From: Tobin Davis <tdavis@dsl-only.net>
To: "Allyn, Mark A" <mark.a.allyn@intel.com>
Cc: alsa-devel@alsa-project.org
Subject: Re: Samsung Audio Problem (update)
Date: Thu, 07 Dec 2006 15:24:22 -0800 [thread overview]
Message-ID: <1165533862.7530.53.camel@razman> (raw)
In-Reply-To: <5FD5754DDBA0B1499B5A0B4BB54194852FFD0A@fmsmsx411.amr.corp.intel.com>
[-- Attachment #1.1: Type: text/plain, Size: 12406 bytes --]
Could you send the new dmesg output as well as the output from
cat /proc/asound/card0/codec#0? I'm assuming you compiled the driver
with "--with-debug=detect"? I need to see what the driver reports after
loading.
Thanks,
Tobin
On Thu, 2006-12-07 at 14:03 -0800, Allyn, Mark A wrote:
> Tobin:
>
> I did apply the patch as you suggest. The dmesg from the modprobe of the
> snd-hda-intel does show
> the ultra (Samsung) loading. However, there is still no recording. I set
> all of the sliders on
> 100 percent and I made sure that the capture is on both mike and
> capture. Audio playback of
> existing audio files is okay.
>
> Mark
>
> ________________________________
>
> From: Tobin Davis [mailto:tdavis@dsl-only.net]
> Sent: Wednesday, December 06, 2006 3:31 PM
> To: Allyn, Mark A
> Cc: alsa-devel@lists.sourceforge.net
> Subject: RE: [Alsa-devel] Samsung Audio Problem (update)
>
>
> Mark,
> After looking through the documentation and the Windows regestry
> settings for that system's driver, I found some interesting differences
> to the microphone selector.
>
> Try this patch against the alsa-driver-hg20061130 snapshot
> (ftp://ftp.suse.com/pub/projects/alsa/snapshot/driver/alsa-driver-hg2006
> 1129.tar.bz2).
>
> To apply:
> tar -jxvf alsa-driver-hg20061130.tar.bz2
> cd alsa-driver-hg20061130/alsa-kernel
> patch -p1 <SamsungQ1.patch
> cd ..
> ./configure --with-cards=hda-intel --with-debug=detect ; make ; make
> install
>
> Let me know if this fixes your microphone. I also added the subdevice
> id so you shouldn't need to add any model parameters.
>
> Tobin
>
> On Tue, 2006-12-05 at 10:46 -0800, Allyn, Mark A wrote:
>
> Tobin:
>
> Here is the result of the debug=detect & codec#0:
>
> =====================================================
>
> [17179640.512000] PCI: Setting latency timer of device
> 0000:00:1b.0 to
> 64
> [17179640.544000] ALSA
> /mnt1/src/asianux/BUILD/alsa-driver-hg20061130/pci/hda/../..
> /alsa-kernel/pci/hda/hda_intel.c:696:
> codec_mask
> = 0x1
> [17179640.740000] ALSA
>
> /mnt1/src/asianux/BUILD/alsa-driver-hg20061130/pci/hda/hda_codec.c:1743:
>
> hda_codec: model 'laptop-eapd' is
> selected
>
>
> ========================================================================
> output of codec#0
> Codec: Analog Devices AD1986A
> Address: 0
> Vendor Id: 0x11d41986
> Subsystem Id: 0x144dc027
> Revision Id: 0x100500
> Default PCM:
> rates [0x7f]: 8000 11025 16000 22050 32000 44100 48000
> bits [0xe]: 16 20 24
> formats [0x1]: PCM
> Default Amp-In caps: ofs=0x00, nsteps=0x00, stepsize=0x00,
> mute=1
> Default Amp-Out caps: ofs=0x1f, nsteps=0x1f, stepsize=0x05,
> mute=1
> Node 0x02 [Audio Output] wcaps 0x30311: Stereo Digital
> PCM:
> rates [0x60]: 44100 48000
> bits [0x2]: 16
> formats [0x5]: PCM AC3
> Connection: 2
> 0x01* 0x06
> Node 0x03 [Audio Output] wcaps 0x44d: Stereo Amp-Out
> Amp-Out caps: ofs=0x17, nsteps=0x1f, stepsize=0x05, mute=1
> Amp-Out vals: [0x80 0x80]
> Power: 0x0
> Node 0x04 [Audio Output] wcaps 0x40d: Stereo Amp-Out
> Amp-Out caps: ofs=0x17, nsteps=0x1f, stepsize=0x05, mute=1
> Amp-Out vals: [0x80 0x80]
> Power: 0x0
> Node 0x05 [Audio Output] wcaps 0x40d: Stereo Amp-Out
> Amp-Out caps: ofs=0x17, nsteps=0x1f, stepsize=0x05, mute=1
> Amp-Out vals: [0x80 0x80]
> Power: 0x0
> Node 0x06 [Audio Input] wcaps 0x100511: Stereo
> PCM:
> rates [0x7f]: 8000 11025 16000 22050 32000 44100 48000
> bits [0x6]: 16 20
> formats [0x1]: PCM
> Power: 0x0
> Connection: 1
> 0x12
> Node 0x07 [Audio Mixer] wcaps 0x200101: Stereo
> Connection: 8
> 0x03 0x09 0x13 0x14 0x15 0x16 0x17 0x18
> Node 0x08 [Audio Mixer] wcaps 0x200100: Mono
> Connection: 1
> 0x07
> Node 0x09 [Audio Mixer] wcaps 0x20010e: Mono Amp-In Amp-Out
> Amp-In caps: ofs=0x00, nsteps=0x00, stepsize=0x00, mute=1
> Amp-In vals: [0x80] [0x80]
> Amp-Out caps: ofs=0x00, nsteps=0x00, stepsize=0x00, mute=1
> Amp-Out vals: [0x80]
> Connection: 2
> 0x04 0x05
> Node 0x0a [Audio Selector] wcaps 0x300101: Stereo
> Connection: 3
> 0x07* 0x04 0x05
> Node 0x0b [Audio Selector] wcaps 0x300101: Stereo
> Connection: 2
> 0x07* 0x04
> Node 0x0c [Audio Selector] wcaps 0x300101: Stereo
> Connection: 2
> 0x04* 0x07
> Node 0x0d [Audio Selector] wcaps 0x300101: Stereo
> Connection: 2
> 0x05* 0x08
> Node 0x0e [Audio Selector] wcaps 0x300100: Mono
> Connection: 2
> 0x08* 0x11
> Node 0x0f [Audio Selector] wcaps 0x30010d: Stereo Amp-Out
> Amp-Out caps: ofs=0x00, nsteps=0x03, stepsize=0x27, mute=0
> Amp-Out vals: [0x00 0x00]
> Connection: 8
> 0x1f* 0x20 0x1d 0x1d 0x27 0x28 0x29 0x2a
> Node 0x10 [Audio Selector] wcaps 0x300101: Stereo
> Connection: 3
> 0x20* 0x1c 0x1f
> Node 0x11 [Audio Selector] wcaps 0x300941: Stereo
> Connection: 2
> 0x0f* 0x2b
> Node 0x12 [Audio Selector] wcaps 0x30010d: Stereo Amp-Out
> Amp-Out caps: ofs=0x00, nsteps=0x0f, stepsize=0x05, mute=1
> Amp-Out vals: [0x80 0x80]
> Connection: 8
> 0x11* 0x22 0x00 0x21 0x10 0x07 0x08 0x23
> Node 0x13 [Audio Selector] wcaps 0x30010d: Stereo Amp-Out
> Amp-Out caps: ofs=0x17, nsteps=0x1f, stepsize=0x05, mute=1
> Amp-Out vals: [0x80 0x80]
> Connection: 1
> 0x11
> Node 0x14 [Audio Selector] wcaps 0x30010c: Mono Amp-Out
> Amp-Out caps: ofs=0x17, nsteps=0x1f, stepsize=0x05, mute=1
> Amp-Out vals: [0x80]
> Connection: 1
> 0x23
> Node 0x15 [Audio Selector] wcaps 0x30010d: Stereo Amp-Out
> Amp-Out caps: ofs=0x17, nsteps=0x1f, stepsize=0x05, mute=1
> Amp-Out vals: [0x80 0x80]
> Connection: 1
> 0x22
> Node 0x16 [Audio Selector] wcaps 0x30010d: Stereo Amp-Out
> Amp-Out caps: ofs=0x17, nsteps=0x1f, stepsize=0x05, mute=1
> Amp-Out vals: [0x80 0x80]
> Connection: 1
> 0x21
> Node 0x17 [Audio Selector] wcaps 0x30010d: Stereo Amp-Out
> Amp-Out caps: ofs=0x17, nsteps=0x1f, stepsize=0x05, mute=1
> Amp-Out vals: [0x80 0x80]
> Connection: 1
> 0x10
> Node 0x18 [Audio Selector] wcaps 0x30010c: Mono Amp-Out
> Amp-Out caps: ofs=0x0f, nsteps=0x0f, stepsize=0x0b, mute=1
> Amp-Out vals: [0x8f]
> Connection: 2
> 0x19* 0x24
> Node 0x19 [Beep Generator Widget] wcaps 0x700000: Mono
> Node 0x1a [Pin Complex] wcaps 0x400185: Stereo Amp-Out
> Amp-Out caps: ofs=0x1f, nsteps=0x1f, stepsize=0x05, mute=1
> Amp-Out vals: [0x80 0x80]
> Pincap 0x081f: OUT HP Detect
> Pin Default 0x02214021: [Jack] HP Out at Ext Front
> Conn = 1/8, Color = Green
> Pin-ctls: 0xc0: OUT HP
> Connection: 1
> 0x0a
> Node 0x1b [Pin Complex] wcaps 0x400185: Stereo Amp-Out
> Amp-Out caps: ofs=0x1f, nsteps=0x1f, stepsize=0x05, mute=1
> Amp-Out vals: [0x80 0x80]
> Pincap 0x081001f: OUT HP EAPD Detect
> Pin Default 0x01014011: [Jack] Line Out at Ext Rear
> Conn = 1/8, Color = Green
> Pin-ctls: 0x40: OUT
> Connection: 1
> 0x0b
> Node 0x1c [Pin Complex] wcaps 0x400185: Stereo Amp-Out
> Amp-Out caps: ofs=0x1f, nsteps=0x1f, stepsize=0x05, mute=1
> Amp-Out vals: [0x80 0x80]
> Pincap 0x0837: IN OUT Detect
> Pin Default 0x41013012: [N/A] Line Out at Ext Rear
> Conn = 1/8, Color = Blue
> Pin-ctls: 0x40: OUT
> Connection: 1
> 0x0c
> Node 0x1d [Pin Complex] wcaps 0x400985: Stereo Amp-Out
> Amp-Out caps: ofs=0x1f, nsteps=0x1f, stepsize=0x05, mute=1
> Amp-Out vals: [0x80 0x80]
> Pincap 0x081737: IN OUT Detect
> Pin Default 0x01019015: [Jack] Line Out at Ext Rear
> Conn = 1/8, Color = Pink
> Pin-ctls: 0x40: OUT
> Connection: 1
> 0x0d
> Node 0x1e [Pin Complex] wcaps 0x400104: Mono Amp-Out
> Amp-Out caps: ofs=0x1f, nsteps=0x1f, stepsize=0x05, mute=1
> Amp-Out vals: [0x80]
> Pincap 0x0810: OUT
> Pin Default 0x511710f0: [N/A] Speaker at Int Rear
> Conn = Analog, Color = Black
> Pin-ctls: 0x40: OUT
> Connection: 1
> 0x0e
> Node 0x1f [Pin Complex] wcaps 0x400081: Stereo
> Pincap 0x081727: IN Detect
> Pin Default 0x02a190f0: [Jack] Mic at Ext Front
> Conn = 1/8, Color = Pink
> Pin-ctls: 0x24: IN
> Node 0x20 [Pin Complex] wcaps 0x400081: Stereo
> Pincap 0x081727: IN Detect
> Pin Default 0x418130f0: [N/A] Line In at Ext Rear
> Conn = 1/8, Color = Blue
> Pin-ctls: 0x20: IN
> Node 0x21 [Pin Complex] wcaps 0x400081: Stereo
> Pincap 0x0827: IN Detect
> Pin Default 0x5997e0f0: [N/A] Aux at Int ATAPI
> Conn = Analog, Color = White
> Pin-ctls: 0x20: IN
> Node 0x22 [Pin Complex] wcaps 0x400001: Stereo
> Pincap 0x0820: IN
> Pin Default 0x593310f0: [N/A] CD at Int ATAPI
> Conn = ATAPI, Color = Black
> Pin-ctls: 0x20: IN
> Node 0x23 [Pin Complex] wcaps 0x400000: Mono
> Pincap 0x0820: IN
> Pin Default 0x59b770f0: [N/A] Telephony at Int ATAPI
> Conn = Analog, Color = Yellow
> Pin-ctls: 0x20: IN
> Node 0x24 [Pin Complex] wcaps 0x400000: Mono
> Pincap 0x0820: IN
> Pin Default 0x51f710f0: [N/A] Other at Int Rear
> Conn = Analog, Color = Black
> Pin-ctls: 0x20: IN
> Node 0x25 [Pin Complex] wcaps 0x400301: Stereo Digital
> Pincap 0x0810: OUT
> Pin Default 0x4145f0f0: [N/A] SPDIF Out at Ext Rear
> Conn = Optical, Color = Other
> Pin-ctls: 0x40: OUT
> Connection: 1
> 0x02
> Node 0x26 [Power Widget] wcaps 0x500500: Mono
> Power: 0x0
> Connection: 8
> 0x07* 0x08 0x13 0x14 0x15 0x16 0x17 0x18
> Node 0x27 [Audio Mixer] wcaps 0x200101: Stereo
> Connection: 2
> 0x1f 0x1d
> Node 0x28 [Audio Mixer] wcaps 0x200101: Stereo
> Connection: 2
> 0x1f 0x20
> Node 0x29 [Audio Mixer] wcaps 0x200101: Stereo
> Connection: 2
> 0x1d 0x20
> Node 0x2a [Audio Mixer] wcaps 0x200101: Stereo
> Connection: 3
> 0x1f 0x1d 0x20
> Node 0x2b [Audio Mixer] wcaps 0x200100: Mono
> Connection: 1
> 0x0f
>
> ======================================================
>
> ________________________________
>
> From: Tobin Davis [mailto:tdavis@dsl-only.net]
> Sent: Tuesday, December 05, 2006 7:26 AM
> To: Allyn, Mark A
> Cc: alsa-devel@lists.sourceforge.net
> Subject: Re: [Alsa-devel] Samsung Audio Problem (update)
>
>
> Could you send a couple of things to the mailing list?
> Specifically,
> recompile the driver with "--with-debug=detect", reinstall it,
> and send
> the output from dmesg after installing the driver. Also, send
> the
> output from 'cat /proc/asound/card0/codec*'.
>
> I have a laptop (Asus Z62F) with the exact same codec, and I
> had to do
> some fiddling with the alsamixer controls before I could use
> either the
> internal mic or the external mic. You might also check that.
> The mic
> gain is listed as an output for some reason (it's been marked as
> "fixme"
> in the code for quite some time).
>
> Tobin
>
> On Mon, 2006-12-04 at 13:43 -0800, Allyn, Mark A wrote:
>
> Hello:
>
> With thanks to Tobin Davis, I was able to resolve part
> of my
> problem.
>
> With using the latest snapshot of the alsa driver as
> well as
> adding
>
> options snd-hda-intel model=laptop-eapd
>
> to the /etc/modprobe.conf file, I was able to get rid of
> the
> high
> pitched
> squeal and have proper audio playback on the internal
> speakers.
>
> I am still unable to record. For your benefit, I do have
> some
> more
> Information on the audio device. From the lspci -qn, I
> got:
>
> Class: 0403
> 8086:2668 rev03
> Subsystem: 144D:C027
>
> Has anyone got audio recording working on this codec and
> subsystem?
>
> Thank you
>
> Mark Allyn
>
>
>
> ------------------------------------------------------------------------
> -
> Take Surveys. Earn Cash. Influence the Future of IT
> Join SourceForge.net's Techsay panel and you'll get the
> chance
> to share your
> opinions on IT & business topics through brief surveys -
> and
> earn cash
>
>
> http://www.techsay.com/default.php?page=join.php&p=sourceforge&CID=DEVDE
> V
> _______________________________________________
> Alsa-devel mailing list
> Alsa-devel@lists.sourceforge.net
> https://lists.sourceforge.net/lists/listinfo/alsa-devel
>
>
>
>
--
Tobin Davis <tdavis@dsl-only.net>
[-- Attachment #1.2: Type: text/html, Size: 23274 bytes --]
[-- Attachment #2: Type: text/plain, Size: 347 bytes --]
-------------------------------------------------------------------------
Take Surveys. Earn Cash. Influence the Future of IT
Join SourceForge.net's Techsay panel and you'll get the chance to share your
opinions on IT & business topics through brief surveys - and earn cash
http://www.techsay.com/default.php?page=join.php&p=sourceforge&CID=DEVDEV
[-- Attachment #3: Type: text/plain, Size: 161 bytes --]
_______________________________________________
Alsa-devel mailing list
Alsa-devel@lists.sourceforge.net
https://lists.sourceforge.net/lists/listinfo/alsa-devel
next parent reply other threads:[~2006-12-07 23:24 UTC|newest]
Thread overview: 6+ messages / expand[flat|nested] mbox.gz Atom feed top
[not found] <5FD5754DDBA0B1499B5A0B4BB54194852FFD0A@fmsmsx411.amr.corp.intel.com>
2006-12-07 23:24 ` Tobin Davis [this message]
2006-12-07 23:52 Samsung Audio Problem (update) Allyn, Mark A
-- strict thread matches above, loose matches on Subject: below --
2006-12-05 18:46 Allyn, Mark A
2006-12-06 23:31 ` Tobin Davis
2006-12-04 21:43 Allyn, Mark A
2006-12-05 15:26 ` Tobin Davis
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1165533862.7530.53.camel@razman \
--to=tdavis@dsl-only.net \
--cc=alsa-devel@alsa-project.org \
--cc=mark.a.allyn@intel.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox