From: Tobin Davis <tdavis@dsl-only.net>
To: Gian Jaskulski <gianfj@gmail.com>
Cc: alsa-devel@lists.sourceforge.net
Subject: Re: Asus W7j
Date: Mon, 04 Dec 2006 18:05:57 -0800 [thread overview]
Message-ID: <1165284357.32312.123.camel@razman> (raw)
In-Reply-To: <1165279947.3361.7.camel@localhost>
[-- Attachment #1.1: Type: text/plain, Size: 17302 bytes --]
Try loading the sound driver with "model=asus-laptop". If this works
for you, I'll add your system to the driver source. If not, let me know
and we can go further.
Tobin Davis
On Mon, 2006-12-04 at 22:52 -0200, Gian Jaskulski wrote:
> Dears:
>
> I am working on this nice piece for while and I can make the sound work
> using the snd-hda-intel module with the 3stack model but I can't change
> any volume and all the controls are messed up. I think it is something
> related to the sound card model (INTEL ICH7). Can anyone can help me?
>
> Thanks in advice.
>
>
> Gian.
>
> Some information above:
>
>
> Result of lspci -vn:
>
> 00:00.0 0600: 8086:27a0 (rev 03)
> Subsystem: 1043:12e7
> Flags: bus master, fast devsel, latency 0
> Capabilities: [e0] Vendor Specific Information
>
> 00:01.0 0604: 8086:27a1 (rev 03)
> Flags: bus master, fast devsel, latency 0
> Bus: primary=00, secondary=01, subordinate=01, sec-latency=0
> Memory behind bridge: f6700000-fa7fffff
> Prefetchable memory behind bridge:
> 000000009ff00000-00000000bfe00000
> Capabilities: [88] #0d [0000]
> Capabilities: [80] Power Management version 2
> Capabilities: [90] Message Signalled Interrupts: 64bit-
> Queue=0/0 Enable+
> Capabilities: [a0] Express Root Port (Slot+) IRQ 0
>
> 00:1b.0 0403: 8086:27d8 (rev 02)
> Subsystem: 1043:1253
> Flags: bus master, fast devsel, latency 0, IRQ 23
> Memory at febf8000 (64-bit, non-prefetchable) [size=16K]
> Capabilities: [50] Power Management version 2
> Capabilities: [60] Message Signalled Interrupts: 64bit+
> Queue=0/0 Enable-
> Capabilities: [70] Express Unknown type IRQ 0
>
> 00:1c.0 0604: 8086:27d0 (rev 02)
> Flags: bus master, fast devsel, latency 0
> Bus: primary=00, secondary=02, subordinate=04, sec-latency=0
> I/O behind bridge: 0000a000-0000bfff
> Memory behind bridge: fa800000-fe7fffff
> Prefetchable memory behind bridge:
> 00000000bff00000-00000000dfe00000
> Capabilities: [40] Express Root Port (Slot+) IRQ 0
> Capabilities: [80] Message Signalled Interrupts: 64bit-
> Queue=0/0 Enable+
> Capabilities: [90] #0d [0000]
> Capabilities: [a0] Power Management version 2
>
> 00:1c.1 0604: 8086:27d2 (rev 02)
> Flags: bus master, fast devsel, latency 0
> Bus: primary=00, secondary=05, subordinate=05, sec-latency=0
> I/O behind bridge: 0000c000-0000cfff
> Memory behind bridge: fe800000-fe8fffff
> Capabilities: [40] Express Root Port (Slot+) IRQ 0
> Capabilities: [80] Message Signalled Interrupts: 64bit-
> Queue=0/0 Enable+
> Capabilities: [90] #0d [0000]
> Capabilities: [a0] Power Management version 2
>
> 00:1c.2 0604: 8086:27d4 (rev 02)
> Flags: bus master, fast devsel, latency 0
> Bus: primary=00, secondary=06, subordinate=06, sec-latency=0
> Memory behind bridge: fe900000-fe9fffff
> Capabilities: [40] Express Root Port (Slot+) IRQ 0
> Capabilities: [80] Message Signalled Interrupts: 64bit-
> Queue=0/0 Enable+
> Capabilities: [90] #0d [0000]
> Capabilities: [a0] Power Management version 2
>
> 00:1d.0 0c03: 8086:27c8 (rev 02)
> Subsystem: 1043:12e7
> Flags: bus master, medium devsel, latency 0, IRQ 20
> I/O ports at e080 [size=32]
>
> 00:1d.1 0c03: 8086:27c9 (rev 02)
> Subsystem: 1043:12e7
> Flags: bus master, medium devsel, latency 0, IRQ 19
> I/O ports at e000 [size=32]
>
> 00:1d.2 0c03: 8086:27ca (rev 02)
> Subsystem: 1043:12e7
> Flags: bus master, medium devsel, latency 0, IRQ 18
> I/O ports at dc00 [size=32]
>
> 00:1d.3 0c03: 8086:27cb (rev 02)
> Subsystem: 1043:12e7
> Flags: bus master, medium devsel, latency 0, IRQ 21
> I/O ports at d880 [size=32]
>
> 00:1d.7 0c03: 8086:27cc (rev 02) (prog-if 20)
> Subsystem: 1043:12e7
> Flags: bus master, medium devsel, latency 0, IRQ 20
> Memory at febff800 (32-bit, non-prefetchable) [size=1K]
> Capabilities: [50] Power Management version 2
> Capabilities: [58] Debug port
>
> 00:1e.0 0604: 8086:2448 (rev e2) (prog-if 01)
> Flags: bus master, fast devsel, latency 0
> Bus: primary=00, secondary=07, subordinate=07, sec-latency=32
> Memory behind bridge: fea00000-feafffff
> Capabilities: [50] #0d [0000]
>
> 00:1f.0 0601: 8086:27b9 (rev 02)
> Subsystem: 1043:12e7
> Flags: bus master, medium devsel, latency 0
> Capabilities: [e0] Vendor Specific Information
>
> 00:1f.1 0101: 8086:27df (rev 02) (prog-if 8a)
> Subsystem: 1043:12e7
> Flags: bus master, medium devsel, latency 0, IRQ 18
> I/O ports at <unassigned>
> I/O ports at <unassigned>
> I/O ports at <unassigned>
> I/O ports at <unassigned>
> I/O ports at ffa0 [size=16]
>
> 00:1f.2 0101: 8086:27c4 (rev 02) (prog-if 8f)
> Subsystem: 1043:12e7
> Flags: bus master, 66MHz, medium devsel, latency 0, IRQ 19
> I/O ports at ec00 [size=8]
> I/O ports at e880 [size=4]
> I/O ports at e800 [size=8]
> I/O ports at e480 [size=4]
> I/O ports at e400 [size=16]
> Memory at febffc00 (32-bit, non-prefetchable) [size=1K]
> Capabilities: [70] Power Management version 2
>
> 01:00.0 0300: 10de:01d8 (rev a1)
> Subsystem: 1043:1211
> Flags: bus master, fast devsel, latency 0, IRQ 16
> Memory at f9000000 (32-bit, non-prefetchable) [size=16M]
> Memory at a0000000 (64-bit, prefetchable) [size=256M]
> Memory at f8000000 (64-bit, non-prefetchable) [size=16M]
> [virtual] Expansion ROM at fa7e0000 [disabled] [size=128K]
> Capabilities: [60] Power Management version 2
> Capabilities: [68] Message Signalled Interrupts: 64bit+
> Queue=0/0 Enable-
> Capabilities: [78] Express Endpoint IRQ 0
>
> 05:00.0 0200: 10ec:8168 (rev 01)
> Subsystem: 1043:11f5
> Flags: bus master, fast devsel, latency 0, IRQ 17
> I/O ports at c800 [size=256]
> Memory at fe8ff000 (64-bit, non-prefetchable) [size=4K]
> Expansion ROM at fe8e0000 [disabled] [size=64K]
> Capabilities: [40] Power Management version 2
> Capabilities: [48] Vital Product Data
> Capabilities: [50] Message Signalled Interrupts: 64bit+
> Queue=0/1 Enable-
> Capabilities: [60] Express Endpoint IRQ 0
> Capabilities: [84] Vendor Specific Information
>
> 06:00.0 0280: 8086:4222 (rev 02)
> Subsystem: 8086:1001
> Flags: bus master, fast devsel, latency 0, IRQ 18
> Memory at fe9ff000 (32-bit, non-prefetchable) [size=4K]
> Capabilities: [c8] Power Management version 2
> Capabilities: [d0] Message Signalled Interrupts: 64bit+
> Queue=0/0 Enable-
> Capabilities: [e0] Express Legacy Endpoint IRQ 0
>
> 07:03.0 0c00: 1180:0832 (prog-if 10)
> Subsystem: 1043:12e7
> Flags: bus master, medium devsel, latency 64, IRQ 21
> Memory at feaff800 (32-bit, non-prefetchable) [size=2K]
> Capabilities: [dc] Power Management version 2
>
> 07:03.1 0805: 1180:0822 (rev 19)
> Subsystem: 1043:12e7
> Flags: bus master, medium devsel, latency 64, IRQ 22
> Memory at feaff400 (32-bit, non-prefetchable) [size=256]
> Capabilities: [80] Power Management version 2
>
> 07:03.2 0880: 1180:0843 (rev 01)
> Subsystem: 1043:12e7
> Flags: bus master, medium devsel, latency 0, IRQ 3
> Memory at feaff000 (32-bit, non-prefetchable) [size=256]
> Capabilities: [80] Power Management version 2
>
> 07:03.3 0880: 1180:0592 (rev 0a)
> Subsystem: 1043:12e7
> Flags: medium devsel, IRQ 3
> Memory at feafec00 (32-bit, non-prefetchable) [size=256]
> Capabilities: [80] Power Management version 2
>
> 07:03.4 0880: 1180:0852 (rev 05)
> Subsystem: 1043:12e7
> Flags: medium devsel, IRQ 3
> Memory at feafe800 (32-bit, non-prefetchable) [size=256]
> Capabilities: [80] Power Management version 2
>
>
> Results of lspci:
> 00:00.0 Host bridge: Intel Corporation Mobile 945GM/PM/GMS/940GML and
> 945GT Express Memory Controller Hub (rev 03)
> 00:01.0 PCI bridge: Intel Corporation Mobile 945GM/PM/GMS/940GML and
> 945GT Express PCI Express Root Port (rev 03)
> 00:1b.0 Audio device: Intel Corporation 82801G (ICH7 Family) High
> Definition Audio Controller (rev 02)
> 00:1c.0 PCI bridge: Intel Corporation 82801G (ICH7 Family) PCI Express
> Port 1 (rev 02)
> 00:1c.1 PCI bridge: Intel Corporation 82801G (ICH7 Family) PCI Express
> Port 2 (rev 02)
> 00:1c.2 PCI bridge: Intel Corporation 82801G (ICH7 Family) PCI Express
> Port 3 (rev 02)
> 00:1d.0 USB Controller: Intel Corporation 82801G (ICH7 Family) USB UHCI
> #1 (rev 02)
> 00:1d.1 USB Controller: Intel Corporation 82801G (ICH7 Family) USB UHCI
> #2 (rev 02)
> 00:1d.2 USB Controller: Intel Corporation 82801G (ICH7 Family) USB UHCI
> #3 (rev 02)
> 00:1d.3 USB Controller: Intel Corporation 82801G (ICH7 Family) USB UHCI
> #4 (rev 02)
> 00:1d.7 USB Controller: Intel Corporation 82801G (ICH7 Family) USB2 EHCI
> Controller (rev 02)
> 00:1e.0 PCI bridge: Intel Corporation 82801 Mobile PCI Bridge (rev e2)
> 00:1f.0 ISA bridge: Intel Corporation 82801GBM (ICH7-M) LPC Interface
> Bridge (rev 02)
> 00:1f.1 IDE interface: Intel Corporation 82801G (ICH7 Family) IDE
> Controller (rev 02)
> 00:1f.2 IDE interface: Intel Corporation 82801GBM/GHM (ICH7 Family)
> Serial ATA Storage Controller IDE (rev 02)
> 01:00.0 VGA compatible controller: nVidia Corporation GeForce Go 7400
> (rev a1)
> 05:00.0 Ethernet controller: Realtek Semiconductor Co., Ltd.
> RTL8111/8168B PCI Express Gigabit Ethernet controller (rev 01)
> 06:00.0 Network controller: Intel Corporation PRO/Wireless 3945ABG
> Network Connection (rev 02)
> 07:03.0 FireWire (IEEE 1394): Ricoh Co Ltd Unknown device 0832
> 07:03.1 Class 0805: Ricoh Co Ltd R5C822 SD/SDIO/MMC/MS/MSPro Host
> Adapter (rev 19)
> 07:03.2 System peripheral: Ricoh Co Ltd Unknown device 0843 (rev 01)
> 07:03.3 System peripheral: Ricoh Co Ltd R5C592 Memory Stick Bus Host
> Adapter (rev 0a)
> 07:03.4 System peripheral: Ricoh Co Ltd xD-Picture Card Controller (rev
> 05)
>
>
> Results of cat /proc/asound/card0/codec*
>
> Codec: Realtek ALC660
> Address: 0
> Vendor Id: 0x10ec0861
> Subsystem Id: 0x10431205
> Revision Id: 0x100340
> Default PCM:
> rates [0x140]: 48000 96000
> bits [0xe]: 16 20 24
> formats [0x1]: PCM
> Default Amp-In caps: N/A
> Default Amp-Out caps: ofs=0x00, nsteps=0x00, stepsize=0x00, mute=1
> Node 0x03 [Audio Output] wcaps 0x405: Stereo Amp-Out
> Amp-Out caps: N/A
> Amp-Out vals: [0x00 0x00]
> Power: 0x0
> Node 0x04 [Audio Output] wcaps 0x405: Stereo Amp-Out
> Amp-Out caps: N/A
> Amp-Out vals: [0x00 0x00]
> Power: 0x0
> Node 0x05 [Audio Output] wcaps 0x405: Stereo Amp-Out
> Amp-Out caps: N/A
> Amp-Out vals: [0x00 0x00]
> Power: 0x0
> Node 0x06 [Audio Output] wcaps 0x405: Stereo Amp-Out
> Amp-Out caps: N/A
> Amp-Out vals: [0x00 0x00]
> Power: 0x0
> Node 0x07 [Audio Output] wcaps 0x605: Stereo Digital Amp-Out
> Amp-Out caps: N/A
> Amp-Out vals: [0x00 0x00]
> Power: 0x0
> Node 0x08 [Audio Input] wcaps 0x10051b: Stereo Amp-In
> Amp-In caps: ofs=0x02, nsteps=0x0d, stepsize=0x0b, mute=1
> Amp-In vals: [0x00 0x00] [0x00 0x00] [0x00 0x00] [0x00 0x00] [0x00
> 0x00] [0x00 0x00]
> PCM:
> rates [0x140]: 48000 96000
> bits [0x2]: 16
> formats [0x1]: PCM
> Power: 0x0
> Connection: 6
> 0x0d 0x0c 0x0f 0x10 0x11* 0x15
> Node 0x09 [Vendor Defined Widget] wcaps 0xf00000: Mono
> Node 0x0a [Vendor Defined Widget] wcaps 0xf00000: Mono
> Node 0x0b [Pin Complex] wcaps 0x400581: Stereo
> Pincap 0x081f: OUT HP Detect
> Pin Default 0x01214110: [Jack] HP Out at Ext Rear
> Conn = 1/8, Color = Green
> Pin-ctls: 0x40: OUT
> Power: 0x0
> Connection: 1
> 0x16
> Node 0x0c [Pin Complex] wcaps 0x400581: Stereo
> Pincap 0x0837: IN OUT Detect
> Pin Default 0x411111f0: [N/A] Speaker at Ext Rear
> Conn = 1/8, Color = Black
> Pin-ctls: 0x20: IN
> Power: 0x0
> Connection: 1
> 0x19
> Node 0x0d [Pin Complex] wcaps 0x400581: Stereo
> Pincap 0x08337: IN OUT Detect
> Pin Default 0x01a1993e: [Jack] Mic at Ext Rear
> Conn = 1/8, Color = Pink
> Pin-ctls: 0x24: IN
> Power: 0x0
> Connection: 1
> 0x18
> Node 0x0e [Pin Complex] wcaps 0x400581: Stereo
> Pincap 0x0817: OUT Detect
> Pin Default 0x411111f0: [N/A] Speaker at Ext Rear
> Conn = 1/8, Color = Black
> Pin-ctls: 0x00:
> Power: 0x0
> Connection: 1
> 0x19
> Node 0x0f [Pin Complex] wcaps 0x400581: Stereo
> Pincap 0x0833f: IN OUT HP Detect
> Pin Default 0x411111f0: [N/A] Speaker at Ext Rear
> Conn = 1/8, Color = Black
> Pin-ctls: 0xc0: OUT HP
> Power: 0x0
> Connection: 1
> 0x1a
> Node 0x10 [Pin Complex] wcaps 0x400581: Stereo
> Pincap 0x0833f: IN OUT HP Detect
> Pin Default 0x411111f0: [N/A] Speaker at Ext Rear
> Conn = 1/8, Color = Black
> Pin-ctls: 0x24: IN
> Power: 0x0
> Connection: 1
> 0x1b
> Node 0x11 [Pin Complex] wcaps 0x400001: Stereo
> Pincap 0x0863: IN
> Pin Default 0x99330130: [Fixed] CD at Int ATAPI
> Conn = ATAPI, Color = Unknown
> Pin-ctls: 0x00:
> Node 0x12 [Pin Complex] wcaps 0x400301: Stereo Digital
> Pincap 0x0810: OUT
> Pin Default 0x99430120: [Fixed] SPDIF Out at Int ATAPI
> Conn = ATAPI, Color = Unknown
> Pin-ctls: 0x40: OUT
> Connection: 1
> 0x07
> Node 0x13 [Vendor Defined Widget] wcaps 0xf00000: Mono
> Node 0x14 [Audio Mixer] wcaps 0x20010b: Stereo Amp-In
> Amp-In caps: ofs=0x00, nsteps=0x00, stepsize=0x00, mute=1
> Amp-In vals: [0x00 0x00] [0x00 0x00]
> Connection: 2
> 0x0d 0x10
> Node 0x15 [Audio Mixer] wcaps 0x20050f: Stereo Amp-In Amp-Out
> Amp-In caps: ofs=0x0c, nsteps=0x17, stepsize=0x0b, mute=1
> Amp-In vals: [0x11 0x11] [0x80 0x80] [0x00 0x00]
> Amp-Out caps: ofs=0x0c, nsteps=0x0c, stepsize=0x0b, mute=1
> Amp-Out vals: [0x0c 0x0c]
> Power: 0x0
> Connection: 3
> 0x11 0x14 0x1c
> Node 0x16 [Audio Mixer] wcaps 0x20010b: Stereo Amp-In
> Amp-In caps: ofs=0x00, nsteps=0x00, stepsize=0x00, mute=1
> Amp-In vals: [0x00 0x00] [0x00 0x00]
> Connection: 2
> 0x03 0x15
> Node 0x17 [Audio Mixer] wcaps 0x20010b: Stereo Amp-In
> Amp-In caps: ofs=0x00, nsteps=0x00, stepsize=0x00, mute=1
> Amp-In vals: [0x00 0x00] [0x00 0x00]
> Connection: 2
> 0x04 0x15
> Node 0x18 [Audio Mixer] wcaps 0x20010b: Stereo Amp-In
> Amp-In caps: ofs=0x00, nsteps=0x00, stepsize=0x00, mute=1
> Amp-In vals: [0x00 0x00] [0x00 0x00]
> Connection: 2
> 0x05 0x15
> Node 0x19 [Audio Mixer] wcaps 0x20010b: Stereo Amp-In
> Amp-In caps: ofs=0x00, nsteps=0x00, stepsize=0x00, mute=1
> Amp-In vals: [0x00 0x00] [0x00 0x00]
> Connection: 2
> 0x06 0x15
> Node 0x1a [Audio Mixer] wcaps 0x20010b: Stereo Amp-In
> Amp-In caps: ofs=0x00, nsteps=0x00, stepsize=0x00, mute=1
> Amp-In vals: [0x80 0x80] [0x80 0x80] [0x00 0x00] [0x00 0x00]
> Connection: 4
> 0x04 0x06 0x15 0x03
> Node 0x1b [Audio Mixer] wcaps 0x20010b: Stereo Amp-In
> Amp-In caps: ofs=0x00, nsteps=0x00, stepsize=0x00, mute=1
> Amp-In vals: [0x80 0x80] [0x80 0x80] [0x80 0x80] [0x80 0x80]
> Connection: 4
> 0x04 0x06 0x15 0x03
> Node 0x1c [Audio Mixer] wcaps 0x20010b: Stereo Amp-In
> Amp-In caps: ofs=0x00, nsteps=0x00, stepsize=0x00, mute=1
> Amp-In vals: [0x00 0x00] [0x00 0x00]
> Connection: 2
> 0x0c 0x0f
> Node 0x1d [Vendor Defined Widget] wcaps 0xf00000: Mono
> Node 0x1e [Vendor Defined Widget] wcaps 0xf00000: Mono
> Node 0x1f [Pin Complex] wcaps 0x400581: Stereo
> Pincap 0x0817: OUT Detect
> Pin Default 0x411111f0: [N/A] Speaker at Ext Rear
> Conn = 1/8, Color = Black
> Pin-ctls: 0x00:
> Power: 0x0
> Connection: 1
> 0x18
> Node 0x20 [Pin Complex] wcaps 0x400581: Stereo
> Pincap 0x0817: OUT Detect
> Pin Default 0x411111f0: [N/A] Speaker at Ext Rear
> Conn = 1/8, Color = Black
> Pin-ctls: 0x00:
> Power: 0x0
> Connection: 1
> 0x17
> Node 0x21 [Vendor Defined Widget] wcaps 0xf00000: Mono
> Node 0x22 [Vendor Defined Widget] wcaps 0xf00000: Mono
> Node 0x23 [Beep Generator Widget] wcaps 0x70000c: Mono Amp-Out
> Amp-Out caps: ofs=0x0f, nsteps=0x0f, stepsize=0x0b, mute=1
> Amp-Out vals: [0x8f]
> Codec: Motorola Si3054
> Address: 1
> Vendor Id: 0x10573055
> Subsystem Id: 0x104310c6
> Revision Id: 0x100700
>
>
>
>
> -------------------------------------------------------------------------
> Take Surveys. Earn Cash. Influence the Future of IT
> Join SourceForge.net's Techsay panel and you'll get the chance to share your
> opinions on IT & business topics through brief surveys - and earn cash
> http://www.techsay.com/default.php?page=join.php&p=sourceforge&CID=DEVDEV
> _______________________________________________
> Alsa-devel mailing list
> Alsa-devel@lists.sourceforge.net
> https://lists.sourceforge.net/lists/listinfo/alsa-devel
--
Tobin Davis <tdavis@dsl-only.net>
[-- Attachment #1.2: Type: text/html, Size: 28805 bytes --]
[-- Attachment #2: Type: text/plain, Size: 347 bytes --]
-------------------------------------------------------------------------
Take Surveys. Earn Cash. Influence the Future of IT
Join SourceForge.net's Techsay panel and you'll get the chance to share your
opinions on IT & business topics through brief surveys - and earn cash
http://www.techsay.com/default.php?page=join.php&p=sourceforge&CID=DEVDEV
[-- Attachment #3: Type: text/plain, Size: 161 bytes --]
_______________________________________________
Alsa-devel mailing list
Alsa-devel@lists.sourceforge.net
https://lists.sourceforge.net/lists/listinfo/alsa-devel
next prev parent reply other threads:[~2006-12-05 2:05 UTC|newest]
Thread overview: 4+ messages / expand[flat|nested] mbox.gz Atom feed top
2006-12-05 0:52 Asus W7j Gian Jaskulski
2006-12-05 2:05 ` Tobin Davis [this message]
2006-12-05 11:58 ` Gian Jaskulski
2006-12-05 12:17 ` Gian Jaskulski
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1165284357.32312.123.camel@razman \
--to=tdavis@dsl-only.net \
--cc=alsa-devel@lists.sourceforge.net \
--cc=gianfj@gmail.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox