Alsa-Devel Archive on lore.kernel.org
 help / color / mirror / Atom feed
From: Tobin Davis <tdavis@dsl-only.net>
To: Die Mumie <mumie_die@yahoo.de>
Cc: alsa-devel@alsa-project.org
Subject: Re: New Realtec ALC833 Codec in Fujitsu Siemens Xi2428
Date: Tue, 04 Dec 2007 16:12:23 -0800	[thread overview]
Message-ID: <1196813543.10030.92.camel@razman.gruemaster.com> (raw)
In-Reply-To: <727519.46861.qm@web26704.mail.ukl.yahoo.com>

No, this is as good a place as any to post.  We'll need a bit more info,
though.  The easiest way to get the info is to run this script:
http://bulletproof.servebeer.com/alsa/scripts/alsa-info.sh

Post the link it generates back to this mailing list and either I or
someone else can look into it.  Be patient, as it may take a week or
two.

Also, try one of the supported models for the ALC883:

                  3stack-dig    3-jack with SPDIF I/O
                  6stack-dig    6-jack digital with SPDIF I/O
                  3stack-6ch    3-jack 6-channel
                  3stack-6ch-dig 3-jack 6-channel with SPDIF I/O
                  6stack-dig-demo  6-jack digital for Intel demo board
                  acer          Acer laptops (Travelmate 3012WTMi,
        Aspire 5600, etc)
                  acer-aspire   Acer Aspire 9810
                  medion        Medion Laptops
                  medion-md2    Medion MD2
                  targa-dig     Targa/MSI
                  targa-2ch-dig Targs/MSI with 2-channel
                  laptop-eapd   3-jack with SPDIF I/O and EAPD (Clevo
        M540JE, M550JE)
                  lenovo-101e   Lenovo 101E
                  lenovo-nb0763 Lenovo NB0763
                  lenovo-ms7195-dig Lenovo MS7195
                  haier-w66     Haier W66
                  6stack-hp     HP machines with 6stack (Nettle boards)
                  3stack-hp     HP machines with 3stack (Lucknow, Samba
        boards)
                  auto          auto-config reading BIOS (default)
        

To test these confiugurations, unload and reload the driver with
"modprobe -r snd-hda-intel && modprobe snd-hda-intel model=<model
name>" (replace <model name> with one from above - i.e. medion).



Tobin

On Tue, 2007-12-04 at 23:49 +0100, Die Mumie wrote:

> Hi,
> I've been told to post here, so I do.
> 
> I have a Notebook with a Intel hda sound device, the /proc/asound/card0/codec#1 returns Realtec ALC833 but there is no model provided by the alsa driver that runs this Soundcard properly.
> 
> Am I wrong here?
> If yes, then I'm sorry.
> 
>        
> ---------------------------------
> Heute schon einen Blick in die Zukunft von E-Mails wagen? Versuchen Sie´s mit dem  neuen Yahoo! Mail. 
> _______________________________________________
> Alsa-devel mailing list
> Alsa-devel@alsa-project.org
> http://mailman.alsa-project.org/mailman/listinfo/alsa-devel

-- 
Tobin Davis  


This land is full of trousers!
this land is full of mausers!
	And pussycats to eat them when the sun goes down!
		-- Firesign Theater
_______________________________________________
Alsa-devel mailing list
Alsa-devel@alsa-project.org
http://mailman.alsa-project.org/mailman/listinfo/alsa-devel

  reply	other threads:[~2007-12-05  0:12 UTC|newest]

Thread overview: 6+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2007-12-04 22:49 New Realtec ALC833 Codec in Fujitsu Siemens Xi2428 Die Mumie
2007-12-05  0:12 ` Tobin Davis [this message]
2007-12-05  0:47   ` Die Mumie
     [not found] <20071205071714.GA24527@serv.smile.org.ua>
2007-12-05 11:26 ` Die Mumie
2007-12-07 15:42   ` Andy Shevchenko
     [not found] <1196875384.10030.131.camel@razman.gruemaster.com>
2007-12-05 18:05 ` Die Mumie

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=1196813543.10030.92.camel@razman.gruemaster.com \
    --to=tdavis@dsl-only.net \
    --cc=alsa-devel@alsa-project.org \
    --cc=mumie_die@yahoo.de \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox