!
> Ali
> -------------------------------------------------------------------------
> Using Tomcat but need to do more? Need to support web services, security?
> Get stuff done quickly with pre-integrated technology to make your job easier
> Download IBM WebSphere Application Server v.1.0.1 based on Apache Geronimo
> http://sel.as-us.falkag.net/sel?cmd=lnk&kid=120709&bid=263057&dat=121642
> _______________________________________________ Alsa-devel mailing list Alsa-devel@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/alsa-devel
--
Tobin Davis <tdavis@dsl-only.net>
[-- Attachment #2: toshiba-analog-test1.patch --]
[-- Type: text/x-patch, Size: 2315 bytes --]
diff -r d7fe584f7395 pci/hda/patch_analog.c
--- a/pci/hda/patch_analog.c Thu Oct 19 20:35:56 2006 +0200
+++ b/pci/hda/patch_analog.c Sat Oct 21 11:29:12 2006 -0700
@@ -1346,6 +1346,15 @@ static int ad1981_hp_init(struct hda_cod
return 0;
}
+/* configuration for Toshiba Laptops */
+static struct hda_verb ad1981_toshiba_init_verbs[] = {
+ {0x05, AC_VERB_SET_EAPD_BTLENABLE, 0x01 }, /* default on */
+ /* pin sensing on HP and Mic jacks */
+ {0x06, AC_VERB_SET_UNSOLICITED_ENABLE, AC_USRSP_EN | AD1981_HP_EVENT},
+ {0x08, AC_VERB_SET_UNSOLICITED_ENABLE, AC_USRSP_EN | AD1981_MIC_EVENT},
+ {}
+};
+
/* configuration for Lenovo Thinkpad T60 */
static struct snd_kcontrol_new ad1981_thinkpad_mixers[] = {
HDA_CODEC_VOLUME("Master Playback Volume", 0x05, 0x0, HDA_OUTPUT),
@@ -1386,12 +1395,17 @@ static struct hda_input_mux ad1981_think
},
};
-/* models */
-enum { AD1981_BASIC, AD1981_HP, AD1981_THINKPAD };
+/* AD1981 models */
+enum { AD1981_BASIC,
+ AD1981_HP,
+ AD1981_THINKPAD,
+ AD1981_TOSHIBA };
static struct hda_board_config ad1981_cfg_tbl[] = {
+ /* Basic AD1981 Configuration */
+ { .modelname = "basic", .config = AD1981_BASIC },
+ /* All HP models */
{ .modelname = "hp", .config = AD1981_HP },
- /* All HP models */
{ .pci_subvendor = 0x103c, .config = AD1981_HP },
{ .pci_subvendor = 0x30b0, .pci_subdevice = 0x103c,
.config = AD1981_HP }, /* HP nx6320 (reversed SSID, H/W bug) */
@@ -1400,7 +1414,8 @@ static struct hda_board_config ad1981_cf
{ .pci_subvendor = 0x17aa, .config = AD1981_THINKPAD },
{ .pci_subvendor = 0x1014, .pci_subdevice = 0x0597,
.config = AD1981_THINKPAD }, /* Z60m/t */
- { .modelname = "basic", .config = AD1981_BASIC },
+ /* Toshiba Laptops */
+ { .modelname="toshiba", .config = AD1981_TOSHIBA },
{}
};
@@ -1449,8 +1464,16 @@ static int patch_ad1981(struct hda_codec
spec->mixers[0] = ad1981_thinkpad_mixers;
spec->input_mux = &ad1981_thinkpad_capture_source;
break;
+ case AD1981_TOSHIBA:
+ spec->mixers[0] = ad1981_hp_mixers;
+ spec->num_init_verbs = 2;
+ spec->init_verbs[1] = ad1981_toshiba_init_verbs;
+ spec->multiout.dig_out_nid = 0;
+ spec->input_mux = &ad1981_hp_capture_source;
+ codec->patch_ops.init = ad1981_hp_init;
+ codec->patch_ops.unsol_event = ad1981_hp_unsol_event;
+ break;
}
-
return 0;
}
[-- Attachment #3: Type: text/plain, Size: 373 bytes --]
-------------------------------------------------------------------------
Using Tomcat but need to do more? Need to support web services, security?
Get stuff done quickly with pre-integrated technology to make your job easier
Download IBM WebSphere Application Server v.1.0.1 based on Apache Geronimo
http://sel.as-us.falkag.net/sel?cmd=lnk&kid=120709&bid=263057&dat=121642
[-- Attachment #4: Type: text/plain, Size: 161 bytes --]
_______________________________________________
Alsa-devel mailing list
Alsa-devel@lists.sourceforge.net
https://lists.sourceforge.net/lists/listinfo/alsa-devel
prev parent reply other threads:[~2006-10-21 19:00 UTC|newest]
Thread overview: 2+ messages / expand[flat|nested] mbox.gz Atom feed top
2006-10-21 16:42 [Hda-intel] Toshiba U205 / HP nx6320 whitepaper Ali Shah
2006-10-21 19:00 ` Tobin Davis [this message]
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1161457209.26400.60.camel@razman \
--to=tdavis@dsl-only.net \
--cc=alsa-devel@lists.sourceforge.net \
--cc=caffein@gmail.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox