From mboxrd@z Thu Jan 1 00:00:00 1970 From: Nigel Cunningham Subject: Re: 2.6.29 regression: left audio channel broken after resume from suspend with Intel HDA Date: Thu, 07 May 2009 21:54:40 +1000 Message-ID: <1241697280.19600.203.camel@nigel-laptop> References: <20090420194659.GA11399@dose.home.local> <20090421073219.GA5866@dose.home.local> <20090421183936.GA21935@dose.home.local> <20090424142113.GA18668@dose.home.local> <20090428002309.GA29572@x61> <20090506222753.GA6728@mac.home> <20090507072352.GA6513@mac.home> Reply-To: ncunningham-lkml@crca.org.au Mime-Version: 1.0 Content-Type: text/plain Content-Transfer-Encoding: 7bit Return-path: In-Reply-To: Sender: linux-kernel-owner@vger.kernel.org To: Takashi Iwai Cc: Tino Keitel , linux-kernel@vger.kernel.org, alsa-devel@alsa-project.org List-Id: alsa-devel@alsa-project.org Hi. On Thu, 2009-05-07 at 12:45 +0200, Takashi Iwai wrote: > The problem is that BIOS on your machine sets this pin both for > input and output. Since it's set as input, the driver respects > the BIOS setup and skips to override. 'scuse the ignorance, but this makes me ask: Are pins logically unrelated to jacks? I have a Dell M1530, and it has some jacks that can work as either inputs or outputs. Under M$, when I plug something in, a dialog box pops up asking me whether I connected a mic, line in or an output jack (I forget the details). Sounds like Tino's problem is what I'd expect from my BIOS. But I'm probably completely ignorant :) Regards, Nigel