alsa-devel.alsa-project.org archive mirror
 help / color / mirror / Atom feed
From: Liam Girdwood <lrg@slimlogic.co.uk>
To: Peter Ujfalusi <peter.ujfalusi@nokia.com>
Cc: alsa-devel@alsa-project.org, broonie@opensource.wolfsonmicro.com
Subject: Re: [PATCH 5/7] ASoC: TWL4030: Helper to check chip default registers
Date: Tue, 25 May 2010 12:57:24 +0100	[thread overview]
Message-ID: <1274788644.3000.151.camel@odin> (raw)
In-Reply-To: <1274787248-18583-6-git-send-email-peter.ujfalusi@nokia.com>

On Tue, 2010-05-25 at 14:34 +0300, Peter Ujfalusi wrote:
> Since the twl4030 codec driver supports different version
> of the PM chip, a helper function can come handy, which
> can check the driver's default versus the chip values.
> 
> Signed-off-by: Peter Ujfalusi <peter.ujfalusi@nokia.com>
> ---
>  sound/soc/codecs/twl4030.c |   23 +++++++++++++++++++++++
>  sound/soc/codecs/twl4030.h |    1 +
>  2 files changed, 24 insertions(+), 0 deletions(-)
> 
> diff --git a/sound/soc/codecs/twl4030.c b/sound/soc/codecs/twl4030.c
> index 08f24de..4220c8d 100644
> --- a/sound/soc/codecs/twl4030.c
> +++ b/sound/soc/codecs/twl4030.c
> @@ -243,6 +243,25 @@ static void twl4030_codec_enable(struct snd_soc_codec *codec, int enable)
>  	udelay(10);
>  }
>  
> +static inline void twl4030_check_defaults(struct snd_soc_codec *codec)
> +{
> +	int i, difference = 0;
> +	u8 val;
> +
> +	dev_info(codec->dev, "Checking TWL audio default configuration\n");
> +	for (i = 1; i <= TWL4030_REG_MISC_SET_2; i++) {
> +		twl4030_i2c_read_u8(TWL4030_MODULE_AUDIO_VOICE, &val, i);
> +		if (val != twl4030_reg[i]) {
> +			difference++;
> +			dev_info(codec->dev,
> +				 "Reg 0x%02x: chip: 0x%02x driver: 0x%02x\n",
> +				 i, val, twl4030_reg[i]);
> +		}
> +	}
> +	dev_info(codec->dev, "Found %d non maching registers. %s\n",

matching

> +		 difference, difference ? "Not OK" : "OK");
> +}
> +
>  static void twl4030_init_chip(struct platform_device *pdev)
>  {
>  	struct snd_soc_device *socdev = platform_get_drvdata(pdev);
> @@ -252,6 +271,10 @@ static void twl4030_init_chip(struct platform_device *pdev)
>  	u8 reg, byte;
>  	int i = 0;
>  
> +	/* Check defaults, if instructed before anythiing else */
> +	if (setup && setup->check_defaults)
> +		twl4030_check_defaults(codec);
> +

Is this purely for information/debug purposes ?

Why do we need to check default vales at init(). Is there another driver
changing the audio codec registers ?

Thanks

Liam
-- 
Freelance Developer, SlimLogic Ltd
ASoC and Voltage Regulator Maintainer.
http://www.slimlogic.co.uk

  reply	other threads:[~2010-05-25 11:57 UTC|newest]

Thread overview: 17+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2010-05-25 11:34 [PATCH 0/7] ASoC: TWL4030: put the codec to off when not active Peter Ujfalusi
2010-05-25 11:34 ` [PATCH 1/7] ASoC: TWL4030: Revisit codec defaults Peter Ujfalusi
2010-05-25 11:34 ` [PATCH 2/7] ASoC: TWL4030: Remove wrapper for power down Peter Ujfalusi
2010-05-25 11:34 ` [PATCH 3/7] ASoC: TWL4030: Make offset cancellation path configurable Peter Ujfalusi
2010-05-25 11:59   ` Peter Ujfalusi
2010-05-25 11:34 ` [PATCH 4/7] ASoC: TWL4030: Optimize the power up sequence Peter Ujfalusi
2010-05-25 11:34 ` [PATCH 5/7] ASoC: TWL4030: Helper to check chip default registers Peter Ujfalusi
2010-05-25 11:57   ` Liam Girdwood [this message]
2010-05-25 12:20     ` Peter Ujfalusi
2010-05-25 13:09       ` Liam Girdwood
2010-05-26  6:00         ` Peter Ujfalusi
2010-05-26  6:28           ` Peter Ujfalusi
2010-05-26  6:35             ` Mark Brown
2010-05-26  7:15               ` Peter Ujfalusi
2010-05-25 11:34 ` [PATCH 6/7] ASoC: TWL4030: Correct the ARXR2_APGA_CTL chip default Peter Ujfalusi
2010-05-25 11:34 ` [PATCH 7/7] ASoC: TWL4030: Use BIAS_OFF instead of BIAS_STANDBY, when not in use Peter Ujfalusi
2010-05-25 17:35 ` [PATCH 0/7] ASoC: TWL4030: put the codec to off when not active Mark Brown

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=1274788644.3000.151.camel@odin \
    --to=lrg@slimlogic.co.uk \
    --cc=alsa-devel@alsa-project.org \
    --cc=broonie@opensource.wolfsonmicro.com \
    --cc=peter.ujfalusi@nokia.com \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).