From: Dimitris Papastamos <dp@opensource.wolfsonmicro.com>
To: Mark Brown <broonie@opensource.wolfsonmicro.com>,
Liam Girdwood <lrg@slimlogic.co.uk>
Cc: alsa-devel@alsa-project.org, patches@opensource.wolfsonmicro.com
Subject: [PATCH] ASoC: Remove unneeded use of spi_bus_type
Date: Wed, 29 Sep 2010 11:48:19 +0100 [thread overview]
Message-ID: <1285757299-2065-1-git-send-email-dp@opensource.wolfsonmicro.com> (raw)
No need to explicitly set the bus type, spi_register_driver does
that for us.
Signed-off-by: Dimitris Papastamos <dp@opensource.wolfsonmicro.com>
---
sound/soc/codecs/wm8510.c | 1 -
sound/soc/codecs/wm8711.c | 1 -
sound/soc/codecs/wm8728.c | 1 -
sound/soc/codecs/wm8731.c | 1 -
sound/soc/codecs/wm8750.c | 1 -
sound/soc/codecs/wm8753.c | 1 -
sound/soc/codecs/wm8776.c | 1 -
sound/soc/codecs/wm8900.c | 1 -
sound/soc/codecs/wm8985.c | 1 -
sound/soc/codecs/wm8988.c | 1 -
10 files changed, 0 insertions(+), 10 deletions(-)
diff --git a/sound/soc/codecs/wm8510.c b/sound/soc/codecs/wm8510.c
index 02ecf54..8f10709 100644
--- a/sound/soc/codecs/wm8510.c
+++ b/sound/soc/codecs/wm8510.c
@@ -627,7 +627,6 @@ static int __devexit wm8510_spi_remove(struct spi_device *spi)
static struct spi_driver wm8510_spi_driver = {
.driver = {
.name = "wm8510",
- .bus = &spi_bus_type,
.owner = THIS_MODULE,
},
.probe = wm8510_spi_probe,
diff --git a/sound/soc/codecs/wm8711.c b/sound/soc/codecs/wm8711.c
index 52a923a..54fbd76 100644
--- a/sound/soc/codecs/wm8711.c
+++ b/sound/soc/codecs/wm8711.c
@@ -453,7 +453,6 @@ static int __devexit wm8711_spi_remove(struct spi_device *spi)
static struct spi_driver wm8711_spi_driver = {
.driver = {
.name = "wm8711-codec",
- .bus = &spi_bus_type,
.owner = THIS_MODULE,
},
.probe = wm8711_spi_probe,
diff --git a/sound/soc/codecs/wm8728.c b/sound/soc/codecs/wm8728.c
index 32eba85..075f35e 100644
--- a/sound/soc/codecs/wm8728.c
+++ b/sound/soc/codecs/wm8728.c
@@ -307,7 +307,6 @@ static int __devexit wm8728_spi_remove(struct spi_device *spi)
static struct spi_driver wm8728_spi_driver = {
.driver = {
.name = "wm8728-codec",
- .bus = &spi_bus_type,
.owner = THIS_MODULE,
},
.probe = wm8728_spi_probe,
diff --git a/sound/soc/codecs/wm8731.c b/sound/soc/codecs/wm8731.c
index bdce125..6313858 100644
--- a/sound/soc/codecs/wm8731.c
+++ b/sound/soc/codecs/wm8731.c
@@ -600,7 +600,6 @@ static int __devexit wm8731_spi_remove(struct spi_device *spi)
static struct spi_driver wm8731_spi_driver = {
.driver = {
.name = "wm8731-codec",
- .bus = &spi_bus_type,
.owner = THIS_MODULE,
},
.probe = wm8731_spi_probe,
diff --git a/sound/soc/codecs/wm8750.c b/sound/soc/codecs/wm8750.c
index 4d1ec9d..6c924cd 100644
--- a/sound/soc/codecs/wm8750.c
+++ b/sound/soc/codecs/wm8750.c
@@ -782,7 +782,6 @@ static int __devexit wm8750_spi_remove(struct spi_device *spi)
static struct spi_driver wm8750_spi_driver = {
.driver = {
.name = "wm8750-codec",
- .bus = &spi_bus_type,
.owner = THIS_MODULE,
},
.probe = wm8750_spi_probe,
diff --git a/sound/soc/codecs/wm8753.c b/sound/soc/codecs/wm8753.c
index 64ea066..8f679a1 100644
--- a/sound/soc/codecs/wm8753.c
+++ b/sound/soc/codecs/wm8753.c
@@ -1651,7 +1651,6 @@ static int __devexit wm8753_spi_remove(struct spi_device *spi)
static struct spi_driver wm8753_spi_driver = {
.driver = {
.name = "wm8753-codec",
- .bus = &spi_bus_type,
.owner = THIS_MODULE,
},
.probe = wm8753_spi_probe,
diff --git a/sound/soc/codecs/wm8776.c b/sound/soc/codecs/wm8776.c
index c0b6917..04182c4 100644
--- a/sound/soc/codecs/wm8776.c
+++ b/sound/soc/codecs/wm8776.c
@@ -483,7 +483,6 @@ static int __devexit wm8776_spi_remove(struct spi_device *spi)
static struct spi_driver wm8776_spi_driver = {
.driver = {
.name = "wm8776-codec",
- .bus = &spi_bus_type,
.owner = THIS_MODULE,
},
.probe = wm8776_spi_probe,
diff --git a/sound/soc/codecs/wm8900.c b/sound/soc/codecs/wm8900.c
index 25c8ccd..b4f1172 100644
--- a/sound/soc/codecs/wm8900.c
+++ b/sound/soc/codecs/wm8900.c
@@ -1291,7 +1291,6 @@ static int __devexit wm8900_spi_remove(struct spi_device *spi)
static struct spi_driver wm8900_spi_driver = {
.driver = {
.name = "wm8900-codec",
- .bus = &spi_bus_type,
.owner = THIS_MODULE,
},
.probe = wm8900_spi_probe,
diff --git a/sound/soc/codecs/wm8985.c b/sound/soc/codecs/wm8985.c
index bd109c4..04ec1fe 100644
--- a/sound/soc/codecs/wm8985.c
+++ b/sound/soc/codecs/wm8985.c
@@ -1145,7 +1145,6 @@ static int __devexit wm8985_spi_remove(struct spi_device *spi)
static struct spi_driver wm8985_spi_driver = {
.driver = {
.name = "wm8985",
- .bus = &spi_bus_type,
.owner = THIS_MODULE,
},
.probe = wm8985_spi_probe,
diff --git a/sound/soc/codecs/wm8988.c b/sound/soc/codecs/wm8988.c
index d08b1fe..d7f2597 100644
--- a/sound/soc/codecs/wm8988.c
+++ b/sound/soc/codecs/wm8988.c
@@ -844,7 +844,6 @@ static int __devexit wm8988_spi_remove(struct spi_device *spi)
static struct spi_driver wm8988_spi_driver = {
.driver = {
.name = "wm8988-codec",
- .bus = &spi_bus_type,
.owner = THIS_MODULE,
},
.probe = wm8988_spi_probe,
--
1.7.3
next reply other threads:[~2010-09-29 10:48 UTC|newest]
Thread overview: 3+ messages / expand[flat|nested] mbox.gz Atom feed top
2010-09-29 10:48 Dimitris Papastamos [this message]
2010-09-30 19:29 ` [PATCH] ASoC: Remove unneeded use of spi_bus_type Liam Girdwood
2010-09-30 20:34 ` Mark Brown
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1285757299-2065-1-git-send-email-dp@opensource.wolfsonmicro.com \
--to=dp@opensource.wolfsonmicro.com \
--cc=alsa-devel@alsa-project.org \
--cc=broonie@opensource.wolfsonmicro.com \
--cc=lrg@slimlogic.co.uk \
--cc=patches@opensource.wolfsonmicro.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox