Alsa-Devel Archive on lore.kernel.org
 help / color / mirror / Atom feed
From: Peter Ujfalusi <peter.ujfalusi@nokia.com>
To: alsa-devel@alsa-project.org
Cc: sakoman@gmail.com, Peter Ujfalusi <peter.ujfalusi@nokia.com>
Subject: [PATCH 7/9] ASoC: TWL4030: DAPM mapping of the Carkit outputs
Date: Tue,  9 Dec 2008 12:35:50 +0200	[thread overview]
Message-ID: <1228818952-31082-8-git-send-email-peter.ujfalusi@nokia.com> (raw)
In-Reply-To: <1228818952-31082-7-git-send-email-peter.ujfalusi@nokia.com>

Adds DAPM muxing, routing for the Carkit outputs.

Signed-off-by: Peter Ujfalusi <peter.ujfalusi@nokia.com>
---
 sound/soc/codecs/twl4030.c |   37 +++++++++++++++++++++++++++++++++++++
 1 files changed, 37 insertions(+), 0 deletions(-)

diff --git a/sound/soc/codecs/twl4030.c b/sound/soc/codecs/twl4030.c
index 86ff5a9..08c33e9 100644
--- a/sound/soc/codecs/twl4030.c
+++ b/sound/soc/codecs/twl4030.c
@@ -253,6 +253,30 @@ static const struct soc_enum twl4030_hsor_enum =
 static const struct snd_kcontrol_new twl4030_dapm_hsor_control =
 SOC_DAPM_ENUM("Route", twl4030_hsor_enum);
 
+/* Carkit Left */
+static const char *twl4030_carkitl_texts[] =
+		{"Off", "DACL1", "DACL2"};
+
+static const struct soc_enum twl4030_carkitl_enum =
+	SOC_ENUM_SINGLE(TWL4030_REG_PRECKL_CTL, 1,
+			ARRAY_SIZE(twl4030_carkitl_texts),
+			twl4030_carkitl_texts);
+
+static const struct snd_kcontrol_new twl4030_dapm_carkitl_control =
+SOC_DAPM_ENUM("Route", twl4030_carkitl_enum);
+
+/* Carkit Right */
+static const char *twl4030_carkitr_texts[] =
+		{"Off", "DACR1", "DACR2"};
+
+static const struct soc_enum twl4030_carkitr_enum =
+	SOC_ENUM_SINGLE(TWL4030_REG_PRECKR_CTL, 1,
+			ARRAY_SIZE(twl4030_carkitr_texts),
+			twl4030_carkitr_texts);
+
+static const struct snd_kcontrol_new twl4030_dapm_carkitr_control =
+SOC_DAPM_ENUM("Route", twl4030_carkitr_enum);
+
 static int outmixer_event(struct snd_soc_dapm_widget *w,
 	struct snd_kcontrol *kcontrol, int event)
 {
@@ -751,6 +775,11 @@ static const struct snd_soc_dapm_widget twl4030_dapm_widgets[] = {
 		&twl4030_dapm_hsol_control),
 	SND_SOC_DAPM_MUX("HeadsetR Mux", SND_SOC_NOPM, 0, 0,
 		&twl4030_dapm_hsor_control),
+	/* CarkitL/R */
+	SND_SOC_DAPM_MUX("CarkitL Mux", SND_SOC_NOPM, 0, 0,
+		&twl4030_dapm_carkitl_control),
+	SND_SOC_DAPM_MUX("CarkitR Mux", SND_SOC_NOPM, 0, 0,
+		&twl4030_dapm_carkitr_control),
 
 	SND_SOC_DAPM_ADC("ADCL", "Left Capture", SND_SOC_NOPM, 0, 0),
 	SND_SOC_DAPM_ADC("ADCR", "Right Capture", SND_SOC_NOPM, 0, 0),
@@ -781,6 +810,12 @@ static const struct snd_soc_dapm_route intercon[] = {
 	/* HeadsetR */
 	{"HeadsetR Mux", "DACR1", "ARXR1_APGA"},
 	{"HeadsetR Mux", "DACR2", "ARXR2_APGA"},
+	/* CarkitL */
+	{"CarkitL Mux", "DACL1", "ARXL1_APGA"},
+	{"CarkitL Mux", "DACL2", "ARXL2_APGA"},
+	/* CarkitR */
+	{"CarkitR Mux", "DACR1", "ARXR1_APGA"},
+	{"CarkitR Mux", "DACR2", "ARXR2_APGA"},
 
 	/* outputs */
 	{"OUTL", NULL, "ARXL2_APGA"},
@@ -790,6 +825,8 @@ static const struct snd_soc_dapm_route intercon[] = {
 	{"PREDRIVER", NULL, "PredriveR Mux"},
 	{"HSOL", NULL, "HeadsetL Mux"},
 	{"HSOR", NULL, "HeadsetR Mux"},
+	{"CARKITL", NULL, "CarkitL Mux"},
+	{"CARKITR", NULL, "CarkitR Mux"},
 
 	/* inputs */
 	{"ADCL", NULL, "INL"},
-- 
1.6.0.3

  reply	other threads:[~2008-12-09 10:36 UTC|newest]

Thread overview: 12+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2008-12-09 10:35 [PATCH 0/9] ASoC: TWL4030: DAPM implementation for outputs (playback) - try3 Peter Ujfalusi
2008-12-09 10:35 ` [PATCH 1/9] ASoC: TWL4030: Correct DAPM_DAC with power control Peter Ujfalusi
2008-12-09 10:35   ` [PATCH 2/9] ASoC: TWL4030: Add Analog PGA control switch to DAPM Peter Ujfalusi
2008-12-09 10:35     ` [PATCH 3/9] ASoC: TWL4030: Add DAPM event handler for output MUX selection Peter Ujfalusi
2008-12-09 10:35       ` [PATCH 4/9] ASoC: TWL4030: DAPM mapping of the Earpiece output Peter Ujfalusi
2008-12-09 10:35         ` [PATCH 5/9] ASoC: TWL4030: DAPM mapping of the PreDriv outputs Peter Ujfalusi
2008-12-09 10:35           ` [PATCH 6/9] ASoC: TWL4030: DAPM mapping of the Headset outputs Peter Ujfalusi
2008-12-09 10:35             ` Peter Ujfalusi [this message]
2008-12-09 10:35               ` [PATCH 8/9] ASoC: TWL4030: DAPM mapping of the Handsfree outputs Peter Ujfalusi
2008-12-09 10:35                 ` [PATCH 9/9] ASoC: TWL4030: Do not alter the Headset output volume on power-up/down Peter Ujfalusi
2008-12-09 11:06 ` [PATCH 0/9] ASoC: TWL4030: DAPM implementation for outputs (playback) - try3 Mark Brown
  -- strict thread matches above, loose matches on Subject: below --
2008-12-09  6:45 [PATCH 0/9] ASoC: TWL4030: DAPM implementation for outputs (playback) - try2 Peter Ujfalusi
2008-12-09  6:45 ` [PATCH 1/9] ASoC: TWL4030: Correct DAPM_DAC with power control Peter Ujfalusi
2008-12-09  6:45   ` [PATCH 2/9] ASoC: TWL4030: Add Analog PGA control switch to DAPM Peter Ujfalusi
2008-12-09  6:45     ` [PATCH 3/9] ASoC: TWL4030: Add DAPM event handler for output MUX selection Peter Ujfalusi
2008-12-09  6:45       ` [PATCH 4/9] ASoC: TWL4030: DAPM mapping of the Earpiece output Peter Ujfalusi
2008-12-09  6:45         ` [PATCH 5/9] ASoC: TWL4030: DAPM mapping of the PreDriv outputs Peter Ujfalusi
2008-12-09  6:45           ` [PATCH 6/9] ASoC: TWL4030: DAPM mapping of the Headset outputs Peter Ujfalusi
2008-12-09  6:45             ` [PATCH 7/9] ASoC: TWL4030: DAPM mapping of the Carkit outputs Peter Ujfalusi

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=1228818952-31082-8-git-send-email-peter.ujfalusi@nokia.com \
    --to=peter.ujfalusi@nokia.com \
    --cc=alsa-devel@alsa-project.org \
    --cc=sakoman@gmail.com \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox