From: Dimitris Papastamos <dp@opensource.wolfsonmicro.com>
To: Mark Brown <broonie@opensource.wolfsonmicro.com>,
Liam Girdwood <lrg@slimlogic.co.uk>
Cc: alsa-devel@alsa-project.org, patches@opensource.wolfsonmicro.com
Subject: [PATCH] ASoC: soc-cache: Add spi_write support for all I/O types
Date: Mon, 4 Oct 2010 11:25:13 +0100 [thread overview]
Message-ID: <1286187913-6600-1-git-send-email-dp@opensource.wolfsonmicro.com> (raw)
Ensure that all drivers that use SPI and I2C will work properly
by providing SPI write functions for all different I/O types.
Signed-off-by: Dimitris Papastamos <dp@opensource.wolfsonmicro.com>
---
sound/soc/soc-cache.c | 96 +++++++++++++++++++++++++++++++++++++++++++++++++
1 files changed, 96 insertions(+), 0 deletions(-)
diff --git a/sound/soc/soc-cache.c b/sound/soc/soc-cache.c
index 62f1e2b..d214f02 100644
--- a/sound/soc/soc-cache.c
+++ b/sound/soc/soc-cache.c
@@ -211,6 +211,36 @@ static unsigned int snd_soc_8_8_read(struct snd_soc_codec *codec,
return cache[reg];
}
+#if defined(CONFIG_SPI_MASTER)
+static int snd_soc_8_8_spi_write(void *control_data, const char *data,
+ int len)
+{
+ struct spi_device *spi = control_data;
+ struct spi_transfer t;
+ struct spi_message m;
+ u8 msg[2];
+
+ if (len <= 0)
+ return 0;
+
+ msg[0] = data[0];
+ msg[1] = data[1];
+
+ spi_message_init(&m);
+ memset(&t, 0, (sizeof t));
+
+ t.tx_buf = &msg[0];
+ t.len = len;
+
+ spi_message_add_tail(&t, &m);
+ spi_sync(spi, &m);
+
+ return len;
+}
+#else
+#define snd_soc_8_8_spi_write NULL
+#endif
+
static int snd_soc_8_16_write(struct snd_soc_codec *codec, unsigned int reg,
unsigned int value)
{
@@ -254,6 +284,37 @@ static unsigned int snd_soc_8_16_read(struct snd_soc_codec *codec,
}
}
+#if defined(CONFIG_SPI_MASTER)
+static int snd_soc_8_16_spi_write(void *control_data, const char *data,
+ int len)
+{
+ struct spi_device *spi = control_data;
+ struct spi_transfer t;
+ struct spi_message m;
+ u8 msg[3];
+
+ if (len <= 0)
+ return 0;
+
+ msg[0] = data[0];
+ msg[1] = data[1];
+ msg[2] = data[2];
+
+ spi_message_init(&m);
+ memset(&t, 0, (sizeof t));
+
+ t.tx_buf = &msg[0];
+ t.len = len;
+
+ spi_message_add_tail(&t, &m);
+ spi_sync(spi, &m);
+
+ return len;
+}
+#else
+#define snd_soc_8_16_spi_write NULL
+#endif
+
#if defined(CONFIG_I2C) || (defined(CONFIG_I2C_MODULE) && defined(MODULE))
static unsigned int snd_soc_8_8_read_i2c(struct snd_soc_codec *codec,
unsigned int r)
@@ -518,6 +579,38 @@ static int snd_soc_16_16_write(struct snd_soc_codec *codec, unsigned int reg,
return -EIO;
}
+#if defined(CONFIG_SPI_MASTER)
+static int snd_soc_16_16_spi_write(void *control_data, const char *data,
+ int len)
+{
+ struct spi_device *spi = control_data;
+ struct spi_transfer t;
+ struct spi_message m;
+ u8 msg[4];
+
+ if (len <= 0)
+ return 0;
+
+ msg[0] = data[0];
+ msg[1] = data[1];
+ msg[2] = data[2];
+ msg[3] = data[3];
+
+ spi_message_init(&m);
+ memset(&t, 0, (sizeof t));
+
+ t.tx_buf = &msg[0];
+ t.len = len;
+
+ spi_message_add_tail(&t, &m);
+ spi_sync(spi, &m);
+
+ return len;
+}
+#else
+#define snd_soc_16_16_spi_write NULL
+#endif
+
static struct {
int addr_bits;
int data_bits;
@@ -540,11 +633,13 @@ static struct {
.addr_bits = 8, .data_bits = 8,
.write = snd_soc_8_8_write, .read = snd_soc_8_8_read,
.i2c_read = snd_soc_8_8_read_i2c,
+ .spi_write = snd_soc_8_8_spi_write,
},
{
.addr_bits = 8, .data_bits = 16,
.write = snd_soc_8_16_write, .read = snd_soc_8_16_read,
.i2c_read = snd_soc_8_16_read_i2c,
+ .spi_write = snd_soc_8_16_spi_write,
},
{
.addr_bits = 16, .data_bits = 8,
@@ -556,6 +651,7 @@ static struct {
.addr_bits = 16, .data_bits = 16,
.write = snd_soc_16_16_write, .read = snd_soc_16_16_read,
.i2c_read = snd_soc_16_16_read_i2c,
+ .spi_write = snd_soc_16_16_spi_write,
},
};
--
1.7.3.1
next reply other threads:[~2010-10-04 10:25 UTC|newest]
Thread overview: 3+ messages / expand[flat|nested] mbox.gz Atom feed top
2010-10-04 10:25 Dimitris Papastamos [this message]
2010-10-05 16:49 ` [PATCH] ASoC: soc-cache: Add spi_write support for all I/O types Liam Girdwood
2010-10-05 16:58 ` Mark Brown
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1286187913-6600-1-git-send-email-dp@opensource.wolfsonmicro.com \
--to=dp@opensource.wolfsonmicro.com \
--cc=alsa-devel@alsa-project.org \
--cc=broonie@opensource.wolfsonmicro.com \
--cc=lrg@slimlogic.co.uk \
--cc=patches@opensource.wolfsonmicro.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).