Alsa-Devel Archive on lore.kernel.org
 help / color / mirror / Atom feed
From: Tobin Davis <tdavis@dsl-only.net>
To: risc@volumehost.com
Cc: alsa-devel@lists.sourceforge.net
Subject: Re: BUG in >=1.0.13rc1
Date: Wed, 27 Dec 2006 14:32:36 -0800	[thread overview]
Message-ID: <1167258756.9563.45.camel@localhost> (raw)
In-Reply-To: <20061227220022.GB28449@volumehost.com>


[-- Attachment #1.1: Type: text/plain, Size: 6288 bytes --]

Could you send some more information?  What I'd like to see is the
output from "lspci -s 0:14.2 -vn" and "cat /proc/asound/card0/codec*".

It appears that you have a problem similar to one I'm working on for a
new codec (which hasn't been added to the alsa tree yet).  This might
help me fix that issue and yours as well.

Thanks,

Tobin Davis

On Wed, 2006-12-27 at 16:00 -0600, risc@volumehost.com wrote:

> I own a toshiba L35 laptop, with a ATI SB450 sound card in it.
> 
> This card functions "adequately" with alsa 1.0.12.
> it gets the "
> ALSA /usr/src/alsa-driver-1.0.12/pci/hda/hda_codec.c:213: hda_codec: invalid dep_range_val 0:7fff
> " errors scrolling off the screen, as reported by others,
> and plays through the speakers only. this laptop has a mic (untested) and a headphone jack. plugging headphones in does stop the speakers, but dosent produce sound through the headphones.
> 
> however, switching to 1.0.13rc1 or newer (tried up to 1.0.14rc1) causes a kernel panic right after those errors stop.
> sound does not function in these versions.
> 
> I've tried the disable_msi=1 option, however, i was not getting a "nobody cared" message before, and turning this option on does nothing.
> So, i'm thinking this dosent have to do with the MSI changes recently.
> 
> the panic is as follows:
> BUG: unable to handle kernel NULL pointer dereference at virtual address 00000000
>  printing eip:
> f8b7b4e8
> *pde = 00000000
> Oops: 0002 [#1]
> SMP 
> Modules linked in: snd_hda_intel snd_hda_codec snd_pcm_oss snd_mixer_oss snd_pcm snd_timer snd soundcore snd_page_alloc nfs nfsd exportfs lockd nfs_acl sunrpc ipv6 dm_snapshot dm_mirror dm_mod usbhid uhci_hcd usbkbd orinoco_cs orinoco hermes tsdev joydev pcmcia firmware_class yenta_socket rsrc_nonstatic pcmcia_core i2c_piix4 shpchp pci_hotplug psmouse ati_agp agpgart i2c_core evdev serio_raw pcspkr rtc ext3 jbd mbcache ide_cd cdrom 8139cp sd_mod 8139too mii atiixp ehci_hcd ohci_hcd sata_sil usbcore libata scsi_mod generic ide_core thermal processor fan
> CPU:    0
> EIP:    0060:[<f8b7b4e8>]    Not tainted VLI
> EFLAGS: 00010202   (2.6.18 #1) 
> EIP is at get_input_type+0x67/0x85 [snd_hda_codec]
> eax: 00000007   ebx: dfd169c0   ecx: 00000001   edx: 00000000
> esi: 00000000   edi: f8b836c5   ebp: f7bce880   esp: f5017d3c
> ds: 007b   es: 007b   ss: 0068
> Process modprobe (pid: 2367, ti=f5016000 task=f75ba000 task.ti=f5016000)
> Stack: 00000001 f8b7bea2 0000032d dfd16a40 dfd169c0 dfd169e4 f50e2800 00000000 
>        00000286 00000000 ffffe000 f5017d84 f5746ec0 00010000 00000002 c01b769c 
>        f57468c0 c0185edb 0000032d 00008000 f57468c0 c0186316 f5746ec0 f5746940 
> Call Trace:
>  [<f8b7bea2>] build_generic_controls+0x1ed/0x2c9 [snd_hda_codec]
>  [<c01b769c>] idr_get_new+0xa/0x26
>  [<c0185edb>] proc_register+0x6e/0xfa
>  [<c0186316>] create_proc_entry+0x87/0x9a
>  [<f8a43757>] snd_create_proc_entry+0x8/0x14 [snd]
>  [<f8a437fd>] snd_info_register+0x9a/0x9f [snd]
>  [<f8b3eef1>] snd_pcm_lib_preallocate_pages+0xbf/0xd8 [snd_pcm]
>  [<f8b3ef39>] snd_pcm_lib_preallocate_pages_for_all+0x2f/0x4c [snd_pcm]
>  [<f8a54a9d>] create_codec_pcm+0xd8/0xf5 [snd_hda_intel]
>  [<f8b7b0e0>] snd_hda_build_controls+0x16/0x67 [snd_hda_codec]
>  [<f8a55311>] azx_probe+0x71d/0x72f [snd_hda_intel]
>  [<f8a54604>] azx_send_cmd+0x0/0xd6 [snd_hda_intel]
>  [<f8a54504>] azx_get_response+0x0/0x100 [snd_hda_intel]
>  [<c01c1420>] pci_match_device+0x10/0xac
>  [<c02107d4>] __driver_attach+0x0/0x5d
>  [<c01c1508>] pci_device_probe+0x36/0x57
>  [<c0210735>] driver_probe_device+0x42/0x8b
>  [<c021080c>] __driver_attach+0x38/0x5d
>  [<c0210256>] bus_for_each_dev+0x33/0x55
>  [<c021069f>] driver_attach+0x11/0x13
>  [<c02107d4>] __driver_attach+0x0/0x5d
>  [<c020ff6f>] bus_add_driver+0x64/0xfd
>  [<c01c1644>] __pci_register_driver+0x47/0x63
>  [<c01358f5>] sys_init_module+0x16c3/0x1846
>  [<c0102c7b>] syscall_call+0x7/0xb
> Code: f9 02 b8 4c 35 b8 f8 eb 17 ba 51 35 b8 f8 eb 35 83 e1 0f ba 54 35 b8 f8 83 f9 02 b8 5e 35 b8 f8 0f 45 d0 eb 20 f6 43 15 10 74 03 <83> 0a 04 83 e1 0f ba 62 35 b8 f8 83 f9 02 b8 6c 35 b8 f8 eb e0 
> EIP: [<f8b7b4e8>] get_input_type+0x67/0x85 [snd_hda_codec] SS:ESP 0068:f5017d3c
> 
> lspci is as follows:
> 00:00.0 Host bridge: ATI Technologies Inc Unknown device 5a31 (rev 01)
> 00:01.0 PCI bridge: ATI Technologies Inc RS480 PCI Bridge
> 00:12.0 IDE interface: ATI Technologies Inc ATI 4379 Serial ATA Controller (rev 80)
> 00:13.0 USB Controller: ATI Technologies Inc IXP SB400 USB Host Controller (rev 80)
> 00:13.1 USB Controller: ATI Technologies Inc IXP SB400 USB Host Controller (rev 80)
> 00:13.2 USB Controller: ATI Technologies Inc IXP SB400 USB2 Host Controller (rev 80)
> 00:14.0 SMBus: ATI Technologies Inc IXP SB400 SMBus Controller (rev 82)
> 00:14.1 IDE interface: ATI Technologies Inc Standard Dual Channel PCI IDE Controller ATI (rev 80)
> 00:14.2 Audio device: ATI Technologies Inc SB450 HDA Audio (rev 01)
> 00:14.3 ISA bridge: ATI Technologies Inc IXP SB400 PCI-ISA Bridge (rev 80)
> 00:14.4 PCI bridge: ATI Technologies Inc IXP SB400 PCI-PCI Bridge (rev 80)
> 01:05.0 VGA compatible controller: ATI Technologies Inc RC410 [Radeon Xpress 200M]
> 09:01.0 CardBus bridge: ENE Technology Inc CB1410 Cardbus Controller (rev 01)
> 09:02.0 Ethernet controller: Realtek Semiconductor Co., Ltd. RTL-8139/8139C/8139C+ (rev 10)
> 09:04.0 CardBus bridge: Texas Instruments PCI1410 PC card Cardbus Controller (rev 01)
> (ignore the second TI cardbus controller, its a replacement wireless card)
> 
> the kernel .config is stolen from debian's 2.6.18-3-686 package, and the source is debian's linux-source-2.6.18.
> 
> i'm on list for the duration of this issue.
> 
> Julia Longtin <risc@volumehost.com>
> 
> -------------------------------------------------------------------------
> Take Surveys. Earn Cash. Influence the Future of IT
> Join SourceForge.net's Techsay panel and you'll get the chance to share your
> opinions on IT & business topics through brief surveys - and earn cash
> http://www.techsay.com/default.php?page=join.php&p=sourceforge&CID=DEVDEV
> _______________________________________________
> Alsa-devel mailing list
> Alsa-devel@lists.sourceforge.net
> https://lists.sourceforge.net/lists/listinfo/alsa-devel

-- 
Tobin Davis <tdavis@dsl-only.net>

[-- Attachment #1.2: Type: text/html, Size: 9564 bytes --]

[-- Attachment #2: Type: text/plain, Size: 347 bytes --]

-------------------------------------------------------------------------
Take Surveys. Earn Cash. Influence the Future of IT
Join SourceForge.net's Techsay panel and you'll get the chance to share your
opinions on IT & business topics through brief surveys - and earn cash
http://www.techsay.com/default.php?page=join.php&p=sourceforge&CID=DEVDEV

[-- Attachment #3: Type: text/plain, Size: 161 bytes --]

_______________________________________________
Alsa-devel mailing list
Alsa-devel@lists.sourceforge.net
https://lists.sourceforge.net/lists/listinfo/alsa-devel

  reply	other threads:[~2006-12-27 22:32 UTC|newest]

Thread overview: 11+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2006-12-27 22:00 BUG in >=1.0.13rc1 risc
2006-12-27 22:32 ` Tobin Davis [this message]
2006-12-27 23:54   ` risc
2007-02-16  1:27     ` risc
     [not found]       ` <200702160335.20228.sjakub@gmail.com>
2007-02-16 20:57         ` risc
2007-02-17  5:19           ` Jakub Schmidtke
2007-02-22 16:19             ` Takashi Iwai
2006-12-28 13:05 ` Takashi Iwai
2006-12-28 18:05   ` risc
2006-12-28 18:27   ` Tobin Davis
2006-12-28 21:13     ` Tobin Davis

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=1167258756.9563.45.camel@localhost \
    --to=tdavis@dsl-only.net \
    --cc=alsa-devel@lists.sourceforge.net \
    --cc=risc@volumehost.com \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox