From: Tobin Davis <tdavis@dsl-only.net>
To: jmsgrtn-alsa@yahoo.com
Cc: alsa-devel@lists.sourceforge.net
Subject: Re: No sound with intel hda driver on a sony vaio vgx xl100 system
Date: Mon, 22 Jan 2007 14:10:39 -0800 [thread overview]
Message-ID: <1169503839.31789.100.camel@localhost> (raw)
In-Reply-To: <486159.63650.qm@web36806.mail.mud.yahoo.com>
[-- Attachment #1.1: Type: text/plain, Size: 8482 bytes --]
Your subsystem ID (104d:81f7) is not listed in the driver currently.
The driver is configured to use the generic parser if it can't find a
match.
There are two defined models for your codec (vaio, vaio-ar). Try
loading the driver with one of those models as follows:
modprobe -r snd-hda-intel # remove driver
modprobe snd-hda-intel model=vaio # reload with model deffinition
Try both model deffinitions to see which works better for you. Report
back your results and we'll get it added.
Thanks,
Tobin Davis
On Mon, 2007-01-22 at 22:22 +0100, jmsgrtn-alsa@yahoo.com wrote:
> Hi
>
> I can't have any sound on my sony VAIO vgx-xl100 system with the 1.0.14rc2
> build on a 2.6.18 kernel (debian)
>
> the output of lspci -nv is :
>
> 00:1b.0 0403: 8086:27d8 (rev 01)
> Subsystem: 104d:81f7
> Flags: bus master, fast devsel, latency 0, IRQ 169
> Memory at fdff8000 (64-bit, non-prefetchable) [size=16K]
> Capabilities: <access denied>
>
> dmesg gives :
>
> ACPI: PCI interrupt for device 0000:00:1b.0 disabled
> PCI: Enabling device 0000:00:1b.0 (0000 -> 0002)
> ACPI: PCI Interrupt 0000:00:1b.0[A] -> GSI 16 (level, low) -> IRQ 169
> PCI: Setting latency timer of device 0000:00:1b.0 to 64
> ALSA
> /home/jm/tmp/alsa-driver-1.0.14rc2/pci/hda/../../alsa-kernel/pci/hda/hda_intel.c:696:
> codec_mask = 0x1
> ALSA
> /home/jm/tmp/alsa-driver-1.0.14rc2/pci/hda/../../alsa-kernel/pci/hda/hda_generic.c:611:
> AUD_IN = 6
> ALSA
> /home/jm/tmp/alsa-driver-1.0.14rc2/pci/hda/../../alsa-kernel/pci/hda/hda_generic.c:233:
> UNMUTE IN: NID=0x6 IDX=0x0
> ALSA
> /home/jm/tmp/alsa-driver-1.0.14rc2/pci/hda/../../alsa-kernel/pci/hda/hda_generic.c:233:
> UNMUTE IN: NID=0xe IDX=0x0
> ALSA
> /home/jm/tmp/alsa-driver-1.0.14rc2/pci/hda/../../alsa-kernel/pci/hda/hda_generic.c:233:
> UNMUTE IN: NID=0x7 IDX=0x0
> ALSA
> /home/jm/tmp/alsa-driver-1.0.14rc2/pci/hda/../../alsa-kernel/pci/hda/hda_generic.c:217:
> UNMUTE OUT: NID=0x7
> ALSA
> /home/jm/tmp/alsa-driver-1.0.14rc2/pci/hda/../../alsa-kernel/pci/hda/hda_generic.c:648:
> [Capture Source] NID=0x6, #SRC=1
> ALSA
> /home/jm/tmp/alsa-driver-1.0.14rc2/pci/hda/../../alsa-kernel/pci/hda/hda_generic.c:651:
> [Line] IDX=0x0
> ALSA
> /home/jm/tmp/alsa-driver-1.0.14rc2/pci/hda/../../alsa-kernel/pci/hda/hda_generic.c:289:
> AUD_OUT found 2
> ALSA
> /home/jm/tmp/alsa-driver-1.0.14rc2/pci/hda/../../alsa-kernel/pci/hda/hda_generic.c:233:
> UNMUTE IN: NID=0xa IDX=0x0
> ALSA
> /home/jm/tmp/alsa-driver-1.0.14rc2/pci/hda/../../alsa-kernel/pci/hda/hda_generic.c:217:
> UNMUTE OUT: NID=0xa
> ALSA
> /home/jm/tmp/alsa-driver-1.0.14rc2/pci/hda/../../alsa-kernel/pci/hda/hda_generic.c:217:
> UNMUTE OUT: NID=0xa
> ALSA
> /home/jm/tmp/alsa-driver-1.0.14rc2/pci/hda/../../alsa-kernel/pci/hda/hda_generic.c:251:
> CONNECT: NID=0x6 IDX=0x0
> ALSA
> /home/jm/tmp/alsa-driver-1.0.14rc2/pci/hda/../../alsa-kernel/pci/hda/hda_generic.c:713:
> [Master Playback Switch] NID=0x2, DIR=OUT
> ALSA
> /home/jm/tmp/alsa-driver-1.0.14rc2/pci/hda/../../alsa-kernel/pci/hda/hda_generic.c:733:
> [Master Playback Volume] NID=0x2, DIR=OUT
>
> and the contents of /proc/asound/card0/codec# is :
>
> Codec: SigmaTel CXD9872RD/K
> Address: 0
> Vendor Id: 0x83847661
> Subsystem Id: 0x104d0b00
> Revision Id: 0x104201
> Default PCM:
> rates [0x7e0]: 44100 48000 88200 96000 176400 192000
> bits [0xe]: 16 20 24
> formats [0x1]: PCM
> Default Amp-In caps: ofs=0x00, nsteps=0x0f, stepsize=0x05, mute=1
> Default Amp-Out caps: ofs=0x7f, nsteps=0x7f, stepsize=0x02, mute=1
> Node 0x02 [Audio Output] wcaps 0xd0c05: Stereo Amp-Out
> Amp-Out caps: N/A
> Amp-Out vals: [0x3c 0x3c]
> Power: 0x0
> Node 0x03 [Audio Output] wcaps 0xd0c05: Stereo Amp-Out
> Amp-Out caps: N/A
> Amp-Out vals: [0xff 0xff]
> Power: 0x0
> Node 0x04 [Audio Output] wcaps 0xd0c05: Stereo Amp-Out
> Amp-Out caps: N/A
> Amp-Out vals: [0xff 0xff]
> Power: 0x0
> Node 0x05 [Audio Output] wcaps 0xd0c05: Stereo Amp-Out
> Amp-Out caps: N/A
> Amp-Out vals: [0x3c 0x3c]
> Power: 0x0
> Node 0x06 [Audio Input] wcaps 0x1d0541: Stereo
> Power: 0x0
> Connection: 1
> 0x07
> Node 0x07 [Audio Selector] wcaps 0x300903: Stereo Amp-In
> Amp-In caps: N/A
> Amp-In vals: [0x00 0x00]
> Connection: 1
> 0x0e
> Node 0x08 [Audio Input] wcaps 0x1d0541: Stereo
> Power: 0x0
> Connection: 1
> 0x09
> Node 0x09 [Audio Selector] wcaps 0x300903: Stereo Amp-In
> Amp-In caps: N/A
> Amp-In vals: [0x80 0x80]
> Connection: 1
> 0x15
> Node 0x0a [Pin Complex] wcaps 0x400181: Stereo
> Pincap 0x08173c: IN OUT HP Detect
> Pin Default 0x02024110: [Jack] Line Out at Ext Front
> Conn = 1/4, Color = Green
> Pin-ctls: 0xc0: OUT HP
> Connection: 1
> 0x02
> Node 0x0b [Pin Complex] wcaps 0x400181: Stereo
> Pincap 0x0814: OUT Detect
> Pin Default 0x411111f0: [N/A] Speaker at Ext Rear
> Conn = 1/8, Color = Black
> Pin-ctls: 0x00:
> Connection: 1
> 0x04
> Node 0x0c [Pin Complex] wcaps 0x400181: Stereo
> Pincap 0x0814: OUT Detect
> Pin Default 0x411111f0: [N/A] Speaker at Ext Rear
> Conn = 1/8, Color = Black
> Pin-ctls: 0x00:
> Connection: 1
> 0x03
> Node 0x0d [Pin Complex] wcaps 0x400181: Stereo
> Pincap 0x08173c: IN OUT HP Detect
> Pin Default 0x02a19920: [Jack] Mic at Ext Front
> Conn = 1/8, Color = Pink
> Pin-ctls: 0x24: IN
> Connection: 1
> 0x02
> Node 0x0e [Pin Complex] wcaps 0x400081: Stereo
> Pincap 0x0824: IN Detect
> Pin Default 0x01845121: [Jack] Line In at Ext Rear
> Conn = RCA, Color = Red
> Pin-ctls: 0x20: IN
> Node 0x0f [Pin Complex] wcaps 0x400181: Stereo
> Pincap 0x0814: OUT Detect
> Pin Default 0x01045111: [Jack] Line Out at Ext Rear
> Conn = RCA, Color = Red
> Pin-ctls: 0x40: OUT
> Connection: 1
> 0x05
> Node 0x10 [Audio Output] wcaps 0x40211: Stereo Digital
> PCM:
> rates [0x3e0]: 44100 48000 88200 96000 176400
> bits [0xe]: 16 20 24
> formats [0x5]: PCM AC3
> Node 0x11 [Pin Complex] wcaps 0x400301: Stereo Digital
> Pincap 0x0810: OUT
> Pin Default 0x01451112: [Jack] SPDIF Out at Ext Rear
> Conn = Optical, Color = Black
> Pin-ctls: 0x00:
> Connection: 2
> 0x10* 0x09
> Node 0x12 [Audio Input] wcaps 0x140311: Stereo Digital
> PCM:
> rates [0x160]: 44100 48000 96000
> bits [0xe]: 16 20 24
> formats [0x5]: PCM AC3
> Connection: 1
> 0x13
> Node 0x13 [Pin Complex] wcaps 0x440381: Stereo Digital
> Pincap 0x0834: IN OUT Detect
> Pin Default 0x01c51122: [Jack] SPDIF In at Ext Rear
> Conn = Optical, Color = Black
> Pin-ctls: 0x00:
> Connection: 1
> 0x18
> Node 0x14 [Pin Complex] wcaps 0x400001: Stereo
> Pincap 0x0820: IN
> Pin Default 0x411111f0: [N/A] Speaker at Ext Rear
> Conn = 1/8, Color = Black
> Pin-ctls: 0x20: IN
> Node 0x15 [Audio Selector] wcaps 0x30010d: Stereo Amp-Out
> Amp-Out caps: ofs=0x00, nsteps=0x04, stepsize=0x27, mute=1
> Amp-Out vals: [0x00 0x00]
> Connection: 4
> 0x0a 0x0d* 0x14 0x02
> Node 0x16 [Beep Generator Widget] wcaps 0x70000c: Mono Amp-Out
> Amp-Out caps: ofs=0x03, nsteps=0x03, stepsize=0x17, mute=0
> Amp-Out vals: [0x00]
> Node 0x17 [Volume Knob Widget] wcaps 0x600000: Mono
> Node 0x18 [Audio Output] wcaps 0x40201: Stereo Digital
>
>
>
> ---------------------------------
> Jean-Marc Segretain
> mailto:jmsegretain@yahoo.com
>
>
>
>
>
>
>
> ___________________________________________________________________________
> Découvrez une nouvelle façon d'obtenir des réponses à toutes vos questions !
> Profitez des connaissances, des opinions et des expériences des internautes sur Yahoo! Questions/Réponses
> http://fr.answers.yahoo.com
>
> -------------------------------------------------------------------------
> Take Surveys. Earn Cash. Influence the Future of IT
> Join SourceForge.net's Techsay panel and you'll get the chance to share your
> opinions on IT & business topics through brief surveys - and earn cash
> http://www.techsay.com/default.php?page=join.php&p=sourceforge&CID=DEVDEV
> _______________________________________________
> Alsa-devel mailing list
> Alsa-devel@lists.sourceforge.net
> https://lists.sourceforge.net/lists/listinfo/alsa-devel
--
Tobin Davis <tdavis@dsl-only.net>
[-- Attachment #1.2: Type: text/html, Size: 14689 bytes --]
[-- Attachment #2: Type: text/plain, Size: 347 bytes --]
-------------------------------------------------------------------------
Take Surveys. Earn Cash. Influence the Future of IT
Join SourceForge.net's Techsay panel and you'll get the chance to share your
opinions on IT & business topics through brief surveys - and earn cash
http://www.techsay.com/default.php?page=join.php&p=sourceforge&CID=DEVDEV
[-- Attachment #3: Type: text/plain, Size: 161 bytes --]
_______________________________________________
Alsa-devel mailing list
Alsa-devel@lists.sourceforge.net
https://lists.sourceforge.net/lists/listinfo/alsa-devel
next prev parent reply other threads:[~2007-01-22 22:10 UTC|newest]
Thread overview: 7+ messages / expand[flat|nested] mbox.gz Atom feed top
2007-01-22 21:22 No sound with intel hda driver on a sony vaio vgx xl100 system jmsgrtn-alsa
2007-01-22 22:10 ` Tobin Davis [this message]
2007-01-23 22:46 ` RE : " jmsgrtn-alsa
2007-01-25 12:28 ` Takashi Iwai
2007-01-25 22:20 ` RE : " jmsgrtn-alsa
2007-01-26 15:59 ` Takashi Iwai
2007-01-26 21:02 ` RE : " jmsgrtn-alsa
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1169503839.31789.100.camel@localhost \
--to=tdavis@dsl-only.net \
--cc=alsa-devel@lists.sourceforge.net \
--cc=jmsgrtn-alsa@yahoo.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).