From: Jarkko Nikula <jhnikula@gmail.com>
To: alsa-devel@alsa-project.org
Cc: Mark Brown <broonie@opensource.wolfsonmicro.com>,
Liam Girdwood <lrg@slimlogic.co.uk>
Subject: [PATCH 2/2] ASoC: tlv320aic3x: Add support to shared common reset line
Date: Mon, 1 Nov 2010 14:03:56 +0200 [thread overview]
Message-ID: <1288613036-13169-2-git-send-email-jhnikula@gmail.com> (raw)
In-Reply-To: <1288613036-13169-1-git-send-email-jhnikula@gmail.com>
This is aimed to configurations where multiple aic3x codecs share the same
reset line and are powered from same supply voltages.
Currently aic3x_probe will fail if trying to request already requested
gpio_reset and passing -1 to another aic3x instances cause that those
instances cannot release reset in aic3x_set_power. That is, another
instances can work only if primary aic3x instance is powered and reset is
released.
Solve this by implementing a list of probed instances that is used for
checking if other instance shares the same gpio_reset number. If a shared
reset line exists, then only first instance tries to request and configure
it and the last instance releases it.
Runtime modifications are not needed since aic3x_regulator_event with help
of regulator framework takes already care that reset is pulled down only
when some or all supplies are disabled meaning that all instances using them
are idle.
Signed-off-by: Jarkko Nikula <jhnikula@gmail.com>
---
sound/soc/codecs/tlv320aic3x.c | 28 +++++++++++++++++++++++++---
1 files changed, 25 insertions(+), 3 deletions(-)
diff --git a/sound/soc/codecs/tlv320aic3x.c b/sound/soc/codecs/tlv320aic3x.c
index 157b534..684ca3a 100644
--- a/sound/soc/codecs/tlv320aic3x.c
+++ b/sound/soc/codecs/tlv320aic3x.c
@@ -61,6 +61,8 @@ static const char *aic3x_supply_names[AIC3X_NUM_SUPPLIES] = {
"DRVDD", /* ADC Analog and Output Driver Voltage */
};
+static LIST_HEAD(reset_list);
+
struct aic3x_priv;
struct aic3x_disable_nb {
@@ -77,6 +79,7 @@ struct aic3x_priv {
struct aic3x_setup_data *setup;
void *control_data;
unsigned int sysclk;
+ struct list_head list;
int master;
int gpio_reset;
int power;
@@ -1344,11 +1347,25 @@ static int aic3x_init(struct snd_soc_codec *codec)
return 0;
}
+static bool aic3x_is_shared_reset(struct aic3x_priv *aic3x)
+{
+ struct aic3x_priv *a;
+
+ list_for_each_entry(a, &reset_list, list) {
+ if (gpio_is_valid(aic3x->gpio_reset) &&
+ aic3x->gpio_reset == a->gpio_reset)
+ return true;
+ }
+
+ return false;
+}
+
static int aic3x_probe(struct snd_soc_codec *codec)
{
struct aic3x_priv *aic3x = snd_soc_codec_get_drvdata(codec);
int ret, i;
+ INIT_LIST_HEAD(&aic3x->list);
codec->control_data = aic3x->control_data;
aic3x->codec = codec;
codec->idle_bias_off = 1;
@@ -1359,7 +1376,8 @@ static int aic3x_probe(struct snd_soc_codec *codec)
return ret;
}
- if (gpio_is_valid(aic3x->gpio_reset)) {
+ if (gpio_is_valid(aic3x->gpio_reset) &&
+ !aic3x_is_shared_reset(aic3x)) {
ret = gpio_request(aic3x->gpio_reset, "tlv320aic3x reset");
if (ret != 0)
goto err_gpio;
@@ -1405,6 +1423,7 @@ static int aic3x_probe(struct snd_soc_codec *codec)
snd_soc_add_controls(codec, &aic3x_classd_amp_gain_ctrl, 1);
aic3x_add_widgets(codec);
+ list_add(&aic3x->list, &reset_list);
return 0;
@@ -1414,7 +1433,8 @@ err_notif:
&aic3x->disable_nb[i].nb);
regulator_bulk_free(ARRAY_SIZE(aic3x->supplies), aic3x->supplies);
err_get:
- if (gpio_is_valid(aic3x->gpio_reset))
+ if (gpio_is_valid(aic3x->gpio_reset) &&
+ !aic3x_is_shared_reset(aic3x))
gpio_free(aic3x->gpio_reset);
err_gpio:
kfree(aic3x);
@@ -1427,7 +1447,9 @@ static int aic3x_remove(struct snd_soc_codec *codec)
int i;
aic3x_set_bias_level(codec, SND_SOC_BIAS_OFF);
- if (gpio_is_valid(aic3x->gpio_reset)) {
+ list_del(&aic3x->list);
+ if (gpio_is_valid(aic3x->gpio_reset) &&
+ !aic3x_is_shared_reset(aic3x)) {
gpio_set_value(aic3x->gpio_reset, 0);
gpio_free(aic3x->gpio_reset);
}
--
1.7.2.3
next prev parent reply other threads:[~2010-11-01 12:04 UTC|newest]
Thread overview: 5+ messages / expand[flat|nested] mbox.gz Atom feed top
2010-11-01 12:03 [PATCH 1/2] ASoC: tlv320aic3x: Use gpio_is_valid in checking for valid gpio_reset Jarkko Nikula
2010-11-01 12:03 ` Jarkko Nikula [this message]
2010-11-01 13:08 ` [PATCH 2/2] ASoC: tlv320aic3x: Add support to shared common reset line Mark Brown
2010-11-01 13:07 ` [PATCH 1/2] ASoC: tlv320aic3x: Use gpio_is_valid in checking for valid gpio_reset Mark Brown
2010-11-03 14:21 ` Liam Girdwood
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1288613036-13169-2-git-send-email-jhnikula@gmail.com \
--to=jhnikula@gmail.com \
--cc=alsa-devel@alsa-project.org \
--cc=broonie@opensource.wolfsonmicro.com \
--cc=lrg@slimlogic.co.uk \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).