From: Peter Ujfalusi <peter.ujfalusi@nokia.com>
To: alsa-devel@alsa-project.org, linux-omap@vger.kernel.org
Cc: tony@atomide.com, broonie@opensource.wolfsonmicro.com,
eduardo.valentin@nokia.com, ext-eero.nurkkala@nokia.com,
lrg@slimlogic.co.uk
Subject: [RFC PATCH 4/5] ASoC: omap-mcbsp: Save, and use wlen for threshold configuration
Date: Mon, 31 May 2010 11:16:49 +0300 [thread overview]
Message-ID: <1275293810-31984-5-git-send-email-peter.ujfalusi@nokia.com> (raw)
In-Reply-To: <1275293810-31984-1-git-send-email-peter.ujfalusi@nokia.com>
Save the word length configuration of McBSP, and use that information
to calculate, and configure the threshold in McBSP.
Previously the calculation was only correct when the stream had 16bit
audio.
Signed-off-by: Peter Ujfalusi <peter.ujfalusi@nokia.com>
---
sound/soc/omap/omap-mcbsp.c | 14 +++++++++-----
1 files changed, 9 insertions(+), 5 deletions(-)
diff --git a/sound/soc/omap/omap-mcbsp.c b/sound/soc/omap/omap-mcbsp.c
index 6f44cb4..b06d8f1 100644
--- a/sound/soc/omap/omap-mcbsp.c
+++ b/sound/soc/omap/omap-mcbsp.c
@@ -59,6 +59,7 @@ struct omap_mcbsp_data {
int configured;
unsigned int in_freq;
int clk_div;
+ int wlen;
};
#define to_mcbsp(priv) container_of((priv), struct omap_mcbsp_data, bus_id)
@@ -155,19 +156,21 @@ static void omap_mcbsp_set_threshold(struct snd_pcm_substream *substream)
struct snd_soc_dai *cpu_dai = rtd->dai->cpu_dai;
struct omap_mcbsp_data *mcbsp_data = to_mcbsp(cpu_dai->private_data);
int dma_op_mode = omap_mcbsp_get_dma_op_mode(mcbsp_data->bus_id);
- int samples;
+ int words;
/* TODO: Currently, MODE_ELEMENT == MODE_FRAME */
if (dma_op_mode == MCBSP_DMA_MODE_THRESHOLD)
- samples = snd_pcm_lib_period_bytes(substream) >> 1;
+ /* The FIFO size depends on the McBSP word configuration */
+ words = snd_pcm_lib_period_bytes(substream) /
+ (mcbsp_data->wlen / 8);
else
- samples = 1;
+ words = 1;
/* Configure McBSP internal buffer usage */
if (substream->stream == SNDRV_PCM_STREAM_PLAYBACK)
- omap_mcbsp_set_tx_threshold(mcbsp_data->bus_id, samples - 1);
+ omap_mcbsp_set_tx_threshold(mcbsp_data->bus_id, words);
else
- omap_mcbsp_set_rx_threshold(mcbsp_data->bus_id, samples - 1);
+ omap_mcbsp_set_rx_threshold(mcbsp_data->bus_id, words);
}
static int omap_mcbsp_dai_startup(struct snd_pcm_substream *substream,
@@ -409,6 +412,7 @@ static int omap_mcbsp_dai_hw_params(struct snd_pcm_substream *substream,
}
omap_mcbsp_config(bus_id, &mcbsp_data->regs);
+ mcbsp_data->wlen = wlen;
mcbsp_data->configured = 1;
return 0;
--
1.7.1
next prev parent reply other threads:[~2010-05-31 8:16 UTC|newest]
Thread overview: 22+ messages / expand[flat|nested] mbox.gz Atom feed top
2010-05-31 8:16 [RFC PATCH 0/5] OMAP/ASoC: McBSP: FIFO handling related fixes Peter Ujfalusi
2010-05-31 8:16 ` [RFC PATCH 1/5] OMAP: McBSP: Function to query the FIFO size Peter Ujfalusi
2010-05-31 8:16 ` [RFC PATCH 2/5] OMAP3: McBSP: Change the way how the FIFO is handled Peter Ujfalusi
2010-05-31 17:41 ` Nishanth Menon
2010-06-01 6:59 ` Peter Ujfalusi
2010-06-02 4:24 ` Nishanth Menon
2010-05-31 8:16 ` [RFC PATCH 3/5] OMAP3: McBSP: Use the port's buffer_size when calculating tx delay Peter Ujfalusi
2010-05-31 8:16 ` Peter Ujfalusi [this message]
2010-05-31 8:16 ` [RFC PATCH 5/5] ASoC: omap-mcbsp: Place correct constraints for streams Peter Ujfalusi
2010-05-31 8:41 ` Peter Ujfalusi
2010-05-31 10:00 ` [alsa-devel] " Liam Girdwood
2010-05-31 11:57 ` Peter Ujfalusi
2010-06-01 6:38 ` Jarkko Nikula
2010-06-01 6:47 ` Peter Ujfalusi
2010-06-01 7:38 ` Jarkko Nikula
2010-06-01 8:07 ` Peter Ujfalusi
2010-06-01 8:19 ` Peter Ujfalusi
2010-06-01 9:29 ` Jarkko Nikula
2010-06-01 10:30 ` Peter Ujfalusi
2010-06-01 11:20 ` [alsa-devel] " Jarkko Nikula
2010-06-01 11:34 ` Peter Ujfalusi
-- strict thread matches above, loose matches on Subject: below --
2010-05-31 8:03 [RFC PATCH 0/5] OMAP/ASoC: McBSP: FIFO handling related fixes Peter Ujfalusi
2010-05-31 8:03 ` [RFC PATCH 4/5] ASoC: omap-mcbsp: Save, and use wlen for threshold configuration Peter Ujfalusi
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1275293810-31984-5-git-send-email-peter.ujfalusi@nokia.com \
--to=peter.ujfalusi@nokia.com \
--cc=alsa-devel@alsa-project.org \
--cc=broonie@opensource.wolfsonmicro.com \
--cc=eduardo.valentin@nokia.com \
--cc=ext-eero.nurkkala@nokia.com \
--cc=linux-omap@vger.kernel.org \
--cc=lrg@slimlogic.co.uk \
--cc=tony@atomide.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).