From: linux@audioscience.com
To: patch@alsa-project.org
Cc: tiwai@suse.de,
Eliot Blennerhassett <eblennerhassett@audioscience.com>,
alsa-devel@alsa-project.org
Subject: [PATCH 23/28] New functions prep for interrupt driven streams.
Date: Thu, 10 Feb 2011 17:26:16 +1300 [thread overview]
Message-ID: <1297311981-30448-24-git-send-email-linux@audioscience.com> (raw)
In-Reply-To: <1297311981-30448-1-git-send-email-linux@audioscience.com>
From: Eliot Blennerhassett <eblennerhassett@audioscience.com>
Signed-off-by: Eliot Blennerhassett <eblennerhassett@audioscience.com>
---
pci/asihpi/hpi.h | 19 ++++++++++++++++++-
pci/asihpi/hpi_internal.h | 25 +++++++++++++++++++++----
2 files changed, 39 insertions(+), 5 deletions(-)
diff --git a/pci/asihpi/hpi.h b/pci/asihpi/hpi.h
index 5ac978d..ec19df5 100644
--- a/pci/asihpi/hpi.h
+++ b/pci/asihpi/hpi.h
@@ -324,6 +324,15 @@ to enable SSX2 stream mapping within the kernel level of the driver.
*/
HPI_ADAPTER_PROPERTY_SSX2_SETTING = 4,
+/** Enables/disables PCI(e) IRQ.
+A setting of 0 indicates that no interrupts are being generated. A DSP boot
+this property is set to 0. Setting to a non-zero value specifies the number
+of frames of audio that should be processed between interrupts. This property
+should be set to multiple of the mixer interval as read back from the
+HPI_ADAPTER_PROPERTY_INTERVAL property.
+*/
+ HPI_ADAPTER_PROPERTY_IRQ_RATE = 5,
+
/** Base number for readonly properties */
HPI_ADAPTER_PROPERTY_READONLYBASE = 256,
@@ -428,7 +437,13 @@ return value is true (1) or false (0). If the current adapter
mode is MONO SSX2 is disabled, even though this property will
return true.
*/
- HPI_ADAPTER_PROPERTY_SUPPORTS_SSX2 = 271
+ HPI_ADAPTER_PROPERTY_SUPPORTS_SSX2 = 271,
+/** Readonly supports PCI(e) IRQ.
+Indicates that the adapter in it's current mode supports interrupts
+across the host bus. Note, this does not imply that interrupts are
+enabled. Instead it indicates that they can be enabled.
+*/
+ HPI_ADAPTER_PROPERTY_SUPPORTS_IRQ = 272
};
/** Adapter mode commands
@@ -998,6 +1013,8 @@ enum HPI_ERROR_CODES {
HPI_ERROR_NO_INTERADAPTER_GROUPS = 314,
/** Streams on different DSPs cannot be grouped. */
HPI_ERROR_NO_INTERDSP_GROUPS = 315,
+ /** Stream wait cancelled before threshold reached. */
+ HPI_ERROR_WAIT_CANCELLED = 316,
/** Invalid mixer node for this adapter. */
HPI_ERROR_INVALID_NODE = 400,
diff --git a/pci/asihpi/hpi_internal.h b/pci/asihpi/hpi_internal.h
index 06a8779..ca5b844 100644
--- a/pci/asihpi/hpi_internal.h
+++ b/pci/asihpi/hpi_internal.h
@@ -432,7 +432,9 @@ enum HPI_FUNCTION_IDS {
HPI_ADAPTER_ENUM_PROPERTY = HPI_FUNC_ID(ADAPTER, 16),
HPI_ADAPTER_MODULE_INFO = HPI_FUNC_ID(ADAPTER, 17),
HPI_ADAPTER_DEBUG_READ = HPI_FUNC_ID(ADAPTER, 18),
-#define HPI_ADAPTER_FUNCTION_COUNT 18
+ HPI_ADAPTER_IRQ_QUERY_AND_CLEAR = HPI_FUNC_ID(ADAPTER, 19),
+ HPI_ADAPTER_IRQ_CALLBACK = HPI_FUNC_ID(ADAPTER, 20),
+#define HPI_ADAPTER_FUNCTION_COUNT 20
HPI_OSTREAM_OPEN = HPI_FUNC_ID(OSTREAM, 1),
HPI_OSTREAM_CLOSE = HPI_FUNC_ID(OSTREAM, 2),
@@ -458,7 +460,8 @@ enum HPI_FUNCTION_IDS {
HPI_OSTREAM_GROUP_RESET = HPI_FUNC_ID(OSTREAM, 22),
HPI_OSTREAM_HOSTBUFFER_GET_INFO = HPI_FUNC_ID(OSTREAM, 23),
HPI_OSTREAM_WAIT_START = HPI_FUNC_ID(OSTREAM, 24),
-#define HPI_OSTREAM_FUNCTION_COUNT 24
+ HPI_OSTREAM_WAIT = HPI_FUNC_ID(OSTREAM, 25),
+#define HPI_OSTREAM_FUNCTION_COUNT 25
HPI_ISTREAM_OPEN = HPI_FUNC_ID(ISTREAM, 1),
HPI_ISTREAM_CLOSE = HPI_FUNC_ID(ISTREAM, 2),
@@ -479,7 +482,8 @@ enum HPI_FUNCTION_IDS {
HPI_ISTREAM_GROUP_RESET = HPI_FUNC_ID(ISTREAM, 17),
HPI_ISTREAM_HOSTBUFFER_GET_INFO = HPI_FUNC_ID(ISTREAM, 18),
HPI_ISTREAM_WAIT_START = HPI_FUNC_ID(ISTREAM, 19),
-#define HPI_ISTREAM_FUNCTION_COUNT 19
+ HPI_ISTREAM_WAIT = HPI_FUNC_ID(ISTREAM, 20),
+#define HPI_ISTREAM_FUNCTION_COUNT 20
/* NOTE:
GET_NODE_INFO, SET_CONNECTION, GET_CONNECTIONS are not currently used */
@@ -494,7 +498,8 @@ enum HPI_FUNCTION_IDS {
HPI_MIXER_GET_CONTROL_ARRAY_BY_INDEX = HPI_FUNC_ID(MIXER, 9),
HPI_MIXER_GET_CONTROL_MULTIPLE_VALUES = HPI_FUNC_ID(MIXER, 10),
HPI_MIXER_STORE = HPI_FUNC_ID(MIXER, 11),
-#define HPI_MIXER_FUNCTION_COUNT 11
+ HPI_MIXER_GET_CACHE_INFO = HPI_FUNC_ID(MIXER, 12),
+#define HPI_MIXER_FUNCTION_COUNT 12
HPI_CONTROL_GET_INFO = HPI_FUNC_ID(CONTROL, 1),
HPI_CONTROL_GET_STATE = HPI_FUNC_ID(CONTROL, 2),
@@ -693,6 +698,9 @@ union hpi_adapterx_msg {
u32 pad32;
u16 value;
} test_assert;
+ struct {
+ u32 yes;
+ } irq_query;
};
struct hpi_adapter_res {
@@ -731,6 +739,9 @@ union hpi_adapterx_res {
u32 length;
u32 version;
} query_flash;
+ struct {
+ u32 yes;
+ } irq_query;
};
struct hpi_stream_msg {
@@ -742,6 +753,7 @@ struct hpi_stream_msg {
u32 time_scale;
struct hpi_buffer buffer;
struct hpi_streamid stream;
+ u32 threshold_bytes;
} u;
};
@@ -828,6 +840,11 @@ union hpi_mixerx_res {
u32 p_data; /* pointer to data array */
u16 more_to_do; /* indicates if there is more to do */
} gcabi;
+ struct {
+ u32 total_controls; /* count of controls in the mixer */
+ u32 cache_controls; /* count of controls in the cac */
+ u32 cache_bytes; /* size of cache */
+ } cache_info;
};
struct hpi_control_msg {
--
1.7.0.4
next prev parent reply other threads:[~2011-02-10 4:26 UTC|newest]
Thread overview: 30+ messages / expand[flat|nested] mbox.gz Atom feed top
2011-02-10 4:25 [PATCH] asihpi: Update from 4.04 to 4.06 linux
2011-02-10 4:25 ` [PATCH 01/28] Switch to dev_printk linux
2011-02-10 4:25 ` [PATCH 02/28] Poison adapter_index in message. Remove unused function linux
2011-02-10 4:25 ` [PATCH 03/28] Simplify debug logging linux
2011-02-10 4:25 ` [PATCH 04/28] HPI 4.05.14 linux
2011-02-10 4:25 ` [PATCH 06/28] Rewrite PCM timer function. Update control names linux
2011-02-10 4:26 ` [PATCH 07/28] Add adapter index to cache info for debug linux
2011-02-10 4:26 ` [PATCH 08/28] Add include guard linux
2011-02-10 4:26 ` [PATCH 09/28] Checkpatch line lengths etc linux
2011-02-10 4:26 ` [PATCH 10/28] Update error codes linux
2011-02-10 4:26 ` [PATCH 12/28] Reduce number of error codes returned to upper layers linux
2011-02-10 4:26 ` [PATCH 13/28] Code cleanup linux
2011-02-10 4:26 ` [PATCH 14/28] Remove int flag polling code preparing for stream interrupts linux
2011-02-10 4:26 ` [PATCH 15/28] Cosmetic + a minor comments linux
2011-02-10 4:26 ` [PATCH 16/28] Replace adapter list with single item in subsys response linux
2011-02-10 4:26 ` [PATCH 17/28] Add snd_card_set_dev to init linux
2011-02-10 4:26 ` [PATCH 18/28] Add volume mute control linux
2011-02-10 4:26 ` [PATCH 19/28] Allow adapters with duplicate index jumpers to be discovered linux
2011-02-10 4:26 ` [PATCH 20/28] Clarify firmware id selection linux
2011-02-10 4:26 ` [PATCH 21/28] Remove unused code and data linux
2011-02-10 4:26 ` [PATCH 22/28] Use consistent err return variable, change some bad variable names linux
2011-02-10 4:26 ` linux [this message]
2011-02-10 4:26 ` [PATCH 24/28] Minor define updates linux
2011-02-10 4:26 ` [PATCH 25/28] Ensure all adapter data is cleared on device removal linux
2011-02-10 4:26 ` [PATCH 26/28] Tighten firmware version requirements linux
2011-02-10 4:26 ` [PATCH 27/28] Fix outstream start trigger for non-mmap adapters linux
2011-02-10 4:26 ` [PATCH 28/28] HPI v4.06 linux
2011-02-10 17:52 ` [PATCH] asihpi: Update from 4.04 to 4.06 Takashi Iwai
2011-02-10 23:19 ` Eliot Blennerhassett
[not found] ` <4D54488D.5030803@audioscience.com>
2011-02-11 6:23 ` Takashi Iwai
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1297311981-30448-24-git-send-email-linux@audioscience.com \
--to=linux@audioscience.com \
--cc=alsa-devel@alsa-project.org \
--cc=eblennerhassett@audioscience.com \
--cc=patch@alsa-project.org \
--cc=tiwai@suse.de \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox