From: Alexander Sverdlin <subaparts@yandex.ru>
To: alsa-devel@alsa-project.org, Liam Girdwood <lrg@slimlogic.co.uk>,
Mark Brown <broonie@opensource.wolfsonmicro.com>,
Dimitris Papastamos <dp@opensource.wolfsonmicro.com>
Cc: H Hartley Sweeten <hsweeten@visionengravers.com>,
George Kashperko <george@chas.com.ua>,
Lennert Buytenhek <buytenh@wantstofly.org>
Subject: [PATCH] EDB93xx: Add support for CS4271 CODEC on EDB93xx boards
Date: Sun, 23 Jan 2011 03:51:24 +0300 [thread overview]
Message-ID: <1295743884.14515.35.camel@r60e> (raw)
From: Alexander Sverdlin <subaparts@yandex.ru>
Add support for CS4271 SPI-connected CODEC on EDB93xx boards.
Signed-off-by: Alexander Sverdlin <subaparts@yandex.ru>
---
arch/arm/mach-ep93xx/edb93xx.c | 54 ++++++++++++++++++++++++++++++++++++++++
1 files changed, 54 insertions(+), 0 deletions(-)
diff --git a/arch/arm/mach-ep93xx/edb93xx.c b/arch/arm/mach-ep93xx/edb93xx.c
index 4b04316..9f9193d 100644
--- a/arch/arm/mach-ep93xx/edb93xx.c
+++ b/arch/arm/mach-ep93xx/edb93xx.c
@@ -30,12 +30,21 @@
#include <linux/gpio.h>
#include <linux/i2c.h>
#include <linux/i2c-gpio.h>
+#include <linux/spi/spi.h>
+#include <mach/ep93xx_spi.h>
#include <mach/hardware.h>
#include <asm/mach-types.h>
#include <asm/mach/arch.h>
+#include <sound/cs4271.h>
+
+#define edb93xx_has_audio() (machine_is_edb9301() || \
+ machine_is_edb9302() || \
+ machine_is_edb9302a() || \
+ machine_is_edb9307a() || \
+ machine_is_edb9315a())
static void __init edb93xx_register_flash(void)
{
@@ -93,6 +102,49 @@ static void __init edb93xx_register_i2c(void)
/*************************************************************************
+ * EDB93xx SPI peripheral handling
+ *************************************************************************/
+static struct cs4271_platform_data cs4271_edb93xx_gpio = {
+ .gpio_nreset = EP93XX_GPIO_LINE_EGPIO1,
+ .gpio_disable = EP93XX_GPIO_LINE_EGPIO6,
+};
+
+static struct spi_board_info edb93xx_spi_board_info[] = {
+ {
+ .modalias = "cs4271",
+ .max_speed_hz = 6000000,
+ .bus_num = 0,
+ .chip_select = 0,
+ .mode = SPI_MODE_3,
+ .platform_data = &cs4271_edb93xx_gpio,
+ },
+};
+
+static struct ep93xx_spi_info edb93xx_spi_info = {
+ .num_chipselect = ARRAY_SIZE(edb93xx_spi_board_info),
+};
+
+static void __init edb93xx_register_spi(void)
+{
+ if (edb93xx_has_audio()) {
+ ep93xx_register_spi(&edb93xx_spi_info,
+ edb93xx_spi_board_info,
+ ARRAY_SIZE(edb93xx_spi_board_info));
+ }
+}
+
+/*************************************************************************
+ * EDB93xx I2S
+ *************************************************************************/
+static void __init edb93xx_register_i2s(void)
+{
+ if (edb93xx_has_audio()) {
+ ep93xx_register_i2s();
+ }
+}
+
+
+/*************************************************************************
* EDB93xx pwm
*************************************************************************/
static void __init edb93xx_register_pwm(void)
@@ -117,6 +169,8 @@ static void __init edb93xx_init_machine(void)
edb93xx_register_flash();
ep93xx_register_eth(&edb93xx_eth_data, 1);
edb93xx_register_i2c();
+ edb93xx_register_spi();
+ edb93xx_register_i2s();
edb93xx_register_pwm();
}
next reply other threads:[~2011-01-23 0:51 UTC|newest]
Thread overview: 21+ messages / expand[flat|nested] mbox.gz Atom feed top
2011-01-23 0:51 Alexander Sverdlin [this message]
2011-01-24 16:30 ` [PATCH] EDB93xx: Add support for CS4271 CODEC on EDB93xx boards H Hartley Sweeten
2011-01-25 11:46 ` Mark Brown
2011-01-25 12:08 ` Alexander Sverdlin
-- strict thread matches above, loose matches on Subject: below --
2011-02-01 23:40 Alexander Sverdlin
2011-02-02 0:02 ` H Hartley Sweeten
2011-02-02 10:48 ` Alexander Sverdlin
2011-02-02 10:49 ` Mark Brown
2011-02-02 11:12 ` Alexander Sverdlin
2011-02-02 12:53 ` Mark Brown
2011-02-02 13:26 ` Alexander Sverdlin
2011-02-02 16:53 ` H Hartley Sweeten
2011-02-02 17:00 ` Mark Brown
2011-02-02 17:21 ` H Hartley Sweeten
2011-02-02 17:33 ` Alexander Sverdlin
2011-02-02 17:48 ` H Hartley Sweeten
2011-02-02 18:31 ` Mark Brown
2011-02-02 18:18 ` H Hartley Sweeten
2011-02-02 16:45 ` H Hartley Sweeten
2011-02-02 7:54 ` Mika Westerberg
2011-02-02 10:51 ` Mark Brown
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1295743884.14515.35.camel@r60e \
--to=subaparts@yandex.ru \
--cc=alsa-devel@alsa-project.org \
--cc=broonie@opensource.wolfsonmicro.com \
--cc=buytenh@wantstofly.org \
--cc=dp@opensource.wolfsonmicro.com \
--cc=george@chas.com.ua \
--cc=hsweeten@visionengravers.com \
--cc=lrg@slimlogic.co.uk \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).