Alsa-Devel Archive on lore.kernel.org
 help / color / mirror / Atom feed
From: "stanley.miao" <stanley.miao@windriver.com>
To: alsa-devel@alsa-project.org
Cc: broonie@sirena.org.uk
Subject: Re: [PATCHv2] TWL4030: hands-free start-up sequence.
Date: Thu, 11 Dec 2008 23:32:48 +0800	[thread overview]
Message-ID: <1229009568.7494.18.camel@localhost> (raw)
In-Reply-To: <1229009290-8767-1-git-send-email-stanley.miao@windriver.com>

Changes from last version:

1, clear the bits explicitly.

Stanley.

On Thu, 2008-12-11 at 23:28 +0800, Stanley.Miao wrote:
> A special start-up sequence is required to reduce the pop-noise of Class D
> amplifier when enable hands-free on TWL4030.
> 
> Signed-off-by: Stanley.Miao <stanley.miao@windriver.com>
> ---
>  sound/soc/codecs/twl4030.c |   34 ++++++++++++++++++++++++++++++----
>  sound/soc/codecs/twl4030.h |    6 ++++++
>  2 files changed, 36 insertions(+), 4 deletions(-)
> 
> diff --git a/sound/soc/codecs/twl4030.c b/sound/soc/codecs/twl4030.c
> index 1377302..5184888 100644
> --- a/sound/soc/codecs/twl4030.c
> +++ b/sound/soc/codecs/twl4030.c
> @@ -322,6 +322,30 @@ static int outmixer_event(struct snd_soc_dapm_widget *w,
>  	return ret;
>  }
>  
> +static int handsfree_event(struct snd_soc_dapm_widget *w,
> +		struct snd_kcontrol *kcontrol, int event)
> +{
> +	struct soc_enum *e = (struct soc_enum *)w->kcontrols->private_value;
> +	unsigned char hs_ctl;
> +
> +	hs_ctl = twl4030_read_reg_cache(w->codec, e->reg);
> +
> +	if (hs_ctl & TWL4030_HF_CTL_REF_EN) {
> +		hs_ctl |= TWL4030_HF_CTL_RAMP_EN;
> +		twl4030_write(w->codec, e->reg, hs_ctl);
> +		hs_ctl |= TWL4030_HF_CTL_LOOP_EN;
> +		twl4030_write(w->codec, e->reg, hs_ctl);
> +		hs_ctl |= TWL4030_HF_CTL_HB_EN;
> +		twl4030_write(w->codec, e->reg, hs_ctl);
> +	} else {
> +		hs_ctl &= ~(TWL4030_HF_CTL_RAMP_EN | TWL4030_HF_CTL_LOOP_EN
> +				| TWL4030_HF_CTL_HB_EN);
> +		twl4030_write(w->codec, e->reg, hs_ctl);
> +	}
> +
> +	return 0;
> +}
> +
>  /*
>   * Some of the gain controls in TWL (mostly those which are associated with
>   * the outputs) are implemented in an interesting way:
> @@ -806,10 +830,12 @@ static const struct snd_soc_dapm_widget twl4030_dapm_widgets[] = {
>  	SND_SOC_DAPM_MUX("CarkitR Mux", SND_SOC_NOPM, 0, 0,
>  		&twl4030_dapm_carkitr_control),
>  	/* HandsfreeL/R */
> -	SND_SOC_DAPM_MUX("HandsfreeL Mux", TWL4030_REG_HFL_CTL, 5, 0,
> -		&twl4030_dapm_handsfreel_control),
> -	SND_SOC_DAPM_MUX("HandsfreeR Mux", TWL4030_REG_HFR_CTL, 5, 0,
> -		&twl4030_dapm_handsfreer_control),
> +	SND_SOC_DAPM_MUX_E("HandsfreeL Mux", TWL4030_REG_HFL_CTL, 5, 0,
> +		&twl4030_dapm_handsfreel_control, handsfree_event,
> +		SND_SOC_DAPM_POST_PMU|SND_SOC_DAPM_POST_PMD),
> +	SND_SOC_DAPM_MUX_E("HandsfreeR Mux", TWL4030_REG_HFR_CTL, 5, 0,
> +		&twl4030_dapm_handsfreer_control, handsfree_event,
> +		SND_SOC_DAPM_POST_PMU|SND_SOC_DAPM_POST_PMD),
>  
>  	SND_SOC_DAPM_ADC("ADCL", "Left Capture", SND_SOC_NOPM, 0, 0),
>  	SND_SOC_DAPM_ADC("ADCR", "Right Capture", SND_SOC_NOPM, 0, 0),
> diff --git a/sound/soc/codecs/twl4030.h b/sound/soc/codecs/twl4030.h
> index a2065d4..54615c7 100644
> --- a/sound/soc/codecs/twl4030.h
> +++ b/sound/soc/codecs/twl4030.h
> @@ -191,6 +191,12 @@
>  #define TWL4030_RAMP_DELAY_2581MS	0x1C
>  #define TWL4030_RAMP_EN			0x02
>  
> +/* HFL_CTL (0x29, 0x2A) Fields */
> +#define TWL4030_HF_CTL_HB_EN		0x04
> +#define TWL4030_HF_CTL_LOOP_EN		0x08
> +#define TWL4030_HF_CTL_RAMP_EN		0x10
> +#define TWL4030_HF_CTL_REF_EN		0x20
> +
>  /* APLL_CTL (0x3A) Fields */
>  
>  #define TWL4030_APLL_EN			0x10

      reply	other threads:[~2008-12-11 15:26 UTC|newest]

Thread overview: 4+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2008-12-11  1:52 [PATCH] TWL4030: Add event callback to enable hands-free Stanley.Miao
2008-12-11 12:53 ` Mark Brown
2008-12-11 15:28   ` [PATCHv2] TWL4030: hands-free start-up sequence Stanley.Miao
2008-12-11 15:32     ` stanley.miao [this message]

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=1229009568.7494.18.camel@localhost \
    --to=stanley.miao@windriver.com \
    --cc=alsa-devel@alsa-project.org \
    --cc=broonie@sirena.org.uk \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox