From: Tobin Davis <tdavis@dsl-only.net>
To: Michael Ringe <Michael.Ringe@web.de>
Cc: alsa-devel@lists.sourceforge.net
Subject: Re: intel_hda model parameter for Samsung Q35
Date: Tue, 02 Jan 2007 15:39:46 -0800 [thread overview]
Message-ID: <1167781186.31371.150.camel@localhost> (raw)
In-Reply-To: <459AE9DF.4050001@web.de>
[-- Attachment #1.1: Type: text/plain, Size: 6873 bytes --]
Could you also indicate what audio codec this system has? It should
show in alsamixer, or better yet, post "cat /proc/asound/card0/codec*".
Thanks,
Tobin
On Wed, 2007-01-03 at 00:25 +0100, Michael Ringe wrote:
> Using the dribers included in Kernel 2.6.19
> My hardware is a Samsung Q35 Pro (Intel Core 2 Duo T5500)
>
> Loading snd_hda_intel without parameters produces strong high frequency noise.
>
> I am now using model=3stack which works fine and also shows the SPDIF output
> controls (I could not test SPDIF, though).
> Feel free to contact me for any further information.
>
> --Michael
>
> lspci -nv follows
>
> 00:00.0 0600: 8086:27a0 (rev 03)
> Subsystem: 144d:c504
> Flags: bus master, fast devsel, latency 0
> Capabilities: <access denied>
>
> 00:02.0 0300: 8086:27a2 (rev 03)
> Subsystem: 144d:c504
> Flags: bus master, fast devsel, latency 0, IRQ 17
> Memory at d8100000 (32-bit, non-prefetchable) [size=512K]
> I/O ports at 1800 [size=8]
> Memory at c0000000 (32-bit, prefetchable) [size=256M]
> Memory at d8200000 (32-bit, non-prefetchable) [size=256K]
> Capabilities: <access denied>
>
> 00:02.1 0380: 8086:27a6 (rev 03)
> Subsystem: 144d:c504
> Flags: fast devsel
> Memory at d8180000 (32-bit, non-prefetchable) [size=512K]
> Capabilities: <access denied>
>
> 00:1b.0 0403: 8086:27d8 (rev 02)
> Subsystem: 144d:c504
> Flags: bus master, fast devsel, latency 0, IRQ 19
> Memory at d8240000 (64-bit, non-prefetchable) [size=16K]
> Capabilities: <access denied>
>
> 00:1c.0 0604: 8086:27d0 (rev 02)
> Flags: bus master, fast devsel, latency 0
> Bus: primary=00, secondary=02, subordinate=02, sec-latency=0
> I/O behind bridge: 00002000-00002fff
> Memory behind bridge: d4000000-d5ffffff
> Prefetchable memory behind bridge: 00000000d0000000-00000000d1f00000
> Capabilities: <access denied>
>
> 00:1c.1 0604: 8086:27d2 (rev 02)
> Flags: bus master, fast devsel, latency 0
> Bus: primary=00, secondary=03, subordinate=04, sec-latency=0
> Capabilities: <access denied>
>
> 00:1d.0 0c03: 8086:27c8 (rev 02)
> Subsystem: 144d:c504
> Flags: bus master, medium devsel, latency 0, IRQ 22
> I/O ports at 1820 [size=32]
>
> 00:1d.1 0c03: 8086:27c9 (rev 02)
> Subsystem: 144d:c504
> Flags: bus master, medium devsel, latency 0, IRQ 23
> I/O ports at 1840 [size=32]
>
> 00:1d.2 0c03: 8086:27ca (rev 02)
> Subsystem: 144d:c50400:1d.3 0c03: 8086:27cb (rev 02)
> Subsystem: 144d:c504
> Flags: bus master, medium devsel, latency 0, IRQ 17
> I/O ports at 1880 [size=32]
>
> 00:1d.7 0c03: 8086:27cc (rev 02) (prog-if 20)
> Subsystem: 144d:c504
> Flags: bus master, medium devsel, latency 0, IRQ 22
> Memory at d8444000 (32-bit, non-prefetchable) [size=1K]
> Capabilities: <access denied>
>
> 00:1e.0 0604: 8086:2448 (rev e2) (prog-if 01)
> Flags: bus master, fast devsel, latency 0
> Bus: primary=00, secondary=05, subordinate=09, sec-latency=32
> I/O behind bridge: 00003000-00003fff
> Memory behind bridge: d8000000-d80fffff
> Prefetchable memory behind bridge: 0000000050000000-0000000051f00000
> Capabilities: <access denied>
>
> 00:1f.0 0601: 8086:27b9 (rev 02)
> Subsystem: 144d:c504
> Flags: bus master, medium devsel, latency 0
> Capabilities: <access denied>
>
> 00:1f.1 0101: 8086:27df (rev 02) (prog-if 8a)
> Subsystem: 144d:c504
> Flags: bus master, medium devsel, latency 0, IRQ 20
> I/O ports at <unassigned>
> I/O ports at <unassigned>
> I/O ports at <unassigned>
> I/O ports at <unassigned>
> I/O ports at 1810 [size=16]
>
> 00:1f.3 0c05: 8086:27da (rev 02)
> Subsystem: 144d:c504
> Flags: medium devsel, IRQ 23
> I/O ports at 18a0 [size=32]
>
> 02:00.0 0280: 8086:4222 (rev 02)
> Subsystem: 8086:1001
> Flags: bus master, fast devsel, latency 0, IRQ 17
> Memory at d4000000 (32-bit, non-prefetchable) [size=4K]
> Capabilities: <access denied>
>
> 05:05.0 0200: 14e4:170c (rev 02)05:09.0 0607: 1180:0476 (rev b4)
> Subsystem: 144d:c504
> Flags: bus master, medium devsel, latency 168, IRQ 18
> Memory at d8004000 (32-bit, non-prefetchable) [size=4K]
> Bus: primary=05, secondary=06, subordinate=09, sec-latency=176
> Memory window 0: 50000000-51fff000 (prefetchable)
> Memory window 1: 52000000-53fff000
> I/O window 0: 00003000-000030ff
> I/O window 1: 00003400-000034ff
> 16-bit legacy interface ports at 0001
>
> 05:09.1 0c00: 1180:0552 (rev 09) (prog-if 10)
> Subsystem: 144d:c024
> Flags: bus master, medium devsel, latency 64, IRQ 21
> Memory at d8002000 (32-bit, non-prefetchable) [size=2K]
> Capabilities: <access denied>
>
> 05:09.2 0805: 1180:0822 (rev 18)
> Subsystem: 144d:c024
> Flags: bus master, medium devsel, latency 64, IRQ 19
> Memory at d8002800 (32-bit, non-prefetchable) [size=256]
> Capabilities: <access denied>
>
> 05:09.3 0880: 1180:0843
> Subsystem: 144d:c024
> Flags: medium devsel, IRQ 255
> Memory at d8002c00 (32-bit, non-prefetchable) [disabled] [size=256]
> Capabilities: <access denied>
>
> 05:09.4 0880: 1180:0592 (rev 09)
> Subsystem: 144d:c024
> Flags: medium devsel, IRQ 255
> Memory at d8003000 (32-bit, non-prefetchable) [disabled] [size=256]
> Capabilities: <access denied>
>
> 05:09.5 0880: 1180:0852 (rev 04)
> Subsystem: 144d:c024
> Flags: medium devsel, IRQ 255
> Memory at d8003400 (32-bit, non-prefetchable) [disabled] [size=256]
> Capabilities: <access denied>
>
> Subsystem: 144d:c504
> Flags: bus master, fast devsel, latency 32, IRQ 19
> Memory at d8000000 (32-bit, non-prefetchable) [size=8K]
> Capabilities: <access denied>
>
> Flags: bus master, medium devsel, latency 0, IRQ 20
> I/O ports at 1860 [size=32]
>
>
> -------------------------------------------------------------------------
> Take Surveys. Earn Cash. Influence the Future of IT
> Join SourceForge.net's Techsay panel and you'll get the chance to share your
> opinions on IT & business topics through brief surveys - and earn cash
> http://www.techsay.com/default.php?page=join.php&p=sourceforge&CID=DEVDEV
> _______________________________________________
> Alsa-devel mailing list
> Alsa-devel@lists.sourceforge.net
> https://lists.sourceforge.net/lists/listinfo/alsa-devel
--
Tobin Davis <tdavis@dsl-only.net>
[-- Attachment #1.2: Type: text/html, Size: 11309 bytes --]
[-- Attachment #2: Type: text/plain, Size: 347 bytes --]
-------------------------------------------------------------------------
Take Surveys. Earn Cash. Influence the Future of IT
Join SourceForge.net's Techsay panel and you'll get the chance to share your
opinions on IT & business topics through brief surveys - and earn cash
http://www.techsay.com/default.php?page=join.php&p=sourceforge&CID=DEVDEV
[-- Attachment #3: Type: text/plain, Size: 161 bytes --]
_______________________________________________
Alsa-devel mailing list
Alsa-devel@lists.sourceforge.net
https://lists.sourceforge.net/lists/listinfo/alsa-devel
next prev parent reply other threads:[~2007-01-02 23:39 UTC|newest]
Thread overview: 3+ messages / expand[flat|nested] mbox.gz Atom feed top
2007-01-02 23:25 intel_hda model parameter for Samsung Q35 Michael Ringe
2007-01-02 23:39 ` Tobin Davis [this message]
2007-01-04 21:50 ` Michael Ringe
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1167781186.31371.150.camel@localhost \
--to=tdavis@dsl-only.net \
--cc=Michael.Ringe@web.de \
--cc=alsa-devel@lists.sourceforge.net \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox