From: Sascha Hauer <s.hauer@pengutronix.de>
To: alsa-devel@alsa-project.org
Cc: Sascha Hauer <s.hauer@pengutronix.de>,
Mark Brown <broonie@opensource.wolfsonmicro.com>,
Valentin Longchamp <valentin.longchamp@epfl.ch>
Subject: [PATCH 3/3] imx-ssi: Use a hrtimer in FIQ mode
Date: Thu, 8 Apr 2010 11:31:26 +0200 [thread overview]
Message-ID: <1270719086-23453-4-git-send-email-s.hauer@pengutronix.de> (raw)
In-Reply-To: <1270719086-23453-1-git-send-email-s.hauer@pengutronix.de>
Using a regular timer results in poll times < 1 jiffie with small
buffers, so we loaded the timer with the actual jiffie value. We can
be more accurate using a hrtimer. Also, we have to call
snd_pcm_period_elapsed after playing period_bytes and not
runtime->period_size (which is in samples and not in bytes).
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
---
sound/soc/imx/imx-pcm-fiq.c | 45 ++++++++++++++++++++----------------------
1 files changed, 21 insertions(+), 24 deletions(-)
diff --git a/sound/soc/imx/imx-pcm-fiq.c b/sound/soc/imx/imx-pcm-fiq.c
index f96a373..2646e05 100644
--- a/sound/soc/imx/imx-pcm-fiq.c
+++ b/sound/soc/imx/imx-pcm-fiq.c
@@ -39,20 +39,17 @@ struct imx_pcm_runtime_data {
unsigned long offset;
unsigned long last_offset;
unsigned long size;
- struct timer_list timer;
- int poll_time;
+ struct hrtimer hrt;
+ int poll_time_ns;
+ struct snd_pcm_substream *substream;
};
-static inline void imx_ssi_set_next_poll(struct imx_pcm_runtime_data *iprtd)
+static enum hrtimer_restart snd_hrtimer_callback(struct hrtimer *hrt)
{
- iprtd->timer.expires = jiffies + iprtd->poll_time;
-}
-
-static void imx_ssi_timer_callback(unsigned long data)
-{
- struct snd_pcm_substream *substream = (void *)data;
+ struct imx_pcm_runtime_data *iprtd =
+ container_of(hrt, struct imx_pcm_runtime_data, hrt);
+ struct snd_pcm_substream *substream = iprtd->substream;
struct snd_pcm_runtime *runtime = substream->runtime;
- struct imx_pcm_runtime_data *iprtd = runtime->private_data;
struct pt_regs regs;
unsigned long delta;
@@ -72,16 +69,14 @@ static void imx_ssi_timer_callback(unsigned long data)
/* If we've transferred at least a period then report it and
* reset our poll time */
- if (delta >= runtime->period_size) {
+ if (delta >= iprtd->period) {
snd_pcm_period_elapsed(substream);
iprtd->last_offset = iprtd->offset;
-
- imx_ssi_set_next_poll(iprtd);
}
- /* Restart the timer; if we didn't report we'll run on the next tick */
- add_timer(&iprtd->timer);
+ hrtimer_forward_now(hrt, ns_to_ktime(iprtd->poll_time_ns));
+ return HRTIMER_RESTART;
}
static struct fiq_handler fh = {
@@ -99,8 +94,8 @@ static int snd_imx_pcm_hw_params(struct snd_pcm_substream *substream,
iprtd->period = params_period_bytes(params) ;
iprtd->offset = 0;
iprtd->last_offset = 0;
- iprtd->poll_time = HZ / (params_rate(params) / params_period_size(params));
-
+ iprtd->poll_time_ns = 1000000000 / params_rate(params) *
+ params_period_size(params);
snd_pcm_set_runtime_buffer(substream, &substream->dma_buffer);
return 0;
@@ -135,8 +130,8 @@ static int snd_imx_pcm_trigger(struct snd_pcm_substream *substream, int cmd)
case SNDRV_PCM_TRIGGER_START:
case SNDRV_PCM_TRIGGER_RESUME:
case SNDRV_PCM_TRIGGER_PAUSE_RELEASE:
- imx_ssi_set_next_poll(iprtd);
- add_timer(&iprtd->timer);
+ hrtimer_start(&iprtd->hrt, ns_to_ktime(iprtd->poll_time_ns),
+ HRTIMER_MODE_REL);
if (++fiq_enable == 1)
enable_fiq(imx_pcm_fiq);
@@ -145,7 +140,7 @@ static int snd_imx_pcm_trigger(struct snd_pcm_substream *substream, int cmd)
case SNDRV_PCM_TRIGGER_STOP:
case SNDRV_PCM_TRIGGER_SUSPEND:
case SNDRV_PCM_TRIGGER_PAUSE_PUSH:
- del_timer(&iprtd->timer);
+ hrtimer_cancel(&iprtd->hrt);
if (--fiq_enable == 0)
disable_fiq(imx_pcm_fiq);
@@ -194,9 +189,10 @@ static int snd_imx_open(struct snd_pcm_substream *substream)
iprtd = kzalloc(sizeof(*iprtd), GFP_KERNEL);
runtime->private_data = iprtd;
- init_timer(&iprtd->timer);
- iprtd->timer.data = (unsigned long)substream;
- iprtd->timer.function = imx_ssi_timer_callback;
+ iprtd->substream = substream;
+
+ hrtimer_init(&iprtd->hrt, CLOCK_MONOTONIC, HRTIMER_MODE_REL);
+ iprtd->hrt.function = snd_hrtimer_callback;
ret = snd_pcm_hw_constraint_integer(substream->runtime,
SNDRV_PCM_HW_PARAM_PERIODS);
@@ -212,7 +208,8 @@ static int snd_imx_close(struct snd_pcm_substream *substream)
struct snd_pcm_runtime *runtime = substream->runtime;
struct imx_pcm_runtime_data *iprtd = runtime->private_data;
- del_timer_sync(&iprtd->timer);
+ hrtimer_cancel(&iprtd->hrt);
+
kfree(iprtd);
return 0;
--
1.7.0
next prev parent reply other threads:[~2010-04-08 9:31 UTC|newest]
Thread overview: 15+ messages / expand[flat|nested] mbox.gz Atom feed top
2010-04-08 9:31 imx-ssi fixes Sascha Hauer
2010-04-08 9:31 ` [PATCH 1/3] imx-ssi: honor IMX_SSI_DMA flag Sascha Hauer
2010-04-08 9:31 ` [PATCH 2/3] imx-pcm-dma-mx2: restart DMA after an error Sascha Hauer
2010-04-08 9:31 ` Sascha Hauer [this message]
2010-04-08 9:53 ` [PATCH 3/3] imx-ssi: Use a hrtimer in FIQ mode Mark Brown
2010-04-08 13:13 ` Sascha Hauer
2010-04-08 13:30 ` Liam Girdwood
2010-04-08 15:40 ` Sascha Hauer
2010-04-08 14:03 ` Mark Brown
2010-04-08 15:14 ` Liam Girdwood
2010-04-08 15:45 ` Mark Brown
2010-04-08 15:29 ` Valentin Longchamp
2010-04-08 14:47 ` imx-ssi fixes Mark Brown
2010-04-08 15:51 ` Sascha Hauer
2010-04-08 15:54 ` Mark Brown
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1270719086-23453-4-git-send-email-s.hauer@pengutronix.de \
--to=s.hauer@pengutronix.de \
--cc=alsa-devel@alsa-project.org \
--cc=broonie@opensource.wolfsonmicro.com \
--cc=valentin.longchamp@epfl.ch \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).