From: Alexander Sverdlin <subaparts@yandex.ru>
To: linux-arm-kernel@lists.infradead.org,
alsa-devel@alsa-project.org, Liam Girdwood <lrg@slimlogic.co.uk>,
Mark Brown <broonie@opensource.wolfsonmicro.com>,
Dimitris Papastamos <dp@opens>
Cc: H Hartley Sweeten <hsweeten@visionengravers.com>,
Lennert Buytenhek <buytenh@wantstofly.org>
Subject: [PATCH] EDB93xx: Add support for CS4271 CODEC on EDB93xx boards
Date: Wed, 02 Feb 2011 02:40:53 +0300 [thread overview]
Message-ID: <1296603653.1504.9.camel@r60e> (raw)
From: Alexander Sverdlin <subaparts@yandex.ru>
Add support for CS4271 SPI-connected CODEC on EDB93xx boards.
Major rework based on code provided by H Hartley Sweeten <hsweeten@visionengravers.com>.
Tested on EDB9302, others (EDB9301, EDB9302A, EDB9307A, EDB0315A) should work.
Signed-off-by: Alexander Sverdlin <subaparts@yandex.ru>
---
arch/arm/mach-ep93xx/edb93xx.c | 117 ++++++++++++++++++++++++++++++++++++++++
1 files changed, 117 insertions(+), 0 deletions(-)
diff --git a/arch/arm/mach-ep93xx/edb93xx.c b/arch/arm/mach-ep93xx/edb93xx.c
index 4b04316..f20be96 100644
--- a/arch/arm/mach-ep93xx/edb93xx.c
+++ b/arch/arm/mach-ep93xx/edb93xx.c
@@ -30,12 +30,22 @@
#include <linux/gpio.h>
#include <linux/i2c.h>
#include <linux/i2c-gpio.h>
+#include <linux/spi/spi.h>
+#include <linux/delay.h>
+#include <mach/ep93xx_spi.h>
#include <mach/hardware.h>
#include <asm/mach-types.h>
#include <asm/mach/arch.h>
+#include <sound/cs4271.h>
+
+#define edb93xx_has_audio() (machine_is_edb9301() || \
+ machine_is_edb9302() || \
+ machine_is_edb9302a() || \
+ machine_is_edb9307a() || \
+ machine_is_edb9315a())
static void __init edb93xx_register_flash(void)
{
@@ -93,6 +103,111 @@ static void __init edb93xx_register_i2c(void)
/*************************************************************************
+ * EDB93xx SPI peripheral handling
+ *************************************************************************/
+static int edb93xx_cs4271_hw_setup(struct spi_device *spi)
+{
+ int gpio_nreset;
+ int err;
+
+ if (machine_is_edb9301() || machine_is_edb9302()) {
+ gpio_nreset = EP93XX_GPIO_LINE_EGPIO1;
+ } else if (machine_is_edb9302a() || machine_is_edb9307a()) {
+ ep93xx_devcfg_set_bits(EP93XX_SYSCON_DEVCFG_HONIDE);
+ gpio_nreset = EP93XX_GPIO_LINE_DD2;
+ } else if (machine_is_edb9315a()) {
+ gpio_nreset = EP93XX_GPIO_LINE_EGPIO14;
+ } else {
+ return -EINVAL;
+ }
+
+ err = gpio_request(gpio_nreset, spi->modalias);
+ if (err)
+ return err;
+ err = gpio_request(EP93XX_GPIO_LINE_EGPIO6, spi->modalias);
+ if (err)
+ return err;
+
+ gpio_direction_output(EP93XX_GPIO_LINE_EGPIO6, 1);
+
+ /* Reset codec */
+ gpio_direction_output(gpio_nreset, 0);
+ udelay(1);
+ gpio_set_value(gpio_nreset, 1);
+ /* Give the codec time to wake up */
+ udelay(1);
+
+ return 0;
+}
+
+static void edb93xx_cs4271_hw_cleanup(struct spi_device *spi)
+{
+ int gpio_nreset;
+
+ if (machine_is_edb9301() || machine_is_edb9302())
+ gpio_nreset = EP93XX_GPIO_LINE_EGPIO1;
+ else if (machine_is_edb9302a() || machine_is_edb9307a())
+ gpio_nreset = EP93XX_GPIO_LINE_DD2;
+ else if (machine_is_edb9315a())
+ gpio_nreset = EP93XX_GPIO_LINE_EGPIO14;
+ else
+ return;
+
+ gpio_set_value(gpio_nreset, 0);
+ gpio_free(gpio_nreset);
+
+ gpio_set_value(EP93XX_GPIO_LINE_EGPIO6, 1);
+ gpio_free(EP93XX_GPIO_LINE_EGPIO6);
+}
+
+static void edb93xx_cs4271_hw_cs_control(struct spi_device *spi, int value)
+{
+ gpio_set_value(EP93XX_GPIO_LINE_EGPIO6, value);
+}
+
+static struct ep93xx_spi_chip_ops edb93xx_cs4271_hw = {
+ .setup = edb93xx_cs4271_hw_setup,
+ .cleanup = edb93xx_cs4271_hw_cleanup,
+ .cs_control = edb93xx_cs4271_hw_cs_control,
+};
+
+static struct spi_board_info edb93xx_spi_board_info[] __initdata = {
+ {
+ .modalias = "cs4271",
+ .controller_data = &edb93xx_cs4271_hw,
+ .max_speed_hz = 6000000,
+ .bus_num = 0,
+ .chip_select = 0,
+ .mode = SPI_MODE_3,
+ },
+};
+
+static struct ep93xx_spi_info edb93xx_spi_info = {
+ .num_chipselect = ARRAY_SIZE(edb93xx_spi_board_info),
+};
+
+static void __init edb93xx_register_spi(void)
+{
+ if (edb93xx_has_audio()) {
+ ep93xx_register_spi(&edb93xx_spi_info,
+ edb93xx_spi_board_info,
+ ARRAY_SIZE(edb93xx_spi_board_info));
+ }
+}
+
+
+/*************************************************************************
+ * EDB93xx I2S
+ *************************************************************************/
+static void __init edb93xx_register_i2s(void)
+{
+ if (edb93xx_has_audio()) {
+ ep93xx_register_i2s();
+ }
+}
+
+
+/*************************************************************************
* EDB93xx pwm
*************************************************************************/
static void __init edb93xx_register_pwm(void)
@@ -117,6 +232,8 @@ static void __init edb93xx_init_machine(void)
edb93xx_register_flash();
ep93xx_register_eth(&edb93xx_eth_data, 1);
edb93xx_register_i2c();
+ edb93xx_register_spi();
+ edb93xx_register_i2s();
edb93xx_register_pwm();
}
next reply other threads:[~2011-02-01 23:40 UTC|newest]
Thread overview: 22+ messages / expand[flat|nested] mbox.gz Atom feed top
2011-02-01 23:40 Alexander Sverdlin [this message]
2011-02-02 0:02 ` [PATCH] EDB93xx: Add support for CS4271 CODEC on EDB93xx boards H Hartley Sweeten
2011-02-02 10:48 ` Alexander Sverdlin
2011-02-02 10:49 ` Mark Brown
2011-02-02 11:12 ` Alexander Sverdlin
2011-02-02 12:53 ` Mark Brown
2011-02-02 13:26 ` Alexander Sverdlin
2011-02-02 16:53 ` H Hartley Sweeten
2011-02-02 17:00 ` Mark Brown
2011-02-02 17:21 ` H Hartley Sweeten
2011-02-02 17:33 ` Alexander Sverdlin
2011-02-02 17:48 ` H Hartley Sweeten
2011-02-02 18:31 ` Mark Brown
2011-02-02 18:18 ` H Hartley Sweeten
2011-02-02 16:45 ` H Hartley Sweeten
2011-02-02 7:54 ` Mika Westerberg
2011-02-02 16:27 ` [alsa-devel] " H Hartley Sweeten
2011-02-02 10:51 ` Mark Brown
-- strict thread matches above, loose matches on Subject: below --
2011-01-23 0:51 Alexander Sverdlin
2011-01-24 16:30 ` H Hartley Sweeten
2011-01-25 11:46 ` Mark Brown
2011-01-25 12:08 ` Alexander Sverdlin
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1296603653.1504.9.camel@r60e \
--to=subaparts@yandex.ru \
--cc=alsa-devel@alsa-project.org \
--cc=broonie@opensource.wolfsonmicro.com \
--cc=buytenh@wantstofly.org \
--cc=dp@opens \
--cc=hsweeten@visionengravers.com \
--cc=linux-arm-kernel@lists.infradead.org \
--cc=lrg@slimlogic.co.uk \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).