From: Mark Brown <broonie@opensource.wolfsonmicro.com>
To: Takashi Iwai <tiwai@suse.de>
Cc: alsa-devel@alsa-project.org,
Mark Brown <broonie@opensource.wolfsonmicro.com>,
Richard Purdie <rpurdie@rpsys.net>
Subject: [PATCH 06/10] soc - Zaurus - Convert to bulk DAPM registration APIs
Date: Tue, 13 May 2008 12:40:11 +0100 [thread overview]
Message-ID: <1210678815-9755-6-git-send-email-broonie@opensource.wolfsonmicro.com> (raw)
In-Reply-To: <1210678815-9755-5-git-send-email-broonie@opensource.wolfsonmicro.com>
Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
Cc: Richard Purdie <rpurdie@rpsys.net>
---
sound/soc/pxa/corgi.c | 12 ++++--------
sound/soc/pxa/poodle.c | 14 +++++---------
sound/soc/pxa/spitz.c | 14 +++++---------
sound/soc/pxa/tosa.c | 14 ++++----------
4 files changed, 18 insertions(+), 36 deletions(-)
diff --git a/sound/soc/pxa/corgi.c b/sound/soc/pxa/corgi.c
index 7f32a11..852f16d 100644
--- a/sound/soc/pxa/corgi.c
+++ b/sound/soc/pxa/corgi.c
@@ -247,7 +247,7 @@ SND_SOC_DAPM_HP("Headset Jack", NULL),
};
/* Corgi machine audio map (connections to the codec pins) */
-static const char *audio_map[][3] = {
+static const struct snd_soc_dapm_route audio_map[] = {
/* headset Jack - in = micin, out = LHPOUT*/
{"Headset Jack", NULL, "LHPOUT"},
@@ -265,8 +265,6 @@ static const char *audio_map[][3] = {
/* Same as the above but no mic bias for line signals */
{"MICIN", NULL, "Line Jack"},
-
- {NULL, NULL, NULL},
};
static const char *jack_function[] = {"Headphone", "Mic", "Line", "Headset",
@@ -303,13 +301,11 @@ static int corgi_wm8731_init(struct snd_soc_codec *codec)
}
/* Add corgi specific widgets */
- for (i = 0; i < ARRAY_SIZE(wm8731_dapm_widgets); i++)
- snd_soc_dapm_new_control(codec, &wm8731_dapm_widgets[i]);
+ snd_soc_dapm_new_controls(codec, wm8731_dapm_widgets,
+ ARRAY_SIZE(wm8731_dapm_widgets));
/* Set up corgi specific audio path audio_map */
- for (i = 0; audio_map[i][0] != NULL; i++)
- snd_soc_dapm_connect_input(codec, audio_map[i][0],
- audio_map[i][1], audio_map[i][2]);
+ snd_soc_dapm_add_routes(codec, audio_map, ARRAY_SIZE(audio_map));
snd_soc_dapm_sync_endpoints(codec);
return 0;
diff --git a/sound/soc/pxa/poodle.c b/sound/soc/pxa/poodle.c
index 7e830b2..810f1fe 100644
--- a/sound/soc/pxa/poodle.c
+++ b/sound/soc/pxa/poodle.c
@@ -215,8 +215,8 @@ SND_SOC_DAPM_HP("Headphone Jack", NULL),
SND_SOC_DAPM_SPK("Ext Spk", poodle_amp_event),
};
-/* Corgi machine audio_mapnections to the codec pins */
-static const char *audio_map[][3] = {
+/* Corgi machine connections to the codec pins */
+static const struct snd_soc_dapm_route audio_map[] = {
/* headphone connected to LHPOUT1, RHPOUT1 */
{"Headphone Jack", NULL, "LHPOUT"},
@@ -225,8 +225,6 @@ static const char *audio_map[][3] = {
/* speaker connected to LOUT, ROUT */
{"Ext Spk", NULL, "ROUT"},
{"Ext Spk", NULL, "LOUT"},
-
- {NULL, NULL, NULL},
};
static const char *jack_function[] = {"Off", "Headphone"};
@@ -263,13 +261,11 @@ static int poodle_wm8731_init(struct snd_soc_codec *codec)
}
/* Add poodle specific widgets */
- for (i = 0; i < ARRAY_SIZE(wm8731_dapm_widgets); i++)
- snd_soc_dapm_new_control(codec, &wm8731_dapm_widgets[i]);
+ snd_soc_dapm_new_controls(codec, wm8731_dapm_widgets,
+ ARRAY_SIZE(wm8731_dapm_widgets));
/* Set up poodle specific audio path audio_map */
- for (i = 0; audio_map[i][0] != NULL; i++)
- snd_soc_dapm_connect_input(codec, audio_map[i][0],
- audio_map[i][1], audio_map[i][2]);
+ snd_soc_dapm_add_routes(codec, audio_map, ARRAY_SIZE(audio_map));
snd_soc_dapm_sync_endpoints(codec);
return 0;
diff --git a/sound/soc/pxa/spitz.c b/sound/soc/pxa/spitz.c
index d8b8372..73a6df8 100644
--- a/sound/soc/pxa/spitz.c
+++ b/sound/soc/pxa/spitz.c
@@ -250,7 +250,7 @@ static const struct snd_soc_dapm_widget wm8750_dapm_widgets[] = {
};
/* Spitz machine audio_map */
-static const char *audio_map[][3] = {
+static const struct snd_soc_dapm_route audio_map[] = {
/* headphone connected to LOUT1, ROUT1 */
{"Headphone Jack", NULL, "LOUT1"},
@@ -269,8 +269,6 @@ static const char *audio_map[][3] = {
/* line is connected to input 1 - no bias */
{"LINPUT1", NULL, "Line Jack"},
-
- {NULL, NULL, NULL},
};
static const char *jack_function[] = {"Headphone", "Mic", "Line", "Headset",
@@ -313,13 +311,11 @@ static int spitz_wm8750_init(struct snd_soc_codec *codec)
}
/* Add spitz specific widgets */
- for (i = 0; i < ARRAY_SIZE(wm8750_dapm_widgets); i++)
- snd_soc_dapm_new_control(codec, &wm8750_dapm_widgets[i]);
+ snd_soc_dapm_new_controls(codec, wm8750_dapm_widgets,
+ ARRAY_SIZE(wm8750_dapm_widgets));
- /* Set up spitz specific audio path audio_map */
- for (i = 0; audio_map[i][0] != NULL; i++)
- snd_soc_dapm_connect_input(codec, audio_map[i][0],
- audio_map[i][1], audio_map[i][2]);
+ /* Set up spitz specific audio paths */
+ snd_soc_dapm_add_routes(codec, audio_map, ARRAY_SIZE(audio_map));
snd_soc_dapm_sync_endpoints(codec);
return 0;
diff --git a/sound/soc/pxa/tosa.c b/sound/soc/pxa/tosa.c
index 7346d7e..fda2aa0 100644
--- a/sound/soc/pxa/tosa.c
+++ b/sound/soc/pxa/tosa.c
@@ -154,7 +154,7 @@ SND_SOC_DAPM_SPK("Speaker", NULL),
};
/* tosa audio map */
-static const char *audio_map[][3] = {
+static const snd_soc_dapm_route audio_map[] = {
/* headphone connected to HPOUTL, HPOUTR */
{"Headphone Jack", NULL, "HPOUTL"},
@@ -173,8 +173,6 @@ static const char *audio_map[][3] = {
{"Headset Jack", NULL, "HPOUTR"},
{"LINEINR", NULL, "Mic Bias"},
{"Mic Bias", NULL, "Headset Jack"},
-
- {NULL, NULL, NULL},
};
static const char *jack_function[] = {"Headphone", "Mic", "Line", "Headset",
@@ -208,15 +206,11 @@ static int tosa_ac97_init(struct snd_soc_codec *codec)
}
/* add tosa specific widgets */
- for (i = 0; i < ARRAY_SIZE(tosa_dapm_widgets); i++) {
- snd_soc_dapm_new_control(codec, &tosa_dapm_widgets[i]);
- }
+ snd_soc_dapm_new_controls(codec, &tosa_dapm_widgets,
+ ARRAY_SIZE(tosa_dapm_widgets));
/* set up tosa specific audio path audio_map */
- for (i = 0; audio_map[i][0] != NULL; i++) {
- snd_soc_dapm_connect_input(codec, audio_map[i][0],
- audio_map[i][1], audio_map[i][2]);
- }
+ snd_soc_dapm_add_routes(codec, audio_map, ARRAY_SIZE(audio_map));
snd_soc_dapm_sync_endpoints(codec);
return 0;
--
1.5.5.1
next prev parent reply other threads:[~2008-05-13 11:40 UTC|newest]
Thread overview: 19+ messages / expand[flat|nested] mbox.gz Atom feed top
2008-05-13 11:40 [PATCH 01/10] ASoC: build fix for snd_soc_info_bool_ext Mark Brown
2008-05-13 11:40 ` [PATCH 02/10] soc - DAPM - Add bulk control registration Mark Brown
2008-05-13 11:40 ` [PATCH 03/10] soc - DAPM - Bulk route registration Mark Brown
2008-05-13 11:40 ` [PATCH 04/10] soc - Convert Wolfson codec drivers to use bulk DAPM registration Mark Brown
2008-05-13 11:40 ` [PATCH 05/10] soc - tlv320aic3x - Convert to use bulk registration APIs Mark Brown
2008-05-13 11:40 ` Mark Brown [this message]
2008-05-13 11:40 ` [PATCH 07/10] soc - eti_b1_wm8731 - Convert to use bulk DAPM control registration Mark Brown
2008-05-13 11:40 ` [PATCH 08/10] soc - neo1973_wm8753 - Convert to bulk DAPM registration APIs Mark Brown
2008-05-13 11:40 ` [PATCH 09/10] soc - davinci-evm - Update for " Mark Brown
2008-05-13 11:40 ` [PATCH 10/10] soc - n810 " Mark Brown
2008-05-13 12:34 ` [PATCH 05/10] soc - tlv320aic3x - Convert to use bulk " Jarkko Nikula
2008-05-13 12:43 ` Mark Brown
2008-05-13 13:20 ` Jarkko Nikula
2008-05-13 13:28 ` Mark Brown
2008-05-13 13:33 ` [PATCH 01/10] ASoC: build fix for snd_soc_info_bool_ext Takashi Iwai
2008-05-13 13:41 ` Mark Brown
2008-05-13 13:48 ` Takashi Iwai
2008-05-13 14:08 ` Mark Brown
2008-05-13 15:21 ` Takashi Iwai
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1210678815-9755-6-git-send-email-broonie@opensource.wolfsonmicro.com \
--to=broonie@opensource.wolfsonmicro.com \
--cc=alsa-devel@alsa-project.org \
--cc=rpurdie@rpsys.net \
--cc=tiwai@suse.de \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox