* [PATCH] ASoC: Fix cut'n'paste comment in WM8994
@ 2010-09-06 15:22 Mark Brown
2010-09-06 15:35 ` Liam Girdwood
0 siblings, 1 reply; 2+ messages in thread
From: Mark Brown @ 2010-09-06 15:22 UTC (permalink / raw)
To: Liam Girdwood; +Cc: alsa-devel, patches, Mark Brown
Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
---
sound/soc/codecs/wm8994.c | 2 +-
1 files changed, 1 insertions(+), 1 deletions(-)
diff --git a/sound/soc/codecs/wm8994.c b/sound/soc/codecs/wm8994.c
index a3d9145..218bcd2 100644
--- a/sound/soc/codecs/wm8994.c
+++ b/sound/soc/codecs/wm8994.c
@@ -3810,7 +3810,7 @@ static void wm8994_handle_pdata(struct wm8994_priv *wm8994)
*
* Enable microphone detection via IRQ on the WM8994. If GPIOs are
* being used to bring out signals to the processor then only platform
- * data configuration is needed for WM8903 and processor GPIOs should
+ * data configuration is needed for WM8994 and processor GPIOs should
* be configured using snd_soc_jack_add_gpios() instead.
*
* Configuration of detection levels is available via the micbias1_lvl
--
1.7.1
^ permalink raw reply related [flat|nested] 2+ messages in thread
* Re: [PATCH] ASoC: Fix cut'n'paste comment in WM8994
2010-09-06 15:22 [PATCH] ASoC: Fix cut'n'paste comment in WM8994 Mark Brown
@ 2010-09-06 15:35 ` Liam Girdwood
0 siblings, 0 replies; 2+ messages in thread
From: Liam Girdwood @ 2010-09-06 15:35 UTC (permalink / raw)
To: Mark Brown; +Cc: alsa-devel, patches
On Mon, 2010-09-06 at 16:22 +0100, Mark Brown wrote:
> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
> ---
> sound/soc/codecs/wm8994.c | 2 +-
> 1 files changed, 1 insertions(+), 1 deletions(-)
>
> diff --git a/sound/soc/codecs/wm8994.c b/sound/soc/codecs/wm8994.c
> index a3d9145..218bcd2 100644
> --- a/sound/soc/codecs/wm8994.c
> +++ b/sound/soc/codecs/wm8994.c
> @@ -3810,7 +3810,7 @@ static void wm8994_handle_pdata(struct wm8994_priv *wm8994)
> *
> * Enable microphone detection via IRQ on the WM8994. If GPIOs are
> * being used to bring out signals to the processor then only platform
> - * data configuration is needed for WM8903 and processor GPIOs should
> + * data configuration is needed for WM8994 and processor GPIOs should
> * be configured using snd_soc_jack_add_gpios() instead.
> *
> * Configuration of detection levels is available via the micbias1_lvl
Acked-by: Liam Girdwood <lrg@slimlogic.co.uk>
--
Freelance Developer, SlimLogic Ltd
ASoC and Voltage Regulator Maintainer.
http://www.slimlogic.co.uk
^ permalink raw reply [flat|nested] 2+ messages in thread
end of thread, other threads:[~2010-09-06 15:35 UTC | newest]
Thread overview: 2+ messages (download: mbox.gz follow: Atom feed
-- links below jump to the message on this page --
2010-09-06 15:22 [PATCH] ASoC: Fix cut'n'paste comment in WM8994 Mark Brown
2010-09-06 15:35 ` Liam Girdwood
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).