[PATCH 024/199] Documentation/sound/alsa/emu10k1-jack.txt: Checkpatch cleanup

[PATCH 024/199] Documentation/sound/alsa/emu10k1-jack.txt: Checkpatch cleanup

[Andrea Gelmini]

Documentation/sound/alsa/emu10k1-jack.txt:3: ERROR: trailing whitespace
Documentation/sound/alsa/emu10k1-jack.txt:39: ERROR: trailing whitespace
Documentation/sound/alsa/emu10k1-jack.txt:58: ERROR: trailing whitespace

Signed-off-by: Andrea Gelmini <andrea.gelmini@gelma.net>
---
 Documentation/sound/alsa/emu10k1-jack.txt |    6 +++---
 1 files changed, 3 insertions(+), 3 deletions(-)

diff --git a/Documentation/sound/alsa/emu10k1-jack.txt b/Documentation/sound/alsa/emu10k1-jack.txt
index 751d450..3cc6548 100644
--- a/Documentation/sound/alsa/emu10k1-jack.txt
+++ b/Documentation/sound/alsa/emu10k1-jack.txt
@@ -1,6 +1,6 @@
 This document is a guide to using the emu10k1 based devices with JACK for low
 latency, multichannel recording functionality.  All of my recent work to allow
-Linux users to use the full capabilities of their hardware has been inspired 
+Linux users to use the full capabilities of their hardware has been inspired
 by the kX Project.  Without their work I never would have discovered the true
 power of this hardware.
 
@@ -36,7 +36,7 @@ The 16 input ports are connected to the 16 physical inputs.  Contrary to
 popular belief, all emu10k1 cards are multichannel cards.  Which of these
 input channels have physical inputs connected to them depends on the card
 model.  Trial and error is highly recommended; the pinout diagrams
-for the card have been reverse engineered by some enterprising kX users and are 
+for the card have been reverse engineered by some enterprising kX users and are
 available on the internet.  Meterbridge is helpful here, and the kX forums are
 packed with useful information.
 
@@ -55,7 +55,7 @@ JACK		Epilog		FXBUS2(nr)
 --------------------------------------------
 capture_1	asio14		FXBUS2(0xe)
 capture_2	asio15		FXBUS2(0xf)
-capture_3	asio0		FXBUS2(0x0)	
+capture_3	asio0		FXBUS2(0x0)
 ~capture_4	Center		EXTOUT(0x11)	// mapped to by Center
 ~capture_5	LFE		EXTOUT(0x12)	// mapped to by LFE
 capture_6	asio3		FXBUS2(0x3)
-- 
1.7.1.251.gf80a2

[PATCH 091/199] Documentation/sound/alsa/serial-u16550.txt: Checkpatch cleanup

[Andrea Gelmini]

Documentation/sound/alsa/serial-u16550.txt:72: ERROR: trailing whitespace
Documentation/sound/alsa/serial-u16550.txt:77: ERROR: trailing whitespace

Signed-off-by: Andrea Gelmini <andrea.gelmini@gelma.net>
---
 Documentation/sound/alsa/serial-u16550.txt |    4 ++--
 1 files changed, 2 insertions(+), 2 deletions(-)

diff --git a/Documentation/sound/alsa/serial-u16550.txt b/Documentation/sound/alsa/serial-u16550.txt
index c191955..6ad3e66 100644
--- a/Documentation/sound/alsa/serial-u16550.txt
+++ b/Documentation/sound/alsa/serial-u16550.txt
@@ -69,12 +69,12 @@ Usage example for M/B mode:
 
 The MS-124W hardware's M/A mode is currently not supported. This mode allows
 the MIDI Outs to act independently at double the aggregate throughput of M/B,
-but does not allow sending the same byte simultaneously to multiple MIDI Outs. 
+but does not allow sending the same byte simultaneously to multiple MIDI Outs.
 The M/A protocol requires the driver to twiddle the modem control lines under
 timing constraints, so it would be a bit more complicated to implement than
 the other modes.
 
-Midiator models other than MS-124W and MS-124T are currently not supported. 
+Midiator models other than MS-124W and MS-124T are currently not supported.
 Note that the suffix letter is significant; the MS-124 and MS-124B are not
 compatible, nor are the other known models MS-101, MS-101B, MS-103, and MS-114.
 I do have documentation (tim.mann@compaq.com) that partially covers these models,
-- 
1.7.1.251.gf80a2