From: Mark Brown <broonie@opensource.wolfsonmicro.com>
To: Liam Girdwood <lrg@slimlogic.co.uk>
Cc: alsa-devel@alsa-project.org,
Mark Brown <broonie@opensource.wolfsonmicro.com>
Subject: [PATCH] ASoC: Factor out boiler plate for DAPM event generation
Date: Wed, 10 Nov 2010 16:32:19 +0000 [thread overview]
Message-ID: <1289406739-19608-1-git-send-email-broonie@opensource.wolfsonmicro.com> (raw)
Make the DAPM sequence execution look a bit nicer by factoring out the
code to invoke an event into a single function since it's all the same
pretty much.
Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
---
sound/soc/soc-dapm.c | 98 +++++++++++++++++++++++++-------------------------
1 files changed, 49 insertions(+), 49 deletions(-)
diff --git a/sound/soc/soc-dapm.c b/sound/soc/soc-dapm.c
index 450307c..5a5db3f 100644
--- a/sound/soc/soc-dapm.c
+++ b/sound/soc/soc-dapm.c
@@ -726,13 +726,55 @@ static void dapm_seq_insert(struct snd_soc_dapm_widget *new_widget,
list_add_tail(&new_widget->power_list, list);
}
+static void dapm_seq_check_event(struct snd_soc_dapm_context *dapm,
+ struct snd_soc_dapm_widget *w, int event)
+{
+ struct snd_soc_card *card = dapm->card;
+ const char *ev_name;
+ int power, ret;
+
+ switch (event) {
+ case SND_SOC_DAPM_PRE_PMU:
+ ev_name = "PRE_PMU";
+ power = 1;
+ break;
+ case SND_SOC_DAPM_POST_PMU:
+ ev_name = "POST_PMU";
+ power = 1;
+ break;
+ case SND_SOC_DAPM_PRE_PMD:
+ ev_name = "PRE_PMD";
+ power = 0;
+ break;
+ case SND_SOC_DAPM_POST_PMD:
+ ev_name = "POST_PMD";
+ power = 0;
+ break;
+ default:
+ BUG();
+ return;
+ }
+
+ if (w->power != power)
+ return;
+
+ if (w->event && (w->event_flags & event)) {
+ pop_dbg(dapm->dev, card->pop_time, "pop test : %s %s\n",
+ w->name, ev_name);
+ ret = w->event(w, NULL, event);
+ if (ret < 0)
+ pr_err("%s: %s event failed: %d\n",
+ ev_name, w->name, ret);
+ }
+}
+
/* Apply the coalesced changes from a DAPM sequence */
static void dapm_seq_run_coalesced(struct snd_soc_dapm_context *dapm,
struct list_head *pending)
{
- struct snd_soc_dapm_widget *w;
struct snd_soc_card *card = dapm->card;
- int reg, power, ret;
+ struct snd_soc_dapm_widget *w;
+ int reg, power;
unsigned int value = 0;
unsigned int mask = 0;
unsigned int cur_mask;
@@ -757,29 +799,9 @@ static void dapm_seq_run_coalesced(struct snd_soc_dapm_context *dapm,
"pop test : Queue %s: reg=0x%x, 0x%x/0x%x\n",
w->name, reg, value, mask);
- /* power up pre event */
- if (w->power && w->event &&
- (w->event_flags & SND_SOC_DAPM_PRE_PMU)) {
- pop_dbg(dapm->dev, card->pop_time,
- "pop test : %s PRE_PMU\n", w->name);
- ret = w->event(w, NULL, SND_SOC_DAPM_PRE_PMU);
- if (ret < 0)
- dev_err(dapm->dev,
- "%s: pre event failed: %d\n",
- w->name, ret);
- }
-
- /* power down pre event */
- if (!w->power && w->event &&
- (w->event_flags & SND_SOC_DAPM_PRE_PMD)) {
- pop_dbg(dapm->dev, card->pop_time,
- "pop test : %s PRE_PMD\n", w->name);
- ret = w->event(w, NULL, SND_SOC_DAPM_PRE_PMD);
- if (ret < 0)
- dev_err(dapm->dev,
- "%s: pre event failed: %d\n",
- w->name, ret);
- }
+ /* Check for events */
+ dapm_seq_check_event(dapm, w, SND_SOC_DAPM_PRE_PMU);
+ dapm_seq_check_event(dapm, w, SND_SOC_DAPM_PRE_PMD);
}
if (reg >= 0) {
@@ -791,30 +813,8 @@ static void dapm_seq_run_coalesced(struct snd_soc_dapm_context *dapm,
}
list_for_each_entry(w, pending, power_list) {
- /* power up post event */
- if (w->power && w->event &&
- (w->event_flags & SND_SOC_DAPM_POST_PMU)) {
- pop_dbg(dapm->dev, card->pop_time,
- "pop test : %s POST_PMU\n", w->name);
- ret = w->event(w,
- NULL, SND_SOC_DAPM_POST_PMU);
- if (ret < 0)
- dev_err(dapm->dev,
- "%s: post event failed: %d\n",
- w->name, ret);
- }
-
- /* power down post event */
- if (!w->power && w->event &&
- (w->event_flags & SND_SOC_DAPM_POST_PMD)) {
- pop_dbg(dapm->dev, card->pop_time,
- "pop test : %s POST_PMD\n", w->name);
- ret = w->event(w, NULL, SND_SOC_DAPM_POST_PMD);
- if (ret < 0)
- dev_err(dapm->dev,
- "%s: post event failed: %d\n",
- w->name, ret);
- }
+ dapm_seq_check_event(dapm, w, SND_SOC_DAPM_POST_PMU);
+ dapm_seq_check_event(dapm, w, SND_SOC_DAPM_POST_PMD);
}
}
--
1.7.1
next reply other threads:[~2010-11-10 16:33 UTC|newest]
Thread overview: 2+ messages / expand[flat|nested] mbox.gz Atom feed top
2010-11-10 16:32 Mark Brown [this message]
2010-11-10 21:04 ` [PATCH] ASoC: Factor out boiler plate for DAPM event generation Liam Girdwood
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1289406739-19608-1-git-send-email-broonie@opensource.wolfsonmicro.com \
--to=broonie@opensource.wolfsonmicro.com \
--cc=alsa-devel@alsa-project.org \
--cc=lrg@slimlogic.co.uk \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).