From mboxrd@z Thu Jan 1 00:00:00 1970 From: Vasily Khoruzhick Subject: [PATCH] ASoC: RX1950: Fix hw_params function Date: Sat, 13 Nov 2010 14:53:41 +0200 Message-ID: <1289652821-5435-1-git-send-email-anarsoul@gmail.com> Mime-Version: 1.0 Content-Type: text/plain; charset="us-ascii" Content-Transfer-Encoding: 7bit Return-path: Received: from mail-ew0-f51.google.com (mail-ew0-f51.google.com [209.85.215.51]) by alsa0.perex.cz (Postfix) with ESMTP id 98FEB2443E for ; Sat, 13 Nov 2010 13:54:35 +0100 (CET) Received: by ewy2 with SMTP id 2so340211ewy.38 for ; Sat, 13 Nov 2010 04:54:35 -0800 (PST) List-Unsubscribe: , List-Archive: List-Post: List-Help: List-Subscribe: , Sender: alsa-devel-bounces@alsa-project.org Errors-To: alsa-devel-bounces@alsa-project.org To: Mark Brown , alsa-devel , Liam Girdwood Cc: Vasily Khoruzhick List-Id: alsa-devel@alsa-project.org Unfortunatelly, I misunderstood datasheet, and on s3c244x-iis when MPLLin source for master clock is selected, prescaler has no effect. Remove dividor calculation for 44100 rate; remove 88200 rate at all, rx1950 can't do it. Signed-off-by: Vasily Khoruzhick --- sound/soc/s3c24xx/rx1950_uda1380.c | 20 +++----------------- 1 files changed, 3 insertions(+), 17 deletions(-) diff --git a/sound/soc/s3c24xx/rx1950_uda1380.c b/sound/soc/s3c24xx/rx1950_uda1380.c index ffd5cf2..468cc11 100644 --- a/sound/soc/s3c24xx/rx1950_uda1380.c +++ b/sound/soc/s3c24xx/rx1950_uda1380.c @@ -50,7 +50,6 @@ static unsigned int rates[] = { 16000, 44100, 48000, - 88200, }; static struct snd_pcm_hw_constraint_list hw_rates = { @@ -130,7 +129,6 @@ static const struct snd_soc_dapm_route audio_map[] = { }; static struct platform_device *s3c24xx_snd_device; -static struct clk *xtal; static int rx1950_startup(struct snd_pcm_substream *substream) { @@ -179,10 +177,8 @@ static int rx1950_hw_params(struct snd_pcm_substream *substream, case 44100: case 88200: clk_source = S3C24XX_CLKSRC_MPLL; - fs_mode = S3C2410_IISMOD_256FS; - div = clk_get_rate(xtal) / (256 * rate); - if (clk_get_rate(xtal) % (256 * rate) > (128 * rate)) - div++; + fs_mode = S3C2410_IISMOD_384FS; + div = 1; break; default: printk(KERN_ERR "%s: rate %d is not supported\n", @@ -210,7 +206,7 @@ static int rx1950_hw_params(struct snd_pcm_substream *substream, /* set MCLK division for sample rate */ ret = snd_soc_dai_set_clkdiv(cpu_dai, S3C24XX_DIV_MCLK, - S3C2410_IISMOD_384FS); + fs_mode); if (ret < 0) return ret; @@ -295,17 +291,8 @@ static int __init rx1950_init(void) goto err_plat_add; } - xtal = clk_get(&s3c24xx_snd_device->dev, "xtal"); - - if (IS_ERR(xtal)) { - ret = PTR_ERR(xtal); - platform_device_unregister(s3c24xx_snd_device); - goto err_clk; - } - return 0; -err_clk: err_plat_add: err_plat_alloc: err_gpio_conf: @@ -320,7 +307,6 @@ static void __exit rx1950_exit(void) platform_device_unregister(s3c24xx_snd_device); snd_soc_jack_free_gpios(&hp_jack, ARRAY_SIZE(hp_jack_gpios), hp_jack_gpios); - clk_put(xtal); gpio_free(S3C2410_GPA(1)); } -- 1.7.3.2