From: Dimitris Papastamos <dp@opensource.wolfsonmicro.com>
To: Mark Brown <broonie@opensource.wolfsonmicro.com>,
Liam Girdwood <lrg@slimlogic.co.uk>
Cc: alsa-devel@alsa-project.org, patches@opensource.wolfsonmicro.com
Subject: [PATCH] ASoC: soc-core: Support debugfs entries larger than PAGE_SIZE bytes
Date: Wed, 2 Feb 2011 11:29:05 +0000 [thread overview]
Message-ID: <1296646145-2356-1-git-send-email-dp@opensource.wolfsonmicro.com> (raw)
For some codecs with large register maps, it was not possible to dump
all registers via the codec_reg file but only up to PAGE_SIZE bytes.
This patch fixes this problem.
Signed-off-by: Dimitris Papastamos <dp@opensource.wolfsonmicro.com>
---
sound/soc/soc-core.c | 114 +++++++++++++++++++++++++++++++++----------------
1 files changed, 77 insertions(+), 37 deletions(-)
diff --git a/sound/soc/soc-core.c b/sound/soc/soc-core.c
index 205cbd7..a7710d2 100644
--- a/sound/soc/soc-core.c
+++ b/sound/soc/soc-core.c
@@ -87,15 +87,55 @@ static int min_bytes_needed(unsigned long val)
return c;
}
+/* fill buf which is 'len' bytes with a formatted
+ * string of the form 'reg: value\n' */
+static int format_register_str(struct snd_soc_codec *codec,
+ unsigned int regidx, char *buf, size_t len)
+{
+ int wordsize = codec->driver->reg_word_size * 2;
+ int regsize = min_bytes_needed(codec->driver->reg_cache_size) * 2;
+ int ret;
+ char tmpbuf[len + 1];
+
+ /* since tmpbuf is allocated on the stack, warn the callers if they
+ * try to abuse this function */
+ WARN_ON(len > 63);
+
+ /* +2 for ': ' and + 1 for '\n' */
+ if (wordsize + regsize + 2 + 1 != len)
+ return -EINVAL;
+
+ /* we don't currently handle failed reads */
+ ret = snd_soc_read(codec , regidx);
+ if (ret < 0) {
+ dev_err(codec->dev, "Failed to read from %#x\n", regidx);
+ return ret;
+ }
+
+ /* prepare the buffer */
+ snprintf(tmpbuf, len + 1, "%.*x: %.*x\n", wordsize,
+ regidx, regsize, ret);
+ /* copy it back to the caller without the '\0' */
+ memcpy(buf, tmpbuf, len);
+
+ return 0;
+}
+
/* codec register dump */
-static ssize_t soc_codec_reg_show(struct snd_soc_codec *codec, char *buf)
+static ssize_t soc_codec_reg_show(struct snd_soc_codec *codec, char *buf,
+ size_t count, loff_t pos)
{
- int ret, i, step = 1, count = 0;
+ int i, step = 1;
int wordsize, regsize;
+ int len;
+ size_t total = 0;
+ loff_t p = 0;
wordsize = codec->driver->reg_word_size * 2;
regsize = min_bytes_needed(codec->driver->reg_cache_size) * 2;
+ len = wordsize + regsize + 2 + 1;
+
if (!codec->driver->reg_cache_size)
return 0;
@@ -105,51 +145,34 @@ static ssize_t soc_codec_reg_show(struct snd_soc_codec *codec, char *buf)
for (i = 0; i < codec->driver->reg_cache_size; i += step) {
if (codec->readable_register && !codec->readable_register(codec, i))
continue;
-
- count += sprintf(buf + count, "%.*x: ", regsize, i);
- if (count >= PAGE_SIZE - 1)
- break;
-
if (codec->driver->display_register) {
count += codec->driver->display_register(codec, buf + count,
PAGE_SIZE - count, i);
} else {
- /* If the read fails it's almost certainly due to
- * the register being volatile and the device being
- * powered off.
- */
- ret = snd_soc_read(codec, i);
- if (ret >= 0)
- count += snprintf(buf + count,
- PAGE_SIZE - count,
- "%.*x", wordsize, ret);
- else
- count += snprintf(buf + count,
- PAGE_SIZE - count,
- "<no data: %d>", ret);
+ /* only support larger than PAGE_SIZE bytes debugfs
+ * entries for the default case */
+ if (p >= pos) {
+ if (total + len >= count - 1)
+ break;
+ format_register_str(codec, i, buf + total, len);
+ total += len;
+ }
+ p += len;
}
-
- if (count >= PAGE_SIZE - 1)
- break;
-
- count += snprintf(buf + count, PAGE_SIZE - count, "\n");
- if (count >= PAGE_SIZE - 1)
- break;
}
- /* Truncate count; min() would cause a warning */
- if (count >= PAGE_SIZE)
- count = PAGE_SIZE - 1;
+ total = min(total, count - 1);
- return count;
+ return total;
}
+
static ssize_t codec_reg_show(struct device *dev,
struct device_attribute *attr, char *buf)
{
struct snd_soc_pcm_runtime *rtd =
container_of(dev, struct snd_soc_pcm_runtime, dev);
- return soc_codec_reg_show(rtd->codec, buf);
+ return soc_codec_reg_show(rtd->codec, buf, PAGE_SIZE, 0);
}
static DEVICE_ATTR(codec_reg, 0444, codec_reg_show, NULL);
@@ -188,16 +211,33 @@ static int codec_reg_open_file(struct inode *inode, struct file *file)
}
static ssize_t codec_reg_read_file(struct file *file, char __user *user_buf,
- size_t count, loff_t *ppos)
+ size_t count, loff_t *ppos)
{
ssize_t ret;
struct snd_soc_codec *codec = file->private_data;
- char *buf = kmalloc(PAGE_SIZE, GFP_KERNEL);
+ char *buf;
+
+ if (*ppos < 0 || !count)
+ return -EINVAL;
+
+ buf = kmalloc(count, GFP_KERNEL);
if (!buf)
return -ENOMEM;
- ret = soc_codec_reg_show(codec, buf);
- if (ret >= 0)
- ret = simple_read_from_buffer(user_buf, count, ppos, buf, ret);
+
+ ret = soc_codec_reg_show(codec, buf, count, *ppos);
+ if (ret >= 0) {
+ if (!access_ok(VERIFY_WRITE, user_buf, ret)) {
+ ret = -EFAULT;
+ goto out;
+ }
+ if (copy_to_user(user_buf, buf, ret)) {
+ ret = -EFAULT;
+ goto out;
+ }
+ *ppos += ret;
+ }
+
+out:
kfree(buf);
return ret;
}
--
1.7.3.5
next reply other threads:[~2011-02-02 11:29 UTC|newest]
Thread overview: 7+ messages / expand[flat|nested] mbox.gz Atom feed top
2011-02-02 11:29 Dimitris Papastamos [this message]
2011-02-02 13:07 ` [PATCH] ASoC: soc-core: Support debugfs entries larger than PAGE_SIZE bytes Mark Brown
2011-02-02 13:28 ` Dimitris Papastamos
2011-02-02 13:37 ` Mark Brown
-- strict thread matches above, loose matches on Subject: below --
2011-02-02 13:58 Dimitris Papastamos
2011-02-02 20:47 ` Liam Girdwood
2011-02-02 20:48 ` Mark Brown
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1296646145-2356-1-git-send-email-dp@opensource.wolfsonmicro.com \
--to=dp@opensource.wolfsonmicro.com \
--cc=alsa-devel@alsa-project.org \
--cc=broonie@opensource.wolfsonmicro.com \
--cc=lrg@slimlogic.co.uk \
--cc=patches@opensource.wolfsonmicro.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).